GBP
€ Euro
$ USD
XFly Twin Otter 1800mm - PNP
Brand: XFly
Part No: XF116P
In Stock: Usually ships same day
The XFly Twin Otter 1800mm - PNP (XF116P) is a true-to-scale model of the DeHavilland DHC-6, engineered for Short Takeoff and Landing (STOL) capability and everyday versatility. Supplied PNP and noted by the manufacturer as without TX/RX/BATT, it features a factory-installed twin power system, fixed tricycle landing gear and a detailed cockpit with clear windows for an authentic look in the air and on the ground.
Paired with a single 6S 5000–6000mAh LiPo, the twin 3541-KV550 motors, twin 40A ESCs and 3-blade propellers deliver a balanced combination of thrust and duration. The airframe supports aerobatic manoeuvres including loops, 4-point rolls and inverted flight, while a shock-absorbing metal nose gear and rigid main gear aid durability and smooth ground handling. Practical touches such as a two-piece wing, removable nose and stabs make assembly, storage and transport straightforward. A vibrant yellow/blue scheme and pre-installed LED lights enhance visibility from daytime through dusk, and the clear, glass-like windows with a capacious cockpit allow for FPV installation.
Features
- Retaining scale features of the full scale Twin Otter
- STOL (Short Takeoff and Landing) capabilities
- Cockpit with clear windows, control surfaces, fixed tricycle landing gears
- Factory-installed twin efficient power system
- Capable of aerobatic maneuvers including loops, 4-point rolls and inverted flight
- Shock-absorbing metal front landing gear and rigid main landing gears
- Two-piece wing, removable nose and stabs
- Clear glass-like windows and capacious cockpit allow for FPV installation
- Pre-installed LED lights for added visibility
- Vibrant yellow/blue colour scheme
Specifications
- Overall Length: 1457mm / 57.4in
- Flying Weight: 3700g
- Motor Size: 3541-KV550 ×2
- ESC: 40A ×2
- Servo: 13g servos ×2
- Channels: 5CH – aileron, elevator, throttle, rudder/steering, flap
- CG: 61mm from the leading edge
- Wing Load: 87.5g/dm²
- Wing Area: 40dm²
- Recommended Battery: 6S 5000–6000mAh
- Approx Flying Duration: 5–10 mins
- Assembly Time: 10 mins
- Skill Level: Intermediate
- Age Level: 14 years +
- Flap: Yes
- Retract: No
- Landing Gear: Fixed main landing gear, steerable nose gear
- Prop Size: 3-blade 10*7''
Required To Complete
- Radio
- Transmitter
- Battery and Charger
Secured by Stripe
XFLY 1800mm TWIN OTTER WITHOUT TX/RX/BATT
Modeled after DeHavilland DHC-6 Twin Otter, the XFly Model Twin Otter 1800mm was developed by their team with the intention to make it true-to-scale, from design features such as cockpit with clear windows, control surfaces, fixed tricycle landing gears, twin power system setup, to STOL(Short Takeoff and Landing) capabilities.
Powered by a single 6S 5000-6000mAh LiPo battery, the combination of twin 3541-KV550 motors, twin 40A ESCs and 3-blade propellers brings RC pilots the optimum setup for power and duration. The XFly Twin Otter is capable of aerobatic maneuvers including loops, 4-point rolls and inverted flight. Shock-absorbing metal front landing gear and rigid main landing gears are equipped for easy ground handling and more durability.
Two-piece wing, removable nose and stabs make it easy to assemble, dissemble and transport. Clear glass-like windows allow for FPV installation in the cockpit for better visual experience. Clearly visible in both day and dusk conditions, the vibrant yellow/blue colour scheme and the pre-installed LED lights not only add scale appeal but practical visual reference in the sky.
Features
- Retaining scale features of the full scale Twin Otter
- STOL (Short Takeoff and Landing) capabilities
- Cockpit with clear windows, control surfaces, fixed tricycle landing gears
- Factory-installed twin efficient power system
- Capable of aerobatic maneuvers including loops, 4-point rolls and inverted flight
- Shock-absorbing metal front landing gear and rigid main landing gears
- Two-piece wing, removable nose and stabs
- Clear glass-like windows and capacious cockpit allow for FPV installation
- Pre-installed LED lights for added visibility
- Vibrant yellow/blue colour scheme
Specifications
Overall Length: 1457mm/57.4in
Flying Weight: 3700g
Motor Size: 3541-KV550*2
ESC: 40A*2
Servo: 13g servos*2
Channels: 5CH- aileron, elevator, throttle, rudder/steering, flap
CG: 61mm from the leading edge
Wing Load: 87.5g/dm²
Wing Area: 40dm²
Recommended Battery: 6S 5000-6000mAh
Approx Flying Duration: 5-10 mins
Assembly Time: 10 mins
Skill Level: Intermediate
Age Level: 14 years +
Flap: Yes
Retract: No
Landing Gear: Fixed main landing gear, steerable nose gear
Prop Size: 3-blade 10*7''
Required To Complete
- Radio
- Transmitter
- Battery and Charger
Key Info:
- Brand: XFly
- Part No: XF116P
- Barcode: 5056135768716
- Power: Electric
- Assembly Level: PNP (Plug n Play) / RR
- Flying Style: Sport
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
Excellent service and a great looking model. Courier did however badly damage packing box but fortunately the model was undamaged due to the thick protective internal packing foam. Suggest you have a word with your couriers Wheelspin.
WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.
XFly Twin Otter Battery Hatch
XFly Twin Otter 10 X 7 3-Blade Propeller (1Pc)
XFly Twin Otter Decal Sheet
XFly Twin Otter Spinner (1Pc)
XFly Twin Otter Linkage Set
XFly 9G Digital Mg Servo Reverse With 450mm Lead
XFly Y Power Lead
XFly Twin Otter Wing Connector Set
XFly Twin Otter Wheel Set
XFly Twin Otter Control Horns + Hinges
XFly Twin Otter Float Set
XFly Twin Otter Rear Fuselage
CML Racing Xfly 13G Digital Metal Gear Servo Positive With 550mm Lead
XFly 5A Ubec
XFly Twin Otter Main Landing Gear