GBP
€ Euro
$ USD
Oracover Air Outdoor 2M Trans Yellow (039)
Brand: Oracover
Part No: ORA321-039-002
Shadow Stock: Usually ships next day
Oracover Air Outdoor 2M Trans Yellow (039) is a lightweight heat‑shrink polyester covering film from Oracover, designed for light constructions where minimum weight is essential. Supplied as a 600 mm x 2,000 mm roll in Transparent Yellow, part number ORA321-039-002. Unlike regular ORACOVER, the AIR variant has no adhesive layer and is used with a brushed‑on hotmelt adhesive. It is suited to indoor flyers, park flyers, blimps and airships, and is also popular as a base material for model sails.
Key Features
- Colour‑fast finish with no bleeding at seam edges when ironing.
- ORACOVER AIR OUTDOOR film approx. 23 µm for more solid light aircraft and park flyers.
- No pre‑applied adhesive; use with ORACOVER AIR Hotmelt Adhesive.
- Material: Polyester; Colour: Transparent Yellow (039).
Weights & Dimensions
- Width: 600 mm (23.62 in)
- Length: 2,000 mm (78.74 in)
- Shipping weight: 0.09 kg
Recommended Accessory
- ORACOVER AIR Hotmelt Adhesive (100 ml) for optimal pre‑treatment and strong adhesion; approx. 1 tin per ~1 m². Unsuitable for surfaces not resistant to organic solvents.
- ORACOVER AIR Special Thinner to restore brushing viscosity if the adhesive thickens.
Application Steps
- Sand the wood thoroughly and remove swarf (vacuum).
- Stir the adhesive well.
- Brush on 1–2 thin, even coats of ORACOVER AIR Hotmelt Adhesive.
- Allow to dry overnight, at least 10 hours (do not re‑sand).
- Cover as usual with ORACOVER AIR thermal shrink covering.
Secured by Stripe
Key Features
- Colour-fast - there is no 'bleeding' at the edges when ironing over seams.
-
The covering for light constructions.
Wherever minimum weight is demanded, wherever weight has to be reduced to its limits, ORACOVER® AIR is the product to be applied.
Whether indoor flyers, park flyers, blimps or airships are to be built, ORACOVER® AIR will do the covering job.
In contrast to regular ORACOVER®, ORACOVER® AIR has no adhesive layer.
The hotmelt adhesive is to be brushed onto the surface.
ORACOVER® AIR OUTDOOR (approx.23 µm), the best choice for more solid light aircraft, park flyers, etc. ORACOVER® AIR OUTDOOR has not only proved itself as covering film for model airplanes, but becomes more and more popular as base material for model sails.
RECOMMENDED ACCESSORY :
ORACOVER® AIR Hotmelt Adhesive ORACOVER AIR Adhesive (100 ml) Unstable wood fibres can become insecure and can rip off due to the weight.
The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.
Our tip: For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed with ORACOVER® AIR Hotmelt Adhesive.
The ORACOVER® AIR Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood. With that you reach an excellent three-D adhesion of the ORACOVER® AIR film with the surface.
With the ORACOVER® AIR Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.
Application of the ORACOVER® AIR Hotmelt Adhesive:
1. Sand your wood completely and remove the swarf (vacuum).
2. Stir up well the contents of the tin.
3. Apply the ORACOVER® AIR Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush.
4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand).
5. Cover your model as always with the thermal shrink fabric covering ORACOVER® AIR.
Productivity: approx. 1 tin / 1m² Unsuitable for surfaces which are not resistant to organic solvents.
ORACOVER® AIR SPECIAL THINNER If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.
Weights & Dimensions
| Shipping Weight | 0.09kg | 0.20lbs |
| Product Width | 600mm | 23.62in |
| Product Length | 2,000mm | 78.74in |
- Colour: Transparent Yellow
- Material: Polyester
Key Info:
- Brand: Oracover
- Part No: ORA321-039-002
- Barcode: 505112114486
- Material: Oracover
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.