EUR
£ GBP
$ USD
RPM Front / Rear Arms For Traxxas Slash/Stampede/Rustler/Hoss 4x4 - 1 Pair - Red (Replace TRX3655)
Brand: RPM
Part No: RPM80709
Shadow Stock: Usually ships next day
RPM80709 A-arms bring proven RPM durability to Traxxas 1:10 4×4 platforms. This red pair tightens hinge-pin tolerances to help virtually eliminate suspension slop and cuts fore–aft movement at the axle carriers by better than 90%. Each arm is 6.5 g lighter than Traxxas #3655X, trimming close to an ounce across a full truck. Moulded from RPM’s tough nylon and styled with 30° leading and trailing edges, they offer strength, precision and a clean look.
Features
- Supplied as 1 pair: left and right A-arm
- Reduced slop with tighter hinge-pin tolerances
- Approx. 6.5 g lighter per arm versus Traxxas #3655X
- Reinforced bosses for shocks and sway bar mounts
- Industry-leading RPM warranty; designed and manufactured in the USA
- Part number RPM80709; colour: red
Suggested Compatibility
- Traxxas Slash 4×4 (1:10)
- Traxxas Rustler 4×4
- Traxxas Stampede 4×4
- Traxxas Hoss 4×4
- Traxxas Rally 4×4 (not Rally ST)
Tech Notes
- Replaces Traxxas #3655R and #3655X
- Two packages required to complete one full vehicle (front and rear)
- The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening that reduces clearance around the rear axle
Secured by Stripe
RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done:
We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!
We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from.
RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!
Tech Notes:
Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle.
*Weight comparison based on Traxxas #3655X.
Quick Notes:
– fits the 1:10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4
– does not fit the Rally ST (please see RPM #73362)
– each a-arm is 6.5 grams lighter than stock*!
– 2 packages needed to complete one full vehicle (front & rear)
– replaces stock Traxxas #3655R & #3655X.
Key Info:
- Brand: RPM
- Part No: RPM80709
- Barcode: 672415807095
- Fitment: Option Part
Additional Categories:
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.