GBP
€ Euro
$ USD
SKY RC ARES PRO V4 Brushless Motor SPEC 13.5T
Brand: SkyRC
Part No: SCH-SK-400034-02
£46.79
RRP £51.99
In Stock: Usually ships same day
The SkyRC Ares Pro V4 Brushless Motor SPEC 13.5T (part number SCH-SK-400034-02) is a ROAR-approved, 1/10 sensored motor engineered for competitive control and efficiency. Its all-new design focuses on cooling, durability and ultra-smooth throttle response to keep lap times consistent across demanding race conditions.
Key Features
- ROAR-approved performance for regulated competition.
- CNC aluminium heatsink can with rear venting to improve airflow over the Hall sensor and stabilise performance.
- Low-resistance solder tabs to minimise power loss and maximise current to the rotor.
- Advanced sensor system for precise low-speed control and cogging-free throttle response.
- Global-grade bearings and a precision shaft for smooth, accurate operation over extended use.
- High-purity 220°C copper windings for efficient power delivery with reduced heat build-up.
- Precision-balanced rotor with 200°C heat-resistant, explosion-proof structure for consistent power and higher RPM.
- 200°C high-temperature neodymium magnets and a high-efficiency iron core for strong torque and stable magnetism.
- Redundant dual sensor ports in different orientations for simplified wiring and built-in backup.
- Modular, fully rebuildable construction for straightforward cleaning, servicing and component swaps.
- SPEC 13.5T wind; multiple turn options are available within the Ares Pro V4 range.
Adjustable Timing Options
- Low timing (0–20°): Later power delivery for smooth output, stable torque and linear starts—ideal for continuous corners and reducing wheel spin.
- Mid timing (20–40°): Balances instant punch with smooth, sustained acceleration—suited to mixed circuits with straights and curves, including drift layouts.
- High timing (40–60°): Earlier power delivery for rapid RPM climbs and higher top speed on flat-out sections.
Size and Weight
- Size: 35.8 x 35.8 x 52 mm
- Weight: 148 g ±5 g
Working and Storage
- Operating temperature: -10°C to 80°C
- Operating humidity: 20%–80% (non-condensing)
- Storage temperature: 0°C to 50°C
- Storage humidity: 30%–60% (non-condensing)
Before You Run
- Before use, confirm your ESC’s continuous/peak current, supported cell count and sensor port type for suggested compatibility with the motor.
Secure Payments
Secured by Stripe
Introducing the SKY RC Ares V4 1/10 Sensored Brushless Motor, with all new design.
ROAR Approved Roaring Ahead
On the track or in every turn, the ROAR-approved ARES PRO 4 delivers uncompromising, professional-grade power.
ROAR isn’t just about compliance—it’s a mark of excellence.
Race with confidence. Race with ARES PRO 4.
Competition-Optimized Design
Every Detail Tuned to Win. Engineered to Excel.
Low-Resistance Solder Tabs
High-quality tabs minimize power loss, ensuring maximum current flows straight to the rotor.
Stay Cool: CNC Aluminum Heatsink Case with Rear Venting
The precision-machined aluminum case dissipates heat efficiently, while a large rear vent boosts airflow over the Hall sensor for stable, reliable performance.
Global-Grade Bearings & Precision Shaft for Ultra-Smooth Control
Top-tier international brand bearings paired with a high-precision shaft ensure buttery-smooth, accurate operation—race after race.
High-Purity, High-Temp Copper Windings
220°C-rated, high-purity copper windings ensure efficient, low-heat power delivery for stronger punch and higher top speed.
Precision-Balanced, Heat-Resistant Rotor
Meticulously balanced for ultra-smooth rotation and minimal vibration, the rotor is crafted with a 200°C heat-resistant, explosion-proof structure—delivering consistent power, higher RPMs, and lasting durability.
200°C High-Temp Neodymium Magnets
200°C heat-resistant neodymium magnets and a high-efficiency iron core deliver strong torque, stable magnetism, and consistent performance under pressure.
Advanced Sensor
No Hesitation. Just Precision.
ARES PRO 4 features advanced sensor technology for ultra-smooth throttle response and precise low-speed control—crucial for technical tracks and tight corners. By eliminating cogging, or hesitation at low RPMs, it delivers seamless, immediate power exactly when you need it.
Adjustable Timing.
Any Track.
Adjustable timing is the core of brushless precision, enabling power delivery to adapt seamlessly to any track condition.
Low Timing (0-20deg)
Later power delivery creates smooth output, stable torque, and linear starts.
Ideal for precise control through continuous corners, preventing sudden wheel spin.
Mid Timing (20-40deg)
Balances instant punch with smooth sustained acceleration.
Perfect for mixed circuits with straights and curves, such as drift tracks
High Timing (40-60deg)
Earlier power delivery drives rapid RPM climbs and explosive top speed.
Best for flat-out straights, achieving higher RPM under the same voltage.
Redundant Dual Sensor Ports.
Zero Hassle.
