Futaba 3PR 2.4Ghz Radio With R203GF Receiver
Brand: Futaba
Part No: FUT05003049-3
In Stock: Usually ships same day
The Futaba 3PR 2.4GHz wheel-type transmitter paired with the R203GF receiver delivers dependable FHSS control for surface RC use. This 3-channel system provides straightforward setup with trims, dual rates and servo reversing, alongside core safety functions. Supplied under part number FUT05003049-3.
Operating on the 2.4GHz band with a one-way communication method, the 3PR offers an optimum operating range of up to 80m and runs on four AA batteries. The included R203GF receiver is compact and lightweight, with a wide operating voltage range to suit typical surface electronics.
Key Features
- Steering Trim: Adjust steering neutral by moving the steering trim knob left or right.
- Throttle Trim: Adjust throttle neutral by moving the throttle trim left or right.
- Steering Dual Rates: Set steering travel to suit model and surface.
- Steering Servo Reversing: Reverse the steering servo rotation direction.
- Throttle Servo Reversing: Reverse the throttle servo rotation direction.
- Throttle End Point Adjustment (EPA): Independently adjust forward and brake servo travel to fine-tune throttle response.
- CH3 Function: An additional channel for two-position servo operation. Note: CH3 does not support EPA and does not operate linearly.
Transmitter Specifications
- System: FHSS, wheel type, 3 channels
- Communication Method: One-way operating system
- Maximum Operating Range: 80m (optimum condition)
- Safety: F/S, ID
- Frequency: 2.4GHz band
- Power Requirement: 4x AA (6V)
- Current Drain: 100mA or less
- Transmission Antenna: 1/2 wavelength dipole
Receiver Specifications
- Model: R203GF
- Size: 39 x 26 x 10mm (1.54 x 1.02 x 0.39in)
- Weight: 8g (0.28oz)
- Operating Voltage: DC 4.8–7.4V
Additional Tech Specs
- Shipping Weight: 0.58kg (1.27lbs)
- Age Recommendation: 14+
- Channels: 3
- Radio Protocol: S-FHSS [Surface], FHSS
- Colour: Black
Secured by Stripe
Transmitter Specs
FHSS System, Wheel Type, 3 Channels
Communication Method:
One-way operating system
Maximum Operating Range:
80m (Optimum condition)
For Safety:
F/S, ID
Transmitter Frequency:
2.4 GHz band
Power Requirement:
(Dry Cell Battery) Penlight x 4 (6V)
Current Drain:
100 mA or less
Transmission Antenna:
1/2λ di-pole
R203GF
Size:
39 x 26 x 10 mm
1.54 x 1.02 x 0.39 in
Weight:
8 g
0.28 oz
Operating Voltage:
DC 4.8 - 7.4V
Futaba 3PR 2.4Ghz Radio With R203GF Receiver Key Features:
- Steering Trim:
Steering neutral adjustments can be made by moving the steering trim knob to the left or right. - Throttle Trim:
Throttle neutral adjustents can be made by moving the throttle trim to the left or right. - Steering Dual Rates:
Use this function to adjust the steering travel of your model. - Steering Servo Reversing:
This function reverses the rotation direction of the steering servo. - Throttle Servo Reversing:
This function reverses the rotation direction of the throttle servo. - Throttle End Point Adjustment (EPA):
This function is used to adjust the forward and brake side servo travel. Each direction can be adjusted independent of each other. Use this feature to set the throttle servo travel. - CH3 Function:
One other channel can be used besides the steering wheel and the throttle operation. Right and left operation of two actions can be done by using the servo. CH3 cannot operate EPA function and servo function linearly.
Futaba 3PR 2.4Ghz Radio With R203GF Receiver Tech Specs:
- Shipping Weight: 0.58kg / 1.27lbs
- Age Recommendation: 14+
- Channels: 3
- Radio Protocol: S-FHSS [Surface], FHSS
- Colour: Black
Key Info:
- Brand: Futaba
- Part No: FUT05003049-3
- Barcode: 4513886022647
- Receivers Included: 1
- Frequency: 2.4Ghz
- Channels: 3 Channel
- Format: Steerwheel
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
Questions & Answers
No, the R203GF is not waterproof
Third channel is for whatever you wish - lights, winch, etc. Yes - you could bind to a 2 channel compatible receiver
Yes, this will work with pretty much any servo or ESC.
ASK A QUESTION
For more in depth queries, please contact us.