GBP
€ Euro
$ USD
HPI Vorza Nitro Truggy
Brand: HPI
Part No: HPI-160180
In Stock: Usually ships same day
Get yourself up and running quickly with everything youll need for your new pullstart equipped model
HPI-101939
OP1004
FAST692
Saves £12.85 over RRP
A step up from our basic nitro starter package, this bundle will give you that competitive edge with your new model with a rechargeable battery pack and a larger bottle of fuel.
HPI-101939
OP1006
PX2114
SCH-EP1600H
FAST692
Saves £24.30 over RRP
The HPI Vorza Nitro Truggy (HPI-160180) brings the 2022-spec Vorza platform’s race-proven pedigree to 1/8 scale off-road. Factory-assembled and pre-painted, it combines point-and-shoot steering with a super-adjustable suspension, giving confident control across loose dirt, hardpack, real or artificial grass, brick and more. A tough shaft drivetrain and spiral-cut bevel gears deliver strength and efficiency lap after lap.
More than just a basher, the Vorza is engineered for the track. From counter-rotating shock mount screws and an adjustable wheelbase to front and rear sway bars and aluminium shock towers, its layout is built to go racing. Between runs, setup changes are quick thanks to hex head hardware, easy access to shock positions and differential greases, plus an easy-to-remove radio box for straightforward cleaning.
Key Features
- Factory-assembled and pre-painted 4WD 1/8 scale car
- Pre-painted body with distinctive speed graphics
- Pre-mounted all-terrain tyres
- High-torque, water-resistant servo
- Full-time 4WD for excellent control
- Efficient and tough shaft drivetrain
- Spiral-cut bevel gears for a strong, efficient drivetrain
- 16mm big-bore, oil-filled shocks for confident control
- Suspension based on World Championship pedigree
- Aluminium shock towers, front and rear
- Front and rear sway bars for excellent handling
- Thick steel turnbuckle links for custom-tuned handling
- High ground clearance for most surfaces
- Nylon stone and dirt guards to keep debris out of the chassis
- Dual bellcrank steering with cam-type servo saver
- All hex head hardware
- Full set of rubber-sealed ball bearings
- 2.4GHz radio set with waterproof receiver
- Enclosed receiver box
Nitro Version Features
- High-revving Nitro Star F4.6 V2 engine
- Tuned muffler for maximum torque and high speeds
- Large fuel tank with internal baffles
- Grease-filled differentials
Dimensions (mm)
- Length: 580
- Width: 408
- Height: 200
- Wheelbase: 375
Required For Operation
- Nitromethane fuel
- Glow igniter
- Fuel bottle
- 4x AA batteries for transmitter
- RX battery for car
- RX battery charger
Secured by Stripe
The 2022 spec Vorza line-up features the same Worlds-conquering design that has beaten the best of the best on the racing track! A full suite of top-level race car features makes sure that you can attack the racing line straight out of the box!
Packed with racing features
Point-and-shoot steering? Check! Super-adjustable racing suspension with big-bore shocks? Check! Multitudes of maximum durability features? Check! The Vorza is ready for you to conquer all kinds of racing surfaces, from loose and hard dirt to real or artificial grass, brick and everything in between!
In between runs, adjustments are easy – from shock positions to diff greases. Every screw and bolt is a tough hex head design for quick and easy adjustments. And when you’re finished for the day, the radio box is easy to remove for cleanup. The Vorza is ready for you to take on the world!
More than just a basher
HPI fans know that the Vorza goes beyond bashing. Of course you can take it to your local bashing spot and just try to get big air or top speed runs out of it – but the Vorza is a race car, there’s no denying! From its counter-rotating shock mount screws to its adjustable wheelbase, it is ready for racing action on the track - but don’t let that stop you from showing those bashers a thing or two!
HPI Vorza Truggy Features:
- Factory-assembled & pre-painted 4WD 1/8 scale Car
- Pre-painted body with awesome speed graphics
- Pre-mounted all-terrain tires
- High torque water-resistant servo
- Full-time 4WD for excellent control
- Efficient and tough shaft drivetrain
- Spiral-cut bevel gears for the best balance of strength and efficiency
- 16mm Big Bore oil-filled for confident control
- Suspension based on World Championship pedigree
- Aluminum shock towers front and rear
- Front and rear sway bars for excellent handling
- Thick steel turnbuckle links allow you to custom-tune handling
- High ground clearance for driving on most surfaces
- Nylon stone and dirt guards keep rocks out of the chassis
- Dual bellcrank steering
- Cam type servo saver
- All hex head hardware
- Full set of rubber-sealed ball bearings
- 2.4GHz Radio Set with waterproof receiver
- Enclosed receiver box
Nitro Vorza Versions Feature:
- High-revving Nitro Star F4.6 V2 engine
- Tuned muffler for maximum torque and high speeds
- Large fuel tank with internal baffles
- Grease-filled differentials
HPI Vorza Truggy Nitro Dimensions
- Length (mm) 580
- Width (mm) 408
- Height (mm) 200
- Wheelbase (mm) 375
HPI Vorza Truggy Nitro Requires for operation:
- Nitromethane fuel
- Glow igniter
- Fuel bottle
- 4x AA batteries for transmitter
- RX battery for car
- RX battery charger
Key Info:
- Brand: HPI
- Part No: HPI-160180
- Barcode: 5050864026956
- Scale: 1:8
- Build Level: Assembled (RTR)
- Power Source: Nitro
- Surface Type: Off Road
- Vehicle Type: Truggy
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
nitro is the best
It was my first nitro. I enjoyed the car, nothing broke except for pressure spring, pullstart and throttle servo. I've had the car for over 2.5 months and i can definitely say that It's an awesome truggy !!!!!!!!
WRITE A REVIEW
Questions & Answers
That is a pullstart car so you just need the combo with fuel and the starter pack listed ;)
ASK A QUESTION
For more in depth queries, please contact us.
Plazma 6.0V 1600mAh NiMH Receiver Battery Pack
Big Bore Shock Spring (Blue, 76mm, 63Gf, 2 Pcs)
HPI Pro Series Multi Socket Wrench (8, 10 + 17mm)
Wing Mount Set D8
#HBC8021 - Differential Pads
Suspension Shaft (Outer/Threaded)
Vorza Truggy Nitro VB-2 Decal Sheet
Washer M3x8mm
Sway Bar (2.8mm) D8
Button Head Screw M3x10mm (2mm Hex Socket/6Pcs)
Set Screw M3X5mm (10Pcs) 1.5mm Hex Socket
#HBC8045 - Racing Clutch Springs (3pcs)
Front Shock Tower
Front Suspension Block (Fr) D8
#HBC8064 - Front Wheel Axle Shaft