Your Cart: £0.00

Spend £100.00 more for free shipping!

View Cart and Checkout

E Flite Timber X - BNF Basic with AS3X and SAFE Select

Brand: E Flite

Part No: EFL38500

£296.99 RRP £329.99

In Stock: Usually ships same day

Collect Instore

Add a battery, charger and transmitter to get you up and running in no time!

1 x Spektrum DXS Transmitter Only
SPMR1010
1 x Spektrum SMART G2 Powerstage Air Bundle - 3S 2200mAh LiPo Battery + S120 Charger
SPMXPSA200

Saves £50.40 over RRP

Add a battery, charger and transmitter to get you up and running in no time!

1 x Spektrum DXS With AR410 Receiver
SPM1010
1 x Spektrum SMART G2 LiPo Battery - 14.8V 2200mAh 4S 100C - IC3
SPMX224S100
1 x Spektrum S155 G2 1 x 55W AC Smart Charger
SPMXC2050I

Saves £63.50 over RRP

The E Flite Timber X 1.2m BNF Basic with AS3X and SAFE Select (part EFL38500) blends true STOL performance with eXtreme 3D capability. A re-engineered wing, oversized ailerons and flaps, plus enlarged elevator and rudder deliver crisp control from mild to wild. A high-power 3S/4S brushless setup with a 50A ESC, composite‑reinforced EPO airframe and six metal‑geared servos equip this Timber X to fly hard from a variety of surfaces using its shock‑absorbing tundra‑style landing gear.

Factory‑installed LED landing, navigation and strobe lights enhance visibility, while optional-use leading edge slats are included to further improve slow flight and STOL. Optional EDO‑style floats (EFL5261, sold separately) are available, with suggested compatibility also noted with the float set from the original Timber 1.5m.

Key Features

  • Incredible STOL plus 3D aerobatic capability
  • Enlarged, oversized control surfaces with double‑bevelled hinge lines
  • Six durable, factory‑installed high‑torque, metal‑geared servos
  • High‑power 3S and 4S capable brushless outrunner motor with 50A ESC
  • Spektrum AR631 6‑channel DSMX receiver with AS3X stabilisation
  • Optional‑use SAFE Select flight envelope protection
  • Shock‑absorbing landing gear with oversized tundra‑style wheels
  • Factory‑installed LED landing, navigation and strobe lights
  • Lightweight, durable composite‑reinforced, hollow‑core EPO construction
  • Optional‑use leading edge slats for improved slow flight and STOL
  • Optional EDO‑style floats (EFL5261, sold separately)

SAFE Select Features (Optional)

  • Pitch and bank angle limits
  • Automatic self‑levelling
  • Easy switch assignment with no complex programming

Specifications

  • Completion level: Bind‑N‑Fly Basic
  • Power type: Electric
  • Motor size: 900Kv brushless outrunner
  • ESC: 50A (installed)
  • Receiver: Spektrum AR631 6‑channel (installed)
  • Servos: 6x high‑torque, metal‑geared (installed)
  • Propeller size: 13 x 4
  • Wingspan: 47.5 in (1207 mm)
  • Wing area: 527.3 sq in (34.0 sq dm)
  • Product length: 41.5 in (1054 mm)
  • Material: EPO
  • Flaps: Yes
  • Approx. assembly time: Less than 1 hour
  • Approx. flight time: 4–6 minutes
  • CG: 95 mm ± 7 mm back from leading edge at fuselage
  • Skill level: Level 2
  • Trim scheme colours: White, black and grey
  • Technology: AS3X and SAFE Select

In The Box

  • E Flite Timber X 1.2m airframe
  • 50A brushless ESC (installed)
  • Brushless outrunner motor (installed)
  • Six high‑torque, metal‑geared servos (installed)
  • Spektrum AR631 6‑channel receiver (installed)
  • Set of optional‑use leading edge slats
  • Product manual

Needed to Complete

  • Full‑range, 6+ channel DSMX/DSM2 transmitter
  • 2200–3200 mAh 3S or 4S 11.1–14.8V LiPo with EC3 or IC3 connector
  • Compatible LiPo charger

Introduction

The original Timber® captured the thrill of incredible Short Takeoff and Landing (STOL) capabilities in a design featuring sporty flight performance and ultra-friendly handling. From low-time to very experienced pilots, nearly everyone enjoys flying the Timber–but some wish it had even more aerobatic capability. The E-flite® Timber X 1.2m combines the STOL capabilities of the original model with a new wing design featuring oversized ailerons and flaps, plus an enlarged rudder and elevator and a more powerful 3S and 4S compatible power system, to also deliver 3D performance you'd expect from an all-out aerobat!

Features

  • Incredible Short Takeoff and Landing (STOL) plus 3D capabilities
  • Enlarged and oversized control surfaces with double-beveled hinge lines
  • Six durable and factory-installed high-torque, metal-geared servos
  • High-power 3S and 4S compatible brushless outrunner motor and 50-amp ESC
  • Spektrum™ AR631 6-channel receiver with industry-leading DSMX® technology
  • Unmatched stability and precision of AS3X® technology for smoother flight performance
  • Easy to fly with optional-use SAFE® Select flight envelope protection
  • Shock-absorbing landing gear with oversized tundra-style wheels
  • Functional and factory-installed LED landing, navigation and strobe lights
  • Lightweight yet durable composite-reinforced, hollow-core EPO construction
  • Optional-use leading edge slats for improved STOL and slow flight performance
  • Optional EDO-style floats (EFL5261, sold separately)

Overview

The E-flite® Timber® X 1.2m unleashes a new era of STOL plus 3D aerobatic capability. Based on the extremely popular Timber 1.5m model but featuring a new wing design, oversized control surfaces plus a 3S and 4S compatible power system, it offers an even wider flight envelope to deliver a truly "mild to wild" experience. Hollow-core EPO construction with composite reinforcement results in a lightweight yet strong airframe that's capable of handling extreme aerobatic maneuvers while keeping the wing loading low for impressive Short Takeoff and Landing (STOL) and slow flight performance. It's also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear of the original model so you can fly as aggressively as you want from almost any surface. You can even install the included leading edge slats for improved slow flight performance, or the optional floats (EFL5261, sold separately) so you can fly from water. Add in the LED landing, navigation and strobe lights plus many of the other popular features of the original, and the Timber X is a model almost every pilot can appreciate and enjoy!

 

On The Fly

 

See The Timber X In Action!

 

eXtreme Maneuverability

The Timber® X 1.2m features a new wing design with a shortened span plus much larger ailerons and flaps, along with an enlarged elevator and rudder. Double-beveled hinge lines make it possible to deflect every control surface, including the flaps that can now travel in both directions, to high angles for outstanding control and eXtreme 3D aerobatic capability. Pockets in the rear of the fuselage and the included optional-use steel stabilizer joiner give you additional options to fine-tune the model's performance for even wilder 3D setups–or on low rates the controls can be as smooth and docile as they are on the original so you can fly as mild or as wild as you'd like!

 

eXtra Power

The factory-installed brushless power system features a 50-amp ESC plus a specially-tuned motor and prop that deliver an abundance of thrust with a 3S LiPo battery, or eXtra power and unlimited vertical performance with a 4S battery without the need for any modifications or upgrades.

 

eXtremely Durable

Composite-reinforced, hollow-core construction with EPO material delivers a lightweight yet durable airframe. The Timber® X 1.2m is also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear and oversized tundra-style wheels of the original model so you can fly aggressively from almost any surface.

 

STOL (Short Takeoff and Landing) Capable

The new wing design has a shorter span yet almost as much wing area as the original, plus it features drooped wingtips and can be equipped with the included optional-use leading edge slats for improved slow flight and STOL performance. These features, along with the lightweight design, oversized flaps and high-power brushless motor, make it possible to spring into the air or float down to land in as little as two feet or less.

 

LED Lights

Like the original, the Timber® X 1.2m comes with realistic-looking LED landing, navigation and strobe lights that are factory-installed and powered from the flight battery.

 

Optional Floats

Owners of an original Timber® 1.5m model can use the float set it came with on the Timber X 1.2m, or the EDO-style float set is available separately (EFL5261) and includes the required mounting struts plus a dual-rudder steering system for excellent handling and easy takeoffs and landings on water.

