GBP
Customers Also Buy
Popular with customers who buy products like the HSD Jets 1.3m Furious 200 Red (PNP 4S)
Description
The HSD Jets 1.3m Furious 200 Red (PNP 4S), part number HSDA04010100, is a plug-and-play electric pylon racer built from EPO foam with a 1300mm wingspan. It arrives pre-painted in red, with the brushless outrunner motor, brushless ESC and four metal gear servos already installed, so only a radio system and battery are needed to finish it.
The airframe is moulded in EPO foam, which the manufacturer describes as tough and impact resistant. An 8mm x 8mm carbon fibre square rod is built into the fuselage where the main wing connects, adding rigidity for high-speed rolls and inverted flight. The wing panels plug in with root-mounted connector blocks, so there are no servo wires to connect, and they are secured with four screws. The tail locks into place, which keeps assembly simple. Skid pads in ABS plastic protect the wings, belly and tail, and cowl air intakes let air flow through the fuselage to help cool the motor and ESC.
The flat-wing airfoil is designed for low resistance and streamlined flight. On 4S power the Furious 200 is rated at over 100mph. It is listed for intermediate pilots aged 14 and over and should be flown at a designated R/C model flying facility.
What's Included
- Pre-painted EPO fuselage
- Pre-painted EPO wing set
- Pre-painted EPO tailplane set
- Pre-installed brushless outrunner motor
- 4 pre-installed metal gear servos
- Pre-installed brushless ESC
- Instruction manual
Required to Complete
- 6-channel transmitter and receiver combo
- 4S 14.8V 2200-3200mAh LiPo battery
- 4S compatible LiPo charger
Specifications
- Wingspan: 1,300 mm
- Length: 884 mm
- Wing area: 19 dm²
- Approx. flying weight: 1 kg
- Material: EPO
Secured by Stripe
HSD Jets 1.3m Furious 200 Red (PNP 4S) Manuals & Guides
Manuals & Guides
Specifications
HSD Furious 200 – 100+ MPH High Performance Pylon Racer
High Speed Performance
A dedicated racer, with up to 140 MPH top speed straight out of the box!
EPO Foam Construction
EPO foam has strong material toughness and shear resistance, with high strength. It's all about anti-compression, ruggedness, durability, and toughness. HSD has perfected their EPO foam blend, offering excellent impact resistance through the development of various models and designs.
Exquisite Workmanship
Beautiful exterior appearance with quality build and professionally engineered design.
Carbon Fibre Reinforced
A carbon fibre-reinforced airframe is essential when dealing with high-speed manoeuvres. Since the fuselage and main wing connection points are critical, the Furious 200 airframe includes a built-in 8mm x 8mm carbon fibre square strengthening rod. This enhances the overall strength of the airframe by up to three times, allowing it to easily perform high-speed rolls, inverted flight, and other advanced moves.
Quick Assembly
The Furious 200 is designed for quick and simple assembly. The main wings install with four screws, and the tail is assembled using a locking mechanism. The kit can be assembled in under 10 minutes, depending on the pilot's skill level.
An Efficient Airfoil
The Furious 200 uses a high-performance, low-resistance flat-wing airfoil that gives it streamlined and efficient flight characteristics.
Damage Prevention
This model is designed with a main wing and belly anti-wear skid pad. The tail also uses an anti-wear skid pad. These pads are made from ABS high-strength, wear-resistant engineering plastics, providing all-round protection against wear.
Air Cooled
The Furious 200 is designed with cowl air intakes that allow airflow through the fuselage. This provides ventilation and cooling for the electronic equipment, helping to keep the motor and ESC cool and preventing failures caused by overheating.
HSD Jets 1.3m Furious 200 Red (PNP 4S) Key Features:
- Crisp and precise pylon racer flying characteristics.
- Light and resilient EPO airframe.
- Striking high-vis colour scheme.
- Minimal assembly time.
- Grab 'n' go 1300mm wingspan.
- Over 100mph top speed.
- Rigid airframe with 8mm carbon fibre main spar.
- Wire-free plug-in wing panels with root mounted connector blocks.
- 4S power system.
- Wingtip and fuselage scuff guards.
What's in the Box:
- 1x Pre-painted and finished EPO fuselage moulding.
- 1x Pre-painted and finished EPO wing set.
- 1x Pre-painted and finished EPO tailplane set.
- 1x Pre-installed brushless outrunner.
- 4x Pre-installed metal gear servos.
- 1x Pre-installed brushless ESC.
- 1x Comprehensive instruction manual.
Needed to Complete:
- 1x 6-channel transmitter and receiver combo.
- 1x 4S 14.8V 2200 – 3200mAh LiPo.
- 1x 4S compatible LiPo charger.
- 1x Suitable LiPo battery charger.
HSD Jets 1.3m Furious 200 Red (PNP 4S) Tech Specs:
- Approx. Flying Weight: 1kg / 2.2lbs
- Shipping Weight: 4.00kg / 8.82lbs
- Product Length: 884mm / 34.8in
- Product Wingspan: 1,300mm / 50.9in
- Product Wing Area: 19dm2 / 289.85in2
- Completion Level: PNP
- Experience Level: Intermediate
- Assembly Time: 60minmin
- Age Recommendation: 14+
- Recommended Usage Environment: Designated R/C model flying facility
- Colour: Array
- Material: EPO
- Power Source: Electric
Key Info:
- Brand: HSD Jets
- Part No: HSDA04010100
- Barcode: 5051121273960
- Power: Electric
- Assembly Level: PNP (Plug n Play) / RR
- Flying Style: Sport
Delivery & Returns
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Customer Reviews
My first passion is always Helicopters, and the occasional plane (usually a "beefed up" Acrowot) but I don't always have good luck with them as have tried a few hobby king favs and always regretted it.... i saw this one and the fact a lot of people really rate it...had a few drinks....then brought it... I'm really glad i did as it is a excellent plane. it flew great from the first flight with very little trimming and handles the wind really well which it needs to this time of year... Excellent bird !!!
Questions & Answers
For more in depth queries, please contact us.