GBP
€ Euro
$ USD
Oracover Air Medium 2M Chrome Yellow (094)
Brand: Oracover
Part No: ORA321-094-002
Shadow Stock: Usually ships next day
Oracover AIR Medium 2m Chrome Yellow (094) is a lightweight polyester covering film designed for light constructions where minimum weight is essential. Supplied as a 2,000 x 600 mm sheet in Chrome Yellow, this AIR Medium variant (approx. 34 µm) is ideal for indoor flyers, park flyers, and, per the manufacturer, blimps and airships up to around 4 m in length. It has no adhesive layer; use a brushed-on hotmelt adhesive before shrinking with a covering iron. Part number ORA321-094-002.
Key Features
- Colour-fast finish with no bleeding at seams when ironing.
- Ultra-light polyester film for weight-critical builds.
- No adhesive layer; apply hotmelt adhesive to the surface.
- AIR Medium (~34 µm) for larger lightweight projects.
- High-visibility Chrome Yellow (094) colour.
Specifications
- Length: 2,000 mm
- Width: 600 mm
- Material: Polyester
- Colour: Chrome Yellow (094)
Recommended Accessories
- ORACOVER AIR Hotmelt Adhesive (brush-on) for bonding and three‑dimensional adhesion in wood fibres.
- ORACOVER AIR Special Thinner to restore adhesive brushing viscosity if needed.
Application Notes
- Sand the wood and remove dust (vacuum).
- Stir the adhesive thoroughly.
- Apply 1–2 thin, even coats with a brush.
- Allow to dry at least 10 hours (do not resand).
- Cover and heat-shrink the ORACOVER AIR film as usual.
- Approx. productivity: about 1 tin per 1 m²; unsuitable for surfaces not resistant to organic solvents.
Secured by Stripe
Key Features
- Colour-fast - there is no 'bleeding' at the edges when ironing over seams.
-
The covering for light constructions.
Wherever minimum weight is demanded, wherever weight has to be reduced to its limits, ORACOVER® AIR is the product to be applied.
Whether indoor flyers, park flyers, blimps or airships are to be built, ORACOVER® AIR will do the covering job.
In contrast to regular ORACOVER®, ORACOVER® AIR has no adhesive layer.
The hotmelt adhesive is to be brushed onto the surface.
ORACOVER® AIR MEDIUM (approx.34 µm), for blimps and airships up to 4 m length.
RECOMMENDED ACCESSORY :
ORACOVER® AIR Hotmelt Adhesive ORACOVER AIR Adhesive (100 ml) Unstable wood fibres can become insecure and can rip off due to the weight. The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.
Our tip: For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed with ORACOVER® AIR Hotmelt Adhesive.
The ORACOVER® AIR Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood.
With that you reach an excellent three-D adhesion of the ORACOVER® AIR film with the surface.
With the ORACOVER® AIR Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.
Application of the ORACOVER® AIR Hotmelt Adhesive:
1. Sand your wood completely and remove the swarf (vacuum).
2. Stir up well the contents of the tin.
3. Apply the ORACOVER® AIR Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush.
4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand).
5. Cover your model as always with the thermal shrink fabric covering ORACOVER® AIR.
Productivity: approx. 1 tin / 1m² Unsuitable for surfaces which are not resistant to organic solvents.
ORACOVER® AIR SPECIAL THINNER If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.
Weights & Dimensions
| Shipping Weight | 0.09kg | 0.20lbs |
| Product Width | 600mm | 23.62in |
| Product Length | 2,000mm | 78.74in |
- Colour: Chrome Yellow
- Material: Polyester
Key Info:
- Brand: Oracover
- Part No: ORA321-094-002
- Barcode: 5051121144772
- Material: Oracover
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.