Hobbywing EZRun MAX5 HV G2 ESC Combo With 56118Sd 800Kv G2 Motor
Brand: Hobbywing
Part No: HW38010602
In Stock: Usually ships same day
The Hobbywing EZRun MAX5 HV G2 ESC Combo with 56118SD 800KV G2 motor (HW38010602) delivers high-voltage power and robust control for large-scale RC applications. Designed for demanding 1/5 projects, this waterproof and dustproof system pairs a heavy-duty MAX5 HV G2 ESC with a 56mm-diameter, 800KV brushless motor for smooth, efficient performance on 8–12S LiPo.
Key Features
- Excellent waterproof and dustproof performance to handle harsh conditions and varied climates.
- Smart freewheeling technology for higher drive efficiency, lower operating temperature and improved stability.
- Built-in switch-mode BEC with an adjustable 6–8.4V output to support high-voltage servos.
- Multiple protections: low-voltage cutoff, ESC overheat, throttle signal loss, over-current and capacitor overheat.
- Independent programming port for convenient setup without removing the throttle lead from the receiver.
Combo (Motor) Specifications
- KV: 800KV
- LiPo: 8–12S
- No-load current: 6.9A
- Motor size: Diameter 56mm, Length 119.2mm
- Shaft: 8mm diameter, 30mm length
- Bearing sizes: Front D22×D8×T7; Rear D19×D8×T6
- Poles: 4
- Weight: 1277g
- Suggested compatibility: 1/5 buggy, truck platforms
ESC (MAX5 HV G2) Specifications
- Continuous / Peak current: 250A / 1600A
- Motor support: Sensored and sensorless brushless
- Suggested compatibility: 1/5 buggy, truck platforms
- Motor limit: With 8S LiPo, KV < 1200; with 12S LiPo, KV < 800 (56118 size motor)
- LiPo cells: 6–12S
- BEC output: 6V / 7.4V / 8.4V adjustable, 8A continuous (switch‑mode)
- Cooling fan supply: Stable 6V, 7.4V or 8.4V from the built-in BEC
- Dimensions / Weight: 94.5(L) × 59.4(W) × 50.9(H) mm / 428.5g (incl. input wires)
- Programming: Independent programming port
Note
The KV ranges listed are recommended for typical applications (considering motor rpm and overall vehicle load) and do not indicate the ESC’s absolute maximum rpm capability.
Secured by Stripe
- Excellent waterproof and dustproof performance, it is easy to deal with various climatic conditions and harsh environment.
- Smart freewheeling technology makes the esc have higher driving efficiency and lower operating temperature, and the stability and reliability of the esc are further improved.
- Built-in powerful switch mode BEC, continuous current up to 5A, instant up to 10A, and support 6V-8.4V adjustable, easy to drive various powerful and high-voltage steering servo.
- Multiple protection functions: battery low voltage protection, esc overheat protection, throttle signal loss protection, current protection, capacitor overheat protection.
- It has an independent programming port. When connecting the program card, it is not necessary to pull the throttle cable out of the receiver, which is more convenient to use
KV: 800KV
Lipo's: 8-12S
No-load Current (A): 6.9A
Diameter / Length: φ=56mm (2.20") L=119.2mm (4.69")
Shaft Diameter / Length: φ=8mm (0.31") L=30mm (1.18")
Bearing size (mm): Front: D22*D8*T7 Rear: D19*D8*T6
Pole: 4
Weight: 1277g
Applications: 1/5 Buggy, Truck
Cont. / Peak Current: 250A / 1600A
Motor Type: Sensored / Sensorless Brushless Motor
Application: 1/5th Buggy, Truck
Motor Limit (Note*): With 8S LiPo: KV < 1200 With 12S Lipo: KV <800 56118 size motor
LiPo Cells: 6-12S LiPo
BEC Output: 6V/7.4V8.4V adjustable, continous current 8A (switch-mode)
Cooling Fan: A stable 6V or 7.4V or 8.4V from the built-in BEC
Size / Weight: 94.5(L) x 59.4(W) x 50.9(H)mm / 428.5g (Included input wires)
Programming Port: Independent programming port
Please Note: The range of KV value here is the recommended value under the standard application (combined with the rpm supported by the motor and the actual load of the whole vehicle), and does not represent the maximum rpm supported by esc.
Key Info:
- Brand: Hobbywing
- Part No: HW38010602
- Barcode: 6938994407618
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
Questions & Answers
That will fit if you use this mount HOP-0150
Yes that would be a good combo.
Yes others are using this system , we have not fitted one so it may require after market motor mounts but it has been done many times so there are some good videos showing this on youtube.
No this will not fit without modification to the front steering brace.
ASK A QUESTION
For more in depth queries, please contact us.





