GBP
€ Euro
$ USD
FTX Banzai Drift RTR 1/10 4WD Brushed (FTX5529X)
Brand: FTX
Part No: FTX5529X
In Stock: Usually ships same day
Save with a Combo Package
Our recommended kit, bundled at a combined priceLooking for a step up from the basic package? Why not take a larger capacity battery coupled with a fast charger.
1× eTronix Power Pal Peak Detect NiMh Fast Charger - Mains/12v Input
1× EP Super Duty 3000mAh NiMh Stick Pack - 7.2v - Tamiya Connector
Want longer run time and a super quick charge - look no further than this combo package, supplied with TWO of our best batteries and a fast charger!
2× Voltz 5300mAh NiMh Stick Pack - 7.2v - Tamiya Connector- 1× eTronix Power Pal Peak Detect NiMh Fast Charger - Mains/12v Input
Frequently Bought With
Other items customers often buy with the FTX Banzai Drift - RTR
Description
The FTX Banzai Drift - RTR brings authentic street-style drifting to 1/10 scale with a proven platform and fully equipped electronics. Modelled around the popular FTX Vantage and Carnage design, this shaft-driven 4WD chassis arrives factory assembled with waterproof electronics and a 2.4GHz radio system for dependable control in varied conditions. Part number FTX5529X.
A pre-printed S15-style body sits over a moulded tub chassis featuring metal-geared front and rear differentials, oil-filled adjustable shocks and a centre slipper clutch to help protect the drivetrain. Front CVA universal driveshafts, full ball bearings and adjustable turnbuckles allow you to fine-tune handling, while blue anodised aluminium components add a quality finish. Hard-compound drift tyres on scale-finish wheels deliver consistent slides out of the box.
Key Features
- 4WD shaft drive with centre slipper system
- Metal-geared front and rear differentials (crown and pinion)
- Big-bore, oil-filled adjustable shocks
- Front universal (CVA) driveshafts
- Moulded tub chassis with foam front bumper
- Adjustable turnbuckles
- Adjustable suspension: droop, camber, toe-in and wheelbase
- Full ball bearings
- Blue anodised aluminium components
- Scale-finish wheels with hard-compound drift tyres
- Pre-printed S15-style drift body
- Waterproof receiver, brushed ESC and steering servo
What’s Included
- Etronix 2.4GHz radio system
- Waterproof brushed motor speed control
- Waterproof steering servo
- Waterproof receiver
- 540 brushed motor
- Voltz 1800mAh 7.2V NiMH battery
- Wall charger for the included battery
- Pre-finished S15-style body, scale wheels and drift tyres
Specifications
- Length: 440mm
- Width: 195mm
- Height: 130mm
- Wheelbase: 275 x 280mm
- Front tyre: 24 x 60mm
- Rear tyre: 24 x 60mm
- Gear ratio: 6.5:1
Secured by Stripe
FTX Banzai Drift - RTR Manuals & Guides
Manuals & Guides
Specifications
FTX BANZAI 4WD RTR 1/10 BRUSHED DRIFT CAR 2.4GHZ/WATERPROOF
Take to the streets with FTX’s new Banzai drift chassis. Modeled around the hugely popular FTX Vantage and Carnage platform, the Banzai brings Japanese drift styling to the entry level Ready-To-Run arena.
Featuring a 4wd shaft driven design with front and rear metal-geared differentials, the Banzai is 99% complete from the box. Blue anodized aluminium components add a little style to the chassis along with the functionality of oil filled adjustable shock absorbers, front CVA universal driveshafts, ball bearings, adjustable suspension turnbuckles for tuning and a centre drive slipper to protect the transmission.
A waterproof electronic speed control, servo and receiver allow for use in a wide range of conditions and the 2.4ghz radio provides interference free signal no matter where you are.
Topped off and finished with an S15 style pre-printed drift body and a hard compound drift tyre on scale finish wheels, the Banzai is the perfect introduction to sideways street action!
FTX Banzai Features:
- RTR with Etronix 2.4ghz Radio System
- Waterproof receiver
- Waterproof brushed motor speed control
- Waterproof steering servo
- 540 brushed motor
- Voltz 1800mah 7.2v NiMh battery
- Wall charger for battery
- Moulded tub chassis
- 4wd shaft drive with slipper system
- Big bore oil filled adjustable shocks
- Gearbox metal crown and pinion gear
- Front universal driveshafts
- Adjustable turnbuckles
- Adjustable suspension(droop, camber, toe-in & wheelbase)
- Foam front bumper
- Scale finished wheels
- Drift tyres
FTX Banzai Drift Spec Check:
- Length: 440mm
- Width: 195mm
- Height: 130mm
- Wheelbase: 275 x 280mm
- Front Tyre: 24 x 60mm
- Rear Tyre: 24 x 60mm
- Gear Ratio: 6.5:1
Key Info:
- Brand: FTX
- Part No: FTX5529X
- Scale: 1:10
- Build Level: Assembled (RTR)
- Vehicle Type: Drift Car
- Power Source: Electric - Brushed
- Surface Type: On Road
Additional Categories:
Delivery & Returns
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Customer Reviews
No specific product reviews yet, why not write one?Questions & Answers
This will use a standard 540 sized motor with a 3.2mm shaft.
This is about the quickest 3s system TRX3350R
Speeds are not quoted on drift cars as they spin the wheels constantly so do not grip enough to produce high speeds.
4wd will be faster and better at putting power down , tyre wise we would use these SCH-RU0569 or these SCH-JR-34RY
Yes, they are just a standard touring car wheel with 12mm hex fitment, so a wide variety of wheels and tyres are available.
Yes you can run a 7.4v however just be aware it can cause excess wear on the stock electonics.
any standard 1/10 touring car body will fit this chassis.
You would need to put the correct mounting holes in the body shell, but yes it will fit that car
Yes, these are currently in stock as I write this.
We offer next day delivery at checkout
Yes, you still get the included items - any of our combo packs are "in addition to"
No I would stick to 2S max on these
These are on Tamiya connectors
No - 2S Max
Most 200mm bodies will fit
Think these are approx 200mm
Yes these are built ready to go and include battery and charger
Yes that should fit, these are standard size
Not much to choose between those - both are great cars. I'd go for whichever you prefer the body style on :-)
These are on a 540 I believe
On the stock battery and charger it would be around 6 hour charge time and around 10-15 minute runtime.
With a fast charger, it'll be around 45-55 min charge time and better batteries will give up to around 30 mins run time
Yes you can fit other 1/10 touring car bodies on to this chassis.
This takes standard 200mm bodies.
You can adjust the camber by adjusting the top links on the suspension arms.
It's not a licensed body, so it's not a true copy of anything really. It still looks cool though!
For more in depth queries, please contact us.
