GBP
Description
The Hitec DB961WP Waterproof Brushless Metal Case Digital Servo - 55kg - 0.15s, part number 2221303, is a high-torque digital servo for demanding radio-controlled models. Its IP-67-rated waterproof construction provides protection in wet and challenging environments, while the black anodised metal case adds strength and durability. Suggested compatibility includes aircraft, boats and 1/10 to 1/4-scale cars. The brushless motor works with durable steel gears, dual ball bearings and a hardened steel output shaft to provide reliable control under load. At 7.4 V, the servo delivers 55 kg.cm of torque with a 0.15-second speed, while operation at 6.0 V gives a 0.18-second speed and the same stated torque. A wide 4.8–7.4 V input range supports flexible installation in suitable radio-control systems.
Programmable Control
Part of Hitec’s D series, the DB961WP uses a 32-bit CPU and 4096 resolution for rapid, high-resolution response. Its programmable functions allow the servo to be configured for the requirements of a particular model, including end points, direction, fail-safe behaviour, dead band, speed reduction, soft start and overload protection. The 25-tooth output spline and standard servo format should be checked against the intended installation before fitting.
Specifications
- Speed: 0.18 seconds at 6.0 V; 0.15 seconds at 7.4 V
- Torque: 55 kg.cm at 6.0 V and 7.4 V
- Input voltage: 4.8–7.4 V
- Output spline: 25 teeth
- Dimensions: 40 x 20 x 39 mm
- Weight: 90 g
- Construction: black anodised metal case with brushless motor
- Water resistance: IP-67 rated
Secured by Stripe
Specifications
This IP-67-rated waterproof, brushless servo is suitable or all types of R/C model including, aircraft, boats and 1/10 to 1/4-scale cars. Sporting a black anodised metal case it's also a precision-engineered thing of beauty that, commensurate with Hitec s entire 'D series, is powered by a 32-bit CPU offering rapid, high resolution response, unprecedented programmability and a wide voltage capability. It's a combination that delivers leading-edge performance for all your radio control needs. The DB961WP is tough too. With incredibly durable steel gears, dual ball bearings and a hardened steel output shaft, it offers mighty torque and the reliability to keep you flying, driving and sailing in even the most hostile environment.
Specification:
| Speed at 6.0V (sec): | 0.18 |
| Speed at 7.4V (sec): | 0.15 |
| Torque at 6.0V (kg.cm): | 55 |
| Torque at 7.4V (kg.cm): | 55 |
| Spline (teeth): | 25 |
| Input Voltage (V): | 4.8 to 7.4 |
Hitec DB961WP Waterproof, High Torque, Metal case Servo Tech Specs:
Hitec DB961WP Waterproof, High Torque, Metal case Servo Key Features:
- This IP-67-rated waterproof, brushless servo is suitable or all types of R/C model including, aircraft, boats and 1/10 to 1/4-scale cars. Sporting a black anodised metal case it's also a precision-engineered thing of beauty that, commensurate with Hitec s entire 'D series, is powered by a 32-bit CPU offering rapid, high resolution response, unprecedented programmability and a wide voltage capability. It's a combination that delivers leading-edge performance for all your radio control needs. The DB961WP is tough too. With incredibly durable steel gears, dual ball bearings and a hardened steel output shaft, it offers mighty torque and the reliability to keep you flying, driving and sailing in even the most hostile environment.
Specification:
Speed at 6.0V (sec): 0.18 Speed at 7.4V (sec): 0.15 Torque at 6.0V (kg.cm): 55 Torque at 7.4V (kg.cm): 55 Spline (teeth): 25 Input Voltage (V): 4.8 to 7.4 - 32-bit CPU.
- 4096 resolution.
- Programmable.
- Wide operating voltage (4.8 - 7.4 volts DC).
- Dual ball raced output shaft.
- Brushless motor.
- Full metal black anodised case.
- 25 tooth output spline.
- Waterproof to IP-67 specification.
- End Point programming.
- Direction programming.
- Fail-safe programming.
- Dead band programming.
- Speed reduction programming.
- Soft start programming.
- Overload protection programming.
Hitec DB961WP Waterproof, High Torque, Metal case Servo Tech Specs:
- Weight: 90g / 3.17oz
- Shipping Weight: 0.15kg / 0.34lbs
- Product Height: 39mm / 1.54in
- Product Width: 20mm / 0.79in
- Product Length: 40mm / 1.57in
- Servo Size: Standard
Key Info:
- Brand: Hitec
- Part No: 2221303
- Barcode: 669962369619
Delivery & Returns
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Customer Reviews
No specific product reviews yet, why not write one?Questions & Answers
For more in depth queries, please contact us.