Placed in different orientations, the dual sensor ports simplify wiring and offer built-in redundancy. If one fails, the other keeps you running—seamlessly and reliably.
Plug in. Power on. No setup—just pure performance.
*Before use, please confirm your ESC’s continuous/peak current, supported cell count, and sensor port type to ensure compatibility with the motor specifications.
Modular by Design.
Built to Stay New.
ARES PRO 4 features a fully rebuildable, modular design—allowing easy disassembly of the housing, stator, windings, and bearings with standard RC tools.
Clean, service, and swap components to keep performance sharp and consistent, race after race.
Always fresh. Always in control.
Multiple Turn Options.
Ready for Any Track.
Each turn rating gives your car its own distinct character.
Lower turns deliver explosive speed and powerful thrust.Higher turns offer smooth, consistent power for confident control, lap after lap.
Size and Weight
Size: 35.8x35.8x52mm
Weight: 148g±5g
Working and Storage
Operating temperature: -10°C-80°C
Operating humidity: 20%-80% (non-condensing)
Storage temperature: 0°C-50°C
Storage humidity: 30%-60% (non-condensing)
Key Info:
ROAR Approved Roaring Ahead
On the track or in every turn, the ROAR-approved ARES PRO 4 delivers uncompromising, professional-grade power.
ROAR isn’t just about compliance—it’s a mark of excellence.
Race with confidence. Race with ARES PRO 4.
Competition-Optimized Design
Every Detail Tuned to Win. Engineered to Excel.
Low-Resistance Solder Tabs
High-quality tabs minimize power loss, ensuring maximum current flows straight to the rotor.
Stay Cool: CNC Aluminum Heatsink Case with Rear Venting
The precision-machined aluminum case dissipates heat efficiently, while a large rear vent boosts airflow over the Hall sensor for stable, reliable performance.
Global-Grade Bearings & Precision Shaft for Ultra-Smooth Control
Top-tier international brand bearings paired with a high-precision shaft ensure buttery-smooth, accurate operation—race after race.
High-Purity, High-Temp Copper Windings
220°C-rated, high-purity copper windings ensure efficient, low-heat power delivery for stronger punch and higher top speed.
Precision-Balanced, Heat-Resistant Rotor
Meticulously balanced for ultra-smooth rotation and minimal vibration, the rotor is crafted with a 200°C heat-resistant, explosion-proof structure—delivering consistent power, higher RPMs, and lasting durability.
200°C High-Temp Neodymium Magnets
200°C heat-resistant neodymium magnets and a high-efficiency iron core deliver strong torque, stable magnetism, and consistent performance under pressure.
Advanced Sensor
No Hesitation. Just Precision.
ARES PRO 4 features advanced sensor technology for ultra-smooth throttle response and precise low-speed control—crucial for technical tracks and tight corners. By eliminating cogging, or hesitation at low RPMs, it delivers seamless, immediate power exactly when you need it.
Adjustable Timing.
Any Track.
Adjustable timing is the core of brushless precision, enabling power delivery to adapt seamlessly to any track condition.
Low Timing (0-20deg)
Later power delivery creates smooth output, stable torque, and linear starts.
Ideal for precise control through continuous corners, preventing sudden wheel spin.
Mid Timing (20-40deg)
Balances instant punch with smooth sustained acceleration.
Perfect for mixed circuits with straights and curves, such as drift tracks
High Timing (40-60deg)
Earlier power delivery drives rapid RPM climbs and explosive top speed.
Best for flat-out straights, achieving higher RPM under the same voltage.
Redundant Dual Sensor Ports.
Zero Hassle.
Placed in different orientations, the dual sensor ports simplify wiring and offer built-in redundancy. If one fails, the other keeps you running—seamlessly and reliably.
Plug in. Power on. No setup—just pure performance.
*Before use, please confirm your ESC’s continuous/peak current, supported cell count, and sensor port type to ensure compatibility with the motor specifications.
Modular by Design.
Built to Stay New.
ARES PRO 4 features a fully rebuildable, modular design—allowing easy disassembly of the housing, stator, windings, and bearings with standard RC tools.
Clean, service, and swap components to keep performance sharp and consistent, race after race.
Always fresh. Always in control.
Multiple Turn Options.
Ready for Any Track.
Each turn rating gives your car its own distinct character.
Lower turns deliver explosive speed and powerful thrust.Higher turns offer smooth, consistent power for confident control, lap after lap.
Size and Weight
Size: 35.8x35.8x52mm
Weight: 148g±5g
Working and Storage
Operating temperature: -10°C-80°C
Operating humidity: 20%-80% (non-condensing)
Storage temperature: 0°C-50°C
Storage humidity: 30%-60% (non-condensing)
Key Info:
- Brand: SkyRC
- Part No: SCH-SK-400034-02
- Barcode: 5051294208974
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
All reviews are subject to moderation
No questions yet, why not ask one?
ASK A QUESTION
Get early access to deals and new arrivals.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.
For more in depth queries, please contact us.
For more in depth queries, please contact us.