XFly X1500 Long Endurance FPV - Red - Kit Only
Brand: XFly
Part No: XFW004K-R
Shadow Stock: Usually ships next day
The XFly X1500 Long Endurance FPV Kit Only in Red is a robust fixed‑wing platform designed for extended missions and efficient cruising. Built from wear‑resistant EPP foam with high‑strength 3D‑printed reinforcement, it uses a glue‑free, quick‑assembly design so you can be flight‑ready in around two minutes. This KIT version (part XFW004K-R) couples durability with practicality for pilots seeking a dependable FPV airframe with pre‑installed drive components.
A conventional fixed‑wing layout and high‑lift airfoil deliver smooth, predictable handling and excellent cruise efficiency. The twin power system offers strong performance with a thrust‑to‑weight ratio greater than 1 in unloaded conditions and supports payloads up to 1 kg. With optimised aerodynamics, an aligned thrust line and a well‑balanced centre of gravity, the X1500 can be launched by hand or via a short ground roll. Reinforced rubber tyres on the underside support repeated take‑offs and landings.
The spacious battery bay accepts a standard 21700 4S2P 10000mAh pack (not included) with room for additional payloads. A dedicated mid‑fuselage equipment compartment provides ample space for flight controllers, GPS modules and other avionics. Pre‑configured mounting points on the FPV nose cone and battery hatch offer suggested compatibility with popular FPV systems such as DJI and Walksnail, enabling quick integration of your preferred video link.
Key Features
- Glue‑free quick‑assembly design for rapid deployment.
- Twin, efficient power system for powerful, long‑endurance performance.
- Wear‑resistant EPP foam and reinforced rubber tyres for durability.
- Easy hand launch or short ground‑roll take‑off and landing.
- Spacious compartments for straightforward avