GBP
€ Euro
$ USD
Roto Start System - For Hobao Hyper 21/28 Engines
Brand: Fastrax
Part No: FT02623H
In Stock: Usually ships same day
Everything you need to get your shiny new electric model out on the road!
VZ0010
ORI30198DNS
Saves £3.84 over RRP
The Fastrax Roto Start System FT02623H streamlines nitro engine starting with a powerful 550 motor and a torque-slip backplate. Supplied with a Hyper 21 plate, it uses a 6mm shaft with a hexball tip to engage the backplate receptacle for confident, consistent starts.
Highlights
- Powerful 550 motor for effortless engine cranking
- Torque-slip backplate designed to help prevent damage if the engine locks
- Uses a 6mm shaft with hexball tip for positive engagement
- Includes Hyper 21 plate for straightforward installation
Usage Guidance
- Start the engine in short, sharp bursts
- Do not operate continuously for more than around 15 seconds at a time to avoid heat build-up and potential gear damage
Suggested Compatibility
- Suggested compatibility: HoBao Hyper 21/28 engines
- Not compatible with the new HoBao Cops design of pull-start engines
Secured by Stripe
Fastrax Roto Start (with Hyper 21 Plate)
Start your nitro R/C engine effortlessly using this new Roto Start with powerful 550 motor. Insert the 6mm shaft with hexball tip into the new Torque-Slip design backplate receptacle to start your engine. The torque slip back platefeatures a specially design 'slip' unit to avoid possible damage should the engine lock up.
Please Note: This item is not compatible with the new HoBao Cops design of pull-start engines.
Tech Note: Starting any engine should be done in short, sharp bursts. These are NOT designed to be "held on" for more than 15+ seconds at a time - doing so will cause heat build up and gear damage.
Key Info:
- Brand: Fastrax
- Part No: FT02623H
- Barcode: 5055323911682
Additional Categories:
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
I bought it for my hobao hyper 7 tq sport. Very good product and exactly as described.
Great product from Fastrax once again, makes starting my Hyper .21 a breeze! Would highly recommend.
Very good quality +++
Prodotto di qualità,molto professionale!!! Eccellente!!!
WRITE A REVIEW
Questions & Answers
Yes you do.
No we do not they only come with the backplate.
If it is not the cops pullstart version this should fit fine.
It would be best to stick to Nimh for a starter box as you will not know when the lipo is nearly dead.
No that will not fit , there is not a roto start for that engine and they suggest using a starter box.
Only if it is not a COPS engine (which says cops on the pullstart and the pullstart has a green handle)
This will not fit a Hobao COPS engine.
It is not designed for that engine so we cannot recommend it.
No that is for hobao engines only , we do not know of one that will fit the dynamite engine.
This is not compatable with the new Hyper engines with the cops pull start, if your car has a green handel for the pull start then it will not work.
This will take a standard 7.2v NiMh battery, something like this HPI-160152
Yes this will fit for you.
No it won't you need one for the Force engines. Please call the store and one of the team will advise you.
Not that I know to sorry
If it's the later COPS version (green pullstart handle) then I'm afraid these won't fit sorry
Doubtful sorry
Yes provided it does not have the COPS system
Spare backplates are FT02624-11
No it won't fit that
No this does not include battery or charger but we do list them in our combo pack
No, sorry
Yes we ship worldwide, to see shipping costs simply add the item to your basket and choose your country from the drop down list on the "view cart" page.
No will not work with a cops, only a starter box for this engine if you wish to move away from the pull start
Not if it is a cops engine, which all have been since late 2016
Yes, this will work on your Hyper 7.
Thanks for the info...!
I don't believe so, only the Hobao Hyper 21 or 28
No, it's designed solely for Hyper 21/28 engines.
No. You can use any 7.2v NiMh stick pack such as those shown in our combo package - VZ0014 and charger HC-C606014
No, this will only fit Hobao.
There is a version FT02623F which is listed for SH engines, but please be aware there are many different variants - so we couldn't advise if it would fit your application.
It will bolt on as the bolt pattern is the same, but will not work on a COPS engine sorry.
Yes, if you have the Hyper 21 or 28 engine this should fit.
No, this will not fit the Hobao .30 with COPS starter system.
Yes, that will fit the Hyper SS.
Yes, the backplate is included
This won't fit thunder tiger engines sorry
The backplate is not sold separately, sorry.
I'm afraid we don't sell Hong Nor, so can't be 100% certain, but I'd assume it's a no as the Hyper .21 and .28 are quite a specific fitment.
You mention Force, if your engine uses a Force .28 pullstart, you may find the HPI F series rotostart HPI-87130 may fit.
Yes, this should fit your Hyper 7 TQ 21.
I'm afraid not, sorry. It will only work on the Hobao/Mac Hyper 21/28 engines.
ASK A QUESTION
For more in depth queries, please contact us.