GBP
Description
Milliput Metallic Black (10 pcs) is a two-part epoxy putty from Milliput, supplied under part number 5525168. It is intended for repairs, modelling and bonding where a black surface is required without painting after curing. The putty is supplied as two components that are mixed before use, becoming soft and highly adhesive before gradually hardening.
At normal temperatures of 20–25°C, the mixed putty becomes hard in approximately three to four hours. Applying heat can reduce the setting time to a few minutes. Once fully cured, Metallic Black Milliput can be drilled, filed, sawn, sanded, tapped, turned, machined and painted. It is non-shrinking, electrically insulating and resistant to water, heat and chemicals, with heat resistance stated up to 130°C.
Applications
The black colour makes this epoxy putty suitable for repairs and finishing work on a range of dark or contrasting surfaces. Typical applications include:
- Antique clock repairs
- Guttering
- Ebonised wood
- Marble and slate
- Cast iron
- Basalt ceramics
- Black plastic parts
- Jewellery making
Milliput bonds to itself and to materials including wood, brick, cement, metals, concrete, plastics and glass. It can also set under water. It should be used as a mouldable putty rather than as a thin-layer adhesive, paste or mucilage. The putty can be manipulated like modelling clay and moulded into shape before setting.
Storage and Handling
Store the two components in cool, dry conditions and reseal the bags after use. Stored correctly, the unmixed product should remain workable for about two years. If mixing is interrupted, the putty can be placed in a deep freezer for up to 36 hours to hold it at approximately the same stage of setting. Allow it to warm in the hand before continuing. Eye protection is advisable when drilling, filing or sanding the cured material.
Secured by Stripe
Specifications
Metallic Black Milliput
Two Part Epoxy Putty (113.4gm)
Metallic Black Milliput is one of the most recent addition to our range of products. Ideal if you want to match a black surface without painting it afterwards. Once cured the beauty of Milliput is that it can be drilled, filed and sanded while still retaining its adhesive properties and bonding strength.
Typical applications:
- Repair of antique clocks
- Guttering
- Ebonised wood
- Marble
- Slate
- Cast iron
- Basalt ceramics
- Black plastic parts
- Automotive applications
- Jewellery making
Milliput is the trade name for our epoxy putty. Milliput produce five grades: Standard Yellow/Grey, Silver Grey, Superfine White, Terracotta, and the latest addition - Milliput Black. Each grade is presented in similar packs containing 2 x 56.7gm. sticks and the general instructions for preparation and usage are the same.The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25C) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process). Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130C. Shelf Life: We recommend Milliput is stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years.
A "Cool" Tip!
If you are interrupted while you are mixing Milliput, you can put the Milliput into a deep freezer until you can get back to work. This will keep the product at approximately the same state of setting at which it was frozen for up to 36 hours. Simply remove the now frozen product from the freezer and warm in the hand and it is ready to use. If stored immediately on mixing it retains its sticky nature.Milliput Metallic Black (10 pcs) Features:
- Self hardening
- Non shrinking
- Tough and durable
- Sets underwater
- Electrically insulating
- Water, heat and chemical resistant
- Highly adhesive to most materials
- Moulds like putty - sets like rock
- Can be manipulated like modelling clay
Key Info:
- Brand: Milliput
- Part No: 5525168
- Barcode: 0745314017497
Delivery & Returns
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Customer Reviews
No specific product reviews yet, why not write one?Questions & Answers
For more in depth queries, please contact us.