GBP
€ Euro
$ USD
Hobao Hyper TT 2.0 Pro Truggy RTR - Silver (HB-TT2E-C60SV)
Brand: Hobao
Part No: HB-TT2E-C60SV
£275.89
RRP £309.99
Shadow Stock: Usually ships next day
Finance options available at checkout.
Description
The Hobao Hyper TT 2.0 Pro Truggy RTR in Silver (HB-TT2E-C60SV) blends a tough hard‑anodised aluminium chassis with a powerful brushless system and precise steering hardware for confident control on a wide range of surfaces. Supplied ready to run with a 2.4GHz FHSS radio, it features metal‑gear driveline components, big‑bore shocks and extensive adjustability.
Radio System
- 3‑channel 2.4GHz FHSS with dual‑rate steering and throttle
- Charge jack on transmitter for optional NiCd batteries
Steering Servo
- High‑output, ball‑bearing, digital design
- Metal gears
- 18kg‑cm torque
Brushless Power System
- 3900Kv 4‑pole motor, ø36mm can, 3mm shaft
- Hobbywing 60A waterproof ESC with single Deans plug
- Cooling fan and program card
Chassis & Bracing
- Lightweight, hard‑anodised CNC aluminium chassis, 3mm thick
- Centre top brace with wire pass‑through; single‑screw removal
- CNC aluminium laydown motor mount (fits motors below 38mm)
- Spur gear cover
Drivetrain & Differentials
- Single ø4mm hardened steel centre driveshaft (optional aluminium driveshaft H0P1-0072)
- Front CVA axles ø3.2mm hardened steel; rear dogbone axles ø3.2mm hardened steel
- Front, rear and centre metal bevel gear differentials with anti‑leakage housings
- Differential gears: pinion 10T (MOD 1) / ring 39T (MOD 1)
- Centre spur gear: 40T (MOD 1)
- Front diff filled with 5K silicone oil; centre 5K; rear 3K
- Motor gear: 13T (MOD 1); spur gear: 40T (MOD 1)
Suspension & Steering
- Aluminium 12mm big‑body shocks with 3.5mm shafts, adjustable rings and shock cap protectors; filled with 600 silicone oil
- Springs: front 0.86kg/cm (L=50mm, blue); rear 0.64kg/cm (L=65mm, blue)
- Shock towers: 3mm CNC aluminium (optional carbon fibre: front H0P1-0070, rear H0P1-0071)
- Front PBS; strengthened composite upper and lower arms (also fitting older TT10)
- Optional aluminium steering block set H0P1-0077; aluminium rear hub H0P1-0079
- Optional carbon fibre arm inserts H0P1-0068 and H0P1-0069
- Front and rear anti‑roll bars
- Front and rear mg alum arm holder with pill inserts #11367; adjustable toe and anti‑squat angles
- New steering crank set with CNC aluminium rack and hard spring; ball‑bearing servo saver
Wheels & Tyres
- Pin‑spoke tyres
- 5‑spoke white wheels, 12mm hex
- Diameter 62mm; width 51.2mm
Hardware & Adjustability
- Full set of ball bearings
- Adjustable caster and camber
Secure Payments
Secured by Stripe
Hobao Hyper TT 2.0 Pro Truggy RTR - Silver Manuals & Guides
How-To Guides & Articles
Specifications
HOBAO TT2.0 PRO TRUGGY TRUCK RTR WITH SILVER BODYSpecifications
Key Info:
Radio:
- 3-channel 2.4GHz FHSS with dual rate steering and throttle, charge jack on transmitter for optional NiCd batteries.
Servo:
- High output ball bearing.
- Metal gear.
- Digital.
- 18kg-cm torque.
Motor:
- 3900Kv brushless.
- 4 pole.
- Outer Diameter ø36mm.
- Shaft ø3mm.
ESC:
- Hobbywing 60A waterproof ESC with single Deans plug battery connectors.
- Cooling fan and program card.
Chassis:
- Lightweight.
- Hard anodised CNC aluminum.
- 3mm thick.
Centre Top Brace:
- Wire pass through.
- Easy to remove with a single screw.
Drive:
- Central: Single ø4mm Hardened steel centre driveshaft.
- Optional Aluminium driveshaft H0P1-0072.
- Front: CVA axles, ø3.2mm Hardened steel.
- Rear: Dogbone, axles, ø3.2mm Hardened steel
Differentials:
- Center diff is directly connected to rear diff.
- Front, Rear and Center Differential, Metal Bevel gear, Anti-leakage Differential housing.
- Pinion Gear: 10T (MOD 1)/ Ring Gear: 39T (MOD 1).
- Center Spur Gear: 40T (MOD 1).
- Front differential filled with 5K silicone oil.
- Center differential filled with 5K silicone oil.
- Rear differential filled with 3K silicone oil.
Shocks:
- Filled with 600 silicone oil.
- Aluminium 12mm Big Body.
- 3.5mm Shaft.
- Aluminium Adjustable Ring.
- Shock Cap Protector.
Spring:
- Front: 0.86kg/cm, L=50mm, Blue.
- Rear: 0.64kg/cm, L=65mm, Blue.
- Optional Front Spring H0P1-0073: 1.00 kg/cm, L=50mm, Grey.
- Optional Rear Spring H0P1-0074: 0.73kg/cm, L=65mm, Grey.
- Shock Tower: 3mm, CNC aluminium.
- Optional carbon fiber shock tower, Front tower H0P1-0070 & Rear tower H0P1-0071.
Suspension:
- Front PBS.
- Optional aluminium steering block set H0P1-0077: Alumumium rear hub H0P1-0079.
- New strengthened composite upper arms and lower arms.( Also Fitting for older versions of the TT10).
- Optional carbon fiber arm insert H0P1-0068 and H0P1-0069.
- Front & rear anti-roll bars.
- Front and rear mg alum arm holder with pill inserts #11367, adjustable toe angles and anti-squat angles.
Steering:
- New Steering Crank set with CNC aluminium rack and hard spring.
- Ball bearing equipped with servo saver.
Battery tray:
- Motor Gear: 13T (MOD 1).
- Spur Gear: 40T (MOD 1).
Motor Mount:
- CNC aluminium laydown motor mount.
- Fitting for motors with size below 38mm.
- Spur gear cover.
Tyres:
- Pin-spoke tyres.
Wheels:
- 5-Spoke wheels.
- White.
- 12mm Hex.
- Diameter 62mm.
- Width 51.2mm.
Ball Bearings:
- Full set included.
Caster:
- Adjustable.
Camber:
- Adjustable.
Key Info:
- Brand: Hobao
- Part No: HB-TT2E-C60SV
- Barcode: 4711256703282
- Scale: 1:10
- Build Level: Assembled (RTR)
- Power Source: Electric - Brushless
- Surface Type: Off Road
- Vehicle Type: Truggy
Delivery & Returns
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Customer Reviews
No specific product reviews yet, why not write one?Write a Review
All reviews are subject to moderation
Questions & Answers
No questions yet, why not ask one?
Ask a Question
Get early access to deals and new arrivals.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.
For more in depth queries, please contact us.
For more in depth queries, please contact us.
