J Perkins JPS-3 E2K Pylon Racer ARTF JPDAA1002
Brand: J Perkins
Part No: JPDAA1002
Usually ships next day
Save with a Combo Package
Our recommended kit, bundled at a combined priceCustomers Also Buy
Popular with customers who buy products like the JP JPS-3 Racer (E2K Pylon) ARTF 1016mm (40in)
Description
The J Perkins JP JPS-3 Racer (E2K Pylon) ARTF 1016mm (40in), part number JPDAA1002, is an ARTF electric pylon racing aircraft with pre-built and covered components. Designed for intermediate to advanced R/C pilots, this model is based on the E2K pylon racing format and is approved for E2K racing. Its laser-cut balsa and ply construction is supplied with an applied Oracover scheme, allowing the main airframe components to be assembled and prepared for equipment installation.
The JPS-3 design was created by pylon race champion Paul Bardoe, who flew it to victory at the 2022 British National E2K Pylon Race Championships. The airframe is intended for precise handling through high-g turns and smooth aerobatics, with a layout that supports hand launching. Assembly is stated to take approximately 300 minutes, making this an ARTF model rather than a fully assembled aircraft.
For the power system, the suggested set-up uses a 1500KV outrunner, an 80A electronic speed controller and a 4S 2200mAh LiPo battery. The listed equipment also includes three servos, a four-channel minimum transmitter and receiver combination, and an APC 8x8 inch i.c. propeller. These items are not included with the airframe and are required to complete the model.
What's Included
- Pre-built and covered fuselage
- Pre-built and covered two-piece wing
- Pre-built and covered tailplane
- Pre-built and covered fin
- Hardware pack
- Instruction manual
Required to Complete
- Four-channel minimum transmitter and receiver combination
- Radient 3536 1500KV outrunner
- ZTW Beatles G2 80A ESC
- 4S 2200mAh 50C LiPo battery
- Three Radient MS125MG servos
- APC 8x8 inch i.c. propeller
Specifications
- Wingspan: 1,016mm (40in)
- Length: 737mm (29in)
- Shipping weight: 1.04kg (2.29lb)
Secured by Stripe
JP JPS-3 Racer (E2K Pylon) ARTF 1016mm (40in) Manuals & Guides
Specifications
Fast, precise, snappy, rock-solid in high-g turns and beautifully smooth through graceful aerobatics, nothing quite beats the arrow-like flying qualities of the JPS-3 E2K pylon racer. That s a recognised fact, for at the 2022 British National E2K Pylon Race Champs, JPS-3 designer and multiple pylon race champion, Paul Bardoe, flew this very design to victory.
Perfect for intermediate to advanced R/C pilots, this is model flying in one of its simplest yet most exciting and satisfying forms. Assemble in a matter of minutes, kit it out with a 1500KV outrunner, APC 8x8 i.c. prop, 80A ESC and 4S 2200mAh LiPo and you ll just about be ready to punch holes in the sky.
JP JPS-3 Racer (E2K Pylon) ARTF 1016mm (40in) Key Features:
- Fast, precise, snappy, rock-solid in high-g turns and beautifully smooth through graceful aerobatics, nothing quite beats the arrow-like flying qualities of the JPS-3 E2K pylon racer. That s a recognised fact, for at the 2022 British National E2K Pylon Race Champs, JPS-3 designer and multiple pylon race champion, Paul Bardoe, flew this very design to victory.
Perfect for intermediate to advanced R/C pilots, this is model flying in one of its simplest yet most exciting and satisfying forms. Assemble in a matter of minutes, kit it out with a 1500KV outrunner, APC 8x8 i.c. prop, 80A ESC and 4S 2200mAh LiPo and you ll just about be ready to punch holes in the sky. - E2K race approved.
- Laser-cut balsa and ply.
- Pre-applied Oracover scheme.
- Quality hardware throughout.
- Suits 1500KV 4S electric set-ups.
- Pre-built and covered airframe components.
- Locked-in flying characteristics.
- Easy to hand-launch.
- Smooth, fast and bags of fun.
What's in the Box:
- 1x Pre-built and covered fuselage.
- 1x Pre-built and covered 2-piece wing.
- 1x Pre-built and covered tailplane.
- 1x Pre-built and covered fin.
- 1x Quality hardware pack.
- 1x Comprehensive instruction manual.
Needed to Complete:
- 1x 4-ch (minimum) Tx and Rx combo.
- 1x Radient 3536 1500KV outrunner.
- 1x ZTW Beatles G2 80A ESC.
- 1x 4S 2200mAh 50C LiPo.
- 3x Radient MS125MG servos.
- 1x APC 8x8" i.c. propeller.
JP JPS-3 Racer (E2K Pylon) ARTF 1016mm (40in) Tech Specs:
- Shipping Weight: 1.04kg / 2.29lbs
- Product Length: 737mm / 29in
- Product Wingspan: 1,016mm / 40in
- Completion Level: ARTF
- Experience Level: Intermediate / Advanced
- Assembly Time: 300min
- Recommended Usage Environment: Designated outdoor model flying facility
- Colour: Red / White / Blue
- Material: Balsa / ply
Key Info:
- Brand: J Perkins
- Part No: JPDAA1002
- Barcode: 5051121268362
- Assembly Level: ARTF (Almost RTF)
- Power: Electric
- Flying Style: Sport
Delivery & Returns
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Customer Reviews
No specific product reviews yet, why not write one?Questions & Answers
For more in depth queries, please contact us.











































