XFly Twinliner 40mm EDF - ARTF
Brand: XFly
Part No: XF118PR
In Stock: Usually ships same day
Add a radio, battery and charger to get your new model up and flying in no time
ET0225
RLKT121006
OL-3531
Saves £43.69 over RRP
The XFly Twinliner 40mm EDF – ARTF (w/o TX/RX/BATT) brings classic airliner style to a compact, twin-EDF jet. Its fully painted airframe features a scale outline, twin efficient 40mm 12-blade fans and dual-wheel landing gear for confident ground handling. A factory-installed power system with 1413-KV5000 brushless motors and twin 20A ESCs pairs with a recommended 4S 1300–2600mAh LiPo to deliver strong thrust for vertical climbs, rolls and loops, with sensible throttle management offering approximately 5–10 minutes of flight time.
Thoughtful layout places the battery bay mid-fuselage to make achieving the correct centre of gravity straightforward. Assembly is quick and glue-free, and the model’s convenient size makes it easy to transport fully assembled to large parks, sports fields or RC flying sites. Available with decals pre-applied, or supplied separately for those who prefer custom finishes.
Features
- Scale outline and great presence in the air
- Efficient twin 40mm EDF power system delivering ample thrust for vertical climbs, rolls and loops
- Landing gear with dual wheels for strong grip, accuracy and stability
- Mid-fuselage battery compartment to easily achieve proper C.G.
- Extended flight time of 5–10 minutes with recommended 4S 1300–2600mAh LiPo
- Quick, simple assembly with no glue required
Specifications
- Wingspan: 1010mm (39.8in)
- Overall Length: 990mm (39in)
- Flying Weight: 750g
- EDF: Twin 40mm 12-blade
- Motor: 1413-KV5000 ×2
- ESC: 20A ×2
- Servos: 9g ×2, 4.3g ×2
- Channels: 4 (aileron, elevator, throttle, rudder/steering)
- CG: 93mm from the leading edge
- Wing Area: 10dm²
- Wing Loading: 75g/dm²
- Recommended Battery: 4S 1300–2600mAh LiPo
- Approx. Flight Time: 5–10 minutes
- Assembly Time: ~15 minutes
- Skill Level: Intermediate
- Age Level: 14+
- Flaps: No
- Retracts: No
- Landing Gear: Fixed mains, steerable nose gear
Note: This ARTF version is supplied without transmitter, receiver or battery as indicated (w/o TX/RX/BATT).
Secured by Stripe
XFLY TWINLINER 40MM EDF JET w/o TX/RX/BATT
XFly Model is excited to announce its first passenger EDF jet Twinliner in the twin 40mm EDF lineup. The Twinliner features a scale outline and details of a classic airliner including twin efficient engines and landing gears with dual wheels. The factory-installed power system, twin 40mm fans with 1413-KV5000 brushless motors and twin 20A brushless ESCs, paired with a 4S LiPo battery, delivers an abundance of thrust for vertical climbs, rolls, loops and other maneuvers. With sensible throttle management, the Twinliner features a potential flight time of 5-10 minutes.
Both front and rear landing gears are fitted with dual wheels, which equips the plane with a strong grip to maintain accuracy and stability while taxiing on the ground before takeoff or after landing. The battery compartment is located in the middle of the fuselage, which allows the plane to easily achieve a proper Center of Gravity. Assembly is quick and simple with no glue required. The model is conveniently sized for flying at large parks, sports fields, or traditional RC flying fields and so it can be stored and transported without disassembly. It can fit fully assembled in just about any vehicle. The Twinliner is fully painted and available in two versions, decals pre-applied or NOT pre-applied (but included in the box) which is ready for any further painting or customisations.
Features
- Scale outline and great presence in the air
- Efficient twin 40mm EDF power system setup delivering an abundance of thrust for for vertical climbs, rolls, loops and other maneuvers
- Landing gears with dual wheels designed for strong grip, accuracy and stability
- Battery compartment designed to easily achieve a proper C.G.
- Extended flight time of 5-10 mins when using recommended 4S 1300-2600mAh LiPo battery
- Quick and simple assembly without glue needed
Specifications
Wingspan: 1010mm/39.8in
Overall Length: 990mm/39in
Flying Weight: 750g
Motor Size: 1413-KV5000 *2
ESC: 20A *2
Servo: 9g servos*2, 4.3g servo*2
Channels: 4CH- aileron, elevator, throttle, rudder/steering
CG: 93mm from the leading edge
Wing Load: 75g/dm²
Wing Area: 10dm²
Recommended Battery: 4S 1300-2600mAh
Approx Flying Duration: 5-10 mins
Assembly Time: 15 mins
Skill Level: Intermediate
Age Level: 14 years +
Flap: No
Retract: No
Landing Gear: Fixed main landing gear, steerable nose gear
EDF Size: 40MM EDF 12-Blade *2
Key Info:
- Brand: XFly
- Part No: XF118PR
- Barcode: 5056135775219
- Assembly Level: ARTF (Almost RTF)
- Flying Style:
• EDF Jets
• Scale - Power: Electric
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
This twinliner flies real very well take off from grass is very short plenty of power good turn of speed just it bit hard to see if to far away from you need plenty of expo as well or it's very twitch .
WRITE A REVIEW
Questions & Answers
No that is ARTF so requires transmitter , receiver , battery and charger.
That is ARTF so does not include transmitter or receiver or battery or charger. Spares can be found by typing in twinliner on the search bar.
ASK A QUESTION
For more in depth queries, please contact us.

























XFly Eagle Battery Hatch - Red ** CLEARANCE **
XFly Eagle Battery Hatch - Green
XFly Twinliner Battery Hatch
XFly Twin 40mm Su-57 Nose Cone
XFly Eagle Decal Sheet - Green
XFly Twin 40mm F-14 Control Horns
XFly Twinliner Wheel Set
XFly Twin 40mm Su-57 Wing Spar
XFLY 1413-KV5000 MOTOR
X-Fly Pilot 003
XFly Twin 40mm F-14 Center Aluminium Wing Spar
XFly Twinliner Screw Set
XFly Twin 40mm Su-57 Control Horns
XFly Twin 40mm F-22 Screw Set
XFly Twinliner Landing Gear Set