RC4WD 1:14 Earth Mover RC693T Hydraulic Track Loader RC4WD

The RC4WD 1:14 Earth Mover RC693T Hydraulic Track Loader (part no. VV-JD00059) is a fully assembled RTR construction model engineered for demanding tasks. A robust brushless hydraulic system with an adjustable pump powers the loader functions, while a welded steel bucket provides precise control for loading and grading. For compacted surfaces, the rear ripper adds extra digging capability. A 9‑channel 2.4GHz radio delivers comprehensive control straight out of the box.

Built with alloy zinc and aluminium castings, heavy-duty hoses and all-terrain metal crawler tracks, the RC693T is designed for durability and consistent performance. Drive comes from a 540 brushed monster torque motor, and with a suitable 5200mAh 3S LiPo, typical run time is up to 38 minutes.

Key Features

• Alloy zinc and alloy aluminium casting (except track and hydraulic pump)
• Reliable brushless hydraulic system with adjustable pump
• Welded steel bucket
• 9 channel 2.4GHz radio
• Heavy-duty hoses
• Full metal scale construction
• All-terrain metal crawler tracks
• 540 brushed monster torque motor
• Manufactured by JDCustoms

Technical Specifications

• Scale: 1:14
• Length: 24.6in / 627mm
• Width: 8.66in / 220mm
• Height: 10.9in / 278mm
• Dead weight: 15kg / 33lbs
• Maximum bucket force (up): 13kg / 28.6lbs
• Run time: 38 minutes (5200mAh battery)
• 30 days limited warranty

What’s Included

• 1x 1/14 Earth Mover RC693T Hydraulic Track Loader (RTR)

Required To Complete

• 3S LiPo battery
• 4x AA batteries for radio
• Gens ace 5200mAh 11.1V 25C 3S LiPo Battery Pack with XT60 plug
• Chevron AW ISO 32 Hydraulic Oil 14oz (Z-X0042)
• Compatible charger for 3S LiPo battery

Instruction Manual

• Click here to download

Notes

• While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases, you may want to apply threadlock to some of the hardware that is already installed.
• ESC supports bullet connector.
• Use good quality hex drivers to avoid stripping screw heads.
• Use thread lock when putting metal screws into metal parts.
• Steps marked with an asterisk (*) require thread lock.
• Use thread lock sparingly.
• Do not over tighten screws otherwise you may strip the thread.