RC4WD 1:14 Sledge Hammer Heavy Haul 6x6 RTR Truck RC4WD

The RC4WD 1:14 Sledge Hammer Heavy Haul 6x6 RTR Truck (part number VV-JD00053) is a premium, ready-to-run scale lorry built for demanding haulage and authentic realism. A full-metal 2-speed planetary transmission, remote-lockable differentials and billet aluminium drivetrain components pair with a super-scaled leaf spring suspension for confident control under load. The European-style hard plastic cab arrives painted with detailed touches, while the chassis is professionally pre-assembled and supplied with a basic 4-channel 2.4GHz radio. Recommended payload is 10kg.

Designed for experienced R/C users, this heavy-duty 6x6 blends robust engineering with scale features such as light buckets ready for LEDs and realistic hardware throughout. Power it with a 3S LiPo (XT60) and add AA cells for the transmitter to get rolling.

Key Features

• Hard plastic European-style front cab (painted)
• Full metal 2-speed transmission (planetary gears)
• Transfer case (billet aluminium)
• Moulded fuel tanks (stainless steel)
• Super scaled leaf spring suspension setup
• Scale rims (billet aluminium)
• Remote lockable front and rear axles (locking differentials)
• Full metal front and rear axle housing
• Steel scale drive shaft
• Realistic front cab latch
• Rear light guards
• Scale light buckets (fits 3–5mm LED)
• Scale wheels and tyres
• Brushed motor
• Length: 734mm (28.8in) | Width: 230mm (9.05in) | Height: 273mm (10.7in)
• Weight: 6.9kg (15.2lbs)
• Axle gear ratio: 2.6:1
• First gear 1:64, second gear 1:16 (transmission)
• Maximum load: 10kg (22lbs); Load total mass: 17kg (37lbs)
• Basic 4-channel 2.4GHz radio included
• Professionally pre-assembled
• Manufactured by JDCustoms; 30 days limited warranty

What’s Included

• 1/14 Sledge Hammer Heavy Haul 6x6 RTR Truck

Required To Complete

• 5200mAh 11.1V 3S 25C LiPo battery pack with XT60 plug (approx. 142 x 45 x 40mm)
• 4x AA batteries for the radio (Z-S1718)

Optional Parts

• Steel Side Step for Overland Truck (VVV-S0235)

Instruction Manual

Instruction manual available to download.

Notes

• Switch on the transmitter before powering the ESC
• ESC supports XT60 connector and does not have LiPo cut-off
• Check all hardware; use quality hex drivers and apply threadlock on metal-to-metal screws
• Use threadlock sparingly and do not overtighten screws
• Do not use more than a 3S (11.1V) battery
• Intended for experienced R/C users
• Only the right side of the truck has a blind mirror with downward view