Kyosho Mini-Z AWD - Nissan Skyline 2000 GT-R KPGC10 Silver (MA020/KT531P)
Brand: Kyosho
Part No: K.32636S
Out Of Stock
Request Stock NotificationAdd some AAA batteries to get up and running
OL-3536
Saves $16.19 over RRP
The Kyosho Mini-Z AWD Readyset pairs the MA-020 chassis with the iconic Nissan Skyline 2000 GT-R (KPGC10) in silver for precise, small‑space drifting. With four-wheel drive, pre-installed drift tyres and the 2.4GHz Syncro KT-531P transmitter, it delivers smooth control and impressive scale detail straight from the box. This Kyosho Readyset (part number K.32636S) features VCS front suspension, full ball bearings and electronics that are ready for the optional gyro for enhanced stability.
Key Features
- MINI-Z AWD Readyset based on MA-020 (MA-020-N) chassis
- Special circuit board with optimised steering control program and on-chassis gyro sensitivity adjustment
- VCS (Variable Camber Suspension) at the front; tool-free front coil spring changes
- Strut-type rear suspension for consistent traction
- Four-wheel drive with drift tyres installed as standard
- Factory-finished body with injection-moulded over fenders, chrome bumper and grille, plus replica GT-R emblem
- Fully ball-raced drivetrain with 14 ball bearings
- Syncro KT-531P transmitter with steering/throttle trims, steering dual rate, LED flashing speed control and Training Mode
- Special AWD chassis based on MA-02 featuring RA45 unit
- Wide range of optional parts available
Technical Data
- Length: 163.0 mm
- Width: 67.0 mm
- Height: 51.0 mm
- Wheelbase: 94.0 mm (L)
- Tread (F/R): 56.5 mm / 56.5 mm
- Front wheel offset: Narrow ±0.0 mm
- Rear wheel offset: Narrow ±0.0 mm
- Chassis: MA-020-N
- R/C system: Syncro KT-531P
What’s Included
- R/C unit built-in complete chassis
- Painted and marked complete body
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gears: 15T, 17T, 19T, 21T
- Spur gears: 27T, 29T, 31T
- Spare nut, wheel wrench and pinion removal tool
Requirements To Run
- AAA-size alkaline or Ni-MH batteries x4 for the chassis
- AAA-size alkaline batteries x4 for the transmitter
Notes On Compatibility
- Suggested compatibility with nearly all ASC MINI-Z bodies; additional parts may be required for some body styles
- Only compatible with the special gyro unit MZW446 (sold separately); on-chassis adjustment dial provided
- Optional ICS cannot be used
- Specially designed for the KT-531P transmitter; not compatible with KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters
Secured by Stripe
AWD series is a Four Wheel Drive chassis with Drift tires and paired with the
Syncro KT-531P Transmitter. Perfect for drifting in small spaces.
To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional gyro unit MZW446 (Sold separately). The gyro can be adjusted by turning a small volume dial on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price. Simply install the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy.
●MINI-Z AWD Readyset based on MA-020 chassis.
●Special circuit board updated with optimized steering control program.
●Chassis features gyro sensitivity adjustment function.
●Drift tires are installed as standard.
●Readyset requires only batteries to be ready for action!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands.
●Factory completed body comes with display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber in accordance with suspension stroke.
●Coil spring on front suspension can be easily replaced without tools.
●Wide range of optional parts is available to be installed.
●Note: Optional ICS can NOT be used. Also, this model is specially designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is only compatible with the special gyro unit MZW446 (sold separately).
Body style is all about scale and detail. Injection molded accessory parts such front and rear over fenders combine with chrome bumper and grille, and the replica GT-R emblem puts the finishing touch.
Includes stylish design of Syncro KT-531P transmitter. Features steering / throttle trim as well as dual rate adjustment of steering angle and control the flashing speed of optional LEDs. In addition, the transmitter has a Training Mode feature which limits speed of the car for easy learning (default setting at the time of shipment is Training Mode).
Special AWD chassis is based on the MA-02 chassis and features the RA45 unit.
Features VCS front suspension that optimizes camber change in concert with suspension stroke. Replacement of front suspension coil springs is easy with no tools required.
Equipped with strut-type rear suspension.
Full bearing specifications include 14 ball bearings.
Equipped with drift tires as standard.
Equipped with special mount space and gyro adjustment volume dial for the optional gyro unit MZW446 (sold separately).
TECHNICAL DATA
■Length 163.0mm
■Width 67.0mm
■Height 51.0mm
■Wheelbase 94.0mm(L)
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +-0.0mm
■Rear Wheel Offset Narrow +-0.0mm
■R/C System Syncro KT-531P
KIT CONTENT
● R/C unit built-in complete chassis
● Painted and marked complete body
● Syncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
REQUIREMENT TO RUN
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
Key Info:
- Brand: Kyosho
- Part No: K.32636S
- Barcode: 4548565446490
- Scale: 1:28
- Build Level: Assembled (RTR)
- Power Source: Electric - Brushed
- Surface Type: On Road
- Vehicle Type: Touring / Rally Car
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.








Kyosho Sp Suspension Bushes For Mini-Z Awd Dws
Kyosho Mini-Z AWD MA020 Setting Tie Rod Set
Multi Link Upper Rod Set Kyosho Mini-Z AWD DWS
KYOSHO Bodyshell Toyota GR Supra TRD Mini-Z + 4WD Rims (White Body)
Kyosho Suspension Spring Set Mini-Z Awd
Kyosho Autoscale Mini-Z Lancia Delta No.4 Monte Carlo Winner (MA020)
Kyosho Autoscale Mini-Z Skyline 2000GT-R KPCG10 Racing 72 Red No.6 (MA020)
Universal Drive Shaft Kyosho Mini-Z MA020 (4)
Kyosho Setting Spring Set Mini-Z Awd Dws
Kyosho Ball Bearing 6x10x3.0mm (2) BRG022
Ball End Caps for MDW110 (L-S/2set/DWS Multi Link) Kyosho Mini-Z AWD
KYOSHO Bodyshell Dodge Challenger SRT Mini-Z + 4WD Rims (White Body)
Kyosho Autoscale Mini-Z Skyline GT-R Nismo R32 White (MA020)
Kyosho Bind Head 2.0X8mm Tp Screws (10)
Kyosho Spur Gear For Mini-Z Awd Ball Differential