GBP
€ Euro
$ USD
Tamiya Grasshopper
Brand: Tamiya
Part No: HC-58346
In Stock: Usually ships same day
Add a radio system, steering servo, batteries and charger to your new model. Note, you may also wish to choose some bodyshell paint from our range.
ET1060
SCH-EP3000S
HD-1812MG
ORI30198DNS
Saves £30.38 over RRP
Add a better specification radio system, steering servo, higher capacity battery and fast charger to your new Tamiya model. Note, you may also wish to choose some bodyshell paint from our range.
HPI-101939
ET1060
VZ0025
ET0208
SAV-SW0231MG+
Saves £36.17 over RRP
The Tamiya Grasshopper (HC-58346) rekindles an icon from 1984, delivering simple assembly, easy control and the charm of a classic 2WD buggy. With its lightweight design and durable construction, this kit is great fun on both off-road and on-road surfaces, capturing the spirit of 80s single-seat dirt racers.
A tough plastic body screws to a bathtub resin monocoque chassis for a rigid, resilient structure. Independent swing axle front suspension and a rolling rigid rear axle use coil spring friction dampers to handle bumps and ruts. A sealed rear gearbox keeps out dirt and stones, protecting the differential for smooth running and predictable cornering. Straight-ribbed front tyres and paddle-style rears on 3-piece wheels provide confident grip on loose surfaces, while the half-body driver figure adds a nostalgic finishing touch.
Highlights
- Classic 2WD buggy kit with straightforward assembly and easy handling
- Durable plastic body on a bathtub resin monocoque chassis
- Sealed rear gearbox helps protect the diff and maintain smooth drive
- Independent swing axle front and rolling rigid rear suspension with friction dampers
- 380 type motor; chassis has suggested compatibility with a 540 type motor (sold separately)
- 3-piece assembly wheels with straight-ribbed front and paddle rear tyres
- Front and rear axles have suggested compatibility with ball bearings (sold separately)
Basic Specifications
- Length: 389mm, width: 223mm, height: 135mm, weight: 830g
- 380 type motor (chassis has suggested compatibility with 540 type motor – sold separately)
- Transmission type: Rear 2 wheel drive
- Independent swing axle front suspension; rolling rigid axle rear suspension; friction dampers
- Sealed rear gearbox to protect diff gear during off-road running
- 3-piece assembly wheels; straight ribbed racing front tyres; paddle rear tyres
- Front and rear axle suggested compatibility with ball bearings (sold separately)
Secured by Stripe
Let It All Begin With This One Buggy Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80 s, the Grasshopper first made its appearance in R/C stores in 1984. Boasting easy assembly and easy control, the lightweight Grasshopper proved an instant hit as the perfect entry level R/C kit. Also compatible with a whole range of option parts such as 540 motor and ball bearings, the Grasshopper was an entry level car that could keep up with the owners driving experience. Packed with all the fantastic features of the original kit, this fun 2WD buggy is a blast on both off-road and on-road tracks. Whether it was your first or will be your first, the Grasshopper guarantees to please.
Simple But Tough 2WD Chassis The perfect combination of simple assembly and tough exterior is what made the Grasshopper so special. Durable plastic body is fastened to bathtub resin monocoque chassis by screws, creating a solid frame that can absorb any type of rough handling. Off-road tracks can be tackled with ease thanks to coil spring dampers, and independent swing axle front and rigid axle rear suspension. Diff loaded sealed gearbox keeps out the dirt and stones for smooth driving and cornering. Paddle style rear tires and grooved front tires combine with 3-piece assembly type wheels for excellent grip performance on dirt tracks. Half-body driver figure adds that finishing touch to a fun off-road R/C car.
Basic Specifications
- Length: 389mm, width: 223mm, height: 135mm, weight: 830g
- 380 type motor (chassis compatible with 540 type motor - sold separately)
- Transmission Type: Rear 2 Wheel Drive
- Independent swing axle front suspension, rolling rigid axle rear suspension, friction dampers
- Sealed rear gearbox to protect diff gear during off-road running
- 3-piece assembly wheel, straight ribbed racing front tires, paddle rear tires
- Front and rear axle compatible with ball bearings (sold separately)
Key Info:
- Brand: Tamiya
- Part No: HC-58346
- Barcode: 4950344583461
- Scale: 1:10
- Vehicle Type: Buggy
- Power Source: Electric - Brushed
- Surface Type: Off Road
- Build Level: Unassembled (Kit)
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
Bought this as i remember how much fun a Grasshopper was to drive. Ive just taken it out for it's "christening" and it is brilliant on rough terrain. I would recommend this version to anyone starting out in RC Cars. The only gripe i have is that the switch on the ESC that it came with the car is small and does not have any way of screwing to the chassis. There are screw holes but on the side, but this does not help. So, i will have to either silicone it in place or make something to hold it in place.
WRITE A REVIEW
Questions & Answers
Yes it does.
This kit has a moulded white ABS bodyshell in the box, This can be painted using Tamiya TS paints or left white ofr a box art finish.
Yes that will be fine
Yes these come with full instructions.
You need radio gear (transmitter + receiver), servo, battery + charger to complete. We include these in our 'combo packs'
A decent set of screwdrivers and hex drivers would be useful, as well as a sharp craft knife and some side cutters and pliers.
No, these are pre cut white ABS so don't require painting.
ASK A QUESTION
For more in depth queries, please contact us.
Tamiya 3X15mm Screw
Tamiya 1150 Plastic Bearing (10)
Tamiya A Parts For Lunch Box
Tamiya 2X8mm Screw (10)
Tamiya Front Tire(2)For 58016
Tamiya 1150 5 x 11 x 4mm Rubber Sealed Bearings (2 Pcs)
Tamiya 2X10mm Shaft *10
Tamiya 3X10mm Tapping Screw *10
Tamiya 18T Pin Gear Set 58346
Tamiya R Parts For 58016
Tamiya Hornet Chassis
Tamiya M4 Nylon Lock Nut (4 Pack)
Tamiya Spring Mount
Tamiya Dif Gear Bag Hornet
Tamiya 5mm Adjuster *6