 


Bind-N-Fly Completion Level Advantage

Already own a Spektrum™ transmitter? Bind-N-Fly (BNF) aircraft make getting into the air quickly and with the best control experience possible easier than ever. They come out of the box with the power system, servos and a Spektrum 2.4GHz receiver installed so all you need to do is bind the receiver to a compatible transmitter, finish any final assembly, and fly!

This Bind-N-Fly Basic model is equipped with a Spektrum 2.4GHz DSMX® receiver featuring AS3X (Artificial Stabilization–3-aXis) technology that works behind the scenes to smooth out the effects of wind and turbulence. The result is a heightened sense of stability and precision that makes you feel like you're flying a much larger, expertly tuned aircraft.

If this is your first model of its type, or you want an extra margin of safety while familiarizing yourself with the airplane, you can enable the optional-use SAFE® Select flight envelope protection technology built into the receiver. No programming is required. Simply change up the binding sequence as directed in the manual.

With SAFE Select enabled, you get:

Pitch and Bank Angle Limits

  • These envelope limits keep the airplane from rolling or pitching upside down. They also prevent excessive climb or dive angles.

Automatic Self-Leveling

  • The airplane instantly returns to and holds level flight when the sticks are released and in the center position. It's also helpful for keeping the wings level during takeoffs/launches and landings.

Easy Switch Assignment—No Complex Programming Required

  • The simple procedure for assigning a transmitter switch to turn SAFE Select features on and off doesn't require any complex programming and takes just a few seconds.

If you don't want to enable the SAFE Select features, just bind the receiver normally and it will function like a standard AS3X receiver.

 

Timber X 1.2m BNF Basic with AS3X and SAFE Select Specfications:

  • Approximate Assembly Time: Less than 1 hour
  • Approximate Flight Time: 4 - 6 minutes
  • Battery: Sold Separately
  • CG (Center of Gravity): 95mm +/- 7mm back from leading edge of wing at fuselage
  • Charger: Sold Separately
  • Completion Level: Bind-N-Fly Basic
  • Flaps: Yes
  • Power Type: Electric
  • Material: EPO
  • Motor Size: 900Kv
  • Product Length: 41.5" (1054 mm)
  • Propeller Size: 13 x 4
  • Radio: Sold Separately
  • Receiver: Included
  • Skill Level: Level 2
  • Speed Control: Included
  • Technology: SAFE Select
  • Trim Scheme Colors: White, black and gray
  • Wing Area: 527.3 sq in (34.0 sq dm)
  • Wingspan: 47.5" (1207 mm)

In The Box

  • (1) E-flite Timber X 1.2m
  • (1) 50A Brushless ESC (installed)
  • (1) Brushless Outrunner Motor (installed)
  • (6) High-Torque, Metal-Geared Servos (installed)
  • (1) Spektrum™ AR631 6-Channel Receiver (installed)
  • (1) Set of Optional-Use Leading Edge Slats
  • (1) Product Manual

Needed to Complete

  • Full-range, 6+ Channel DSMX®/DSM2® transmitter
  • 2200–3200mAh 3S or 4S 11.1–14.8V LiPo with EC3™ or IC3® Connector
  • Compatible LiPo charger


Key Info:
  • Brand: E Flite
  • Part No: EFL38500
  • Barcode: 605482762653
  • Assembly Level: BNF Basic
  • Power: Electric
  • Flying Style: Sport
Free Shipping

This item is over £100, so qualifies for free standard UK shipping!

Express Shipping

Upgrade to next day from £3

Worldwide Shipping

Available at checkout

Reviews
5/5 (1 reviews)
27th September 2023

One of the best all round planes. Superb flier. 5 stars

WRITE A REVIEW
All reviews are subject to moderation
Questions & Answers
Real questions from real customers. Why not ask your own?
Please, can I have the box dimensions? I need them to plan the transportation as dispatched luggage in my flight. Thank you.
Cecil John Pedrosa Ricardo / 31st July 2022

Packaging size approx 110 x 36 x 28 CM

Frank @ Wheelspin Models
Can it be flown with a dx6 transmitter
Andrew Doman / 26th December 2021

Yes, that would bind up fine 

Ben @ Wheelspin Models
ASK A QUESTION
Get early access to deals and new arrivals.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.

For more in depth queries, please contact us.