MSC-60BR-WP Waterproof ESC

The MSC-60BR-WP is a powerful and durable speed controller that is fantastic for all RC vehicles equipped with a brushed motor of 12 turns or more. The MSC-60BR-WP is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud!

If you've got plenty of power to strap into your RC, you can count on the MSC-60BR-WP to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries.

Features:
2S or 3S LiPo with voltage protection
5-9 cell NiMH or NiCd
Suitable for all types of 1/10th scale vehicles

Specification:
Forward Continuous Current: 60A
Forward Continuous Current: 60A
Forward Burst Current: 360A
Reverse Continuous Current: 230A
Reverse Burst Current: 180A
Input: 2-3S LiPo, 5-9 cell NiMH/NiCd
Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat
Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v
Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v
Resistance: FWD 0.001 Ohm, BWD 0.002 Ohm
PWM Frequency: 1 KHz
BEC: 6V/3A
Battery Connector: Tamiya
Dimensions: 36.5x32x18mm
Weight: 39g

NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.

Download PDF instructions for #150637 (7.7 MB)

• Brand: Maverick
• Part No: MV150637
• Barcode: 5050864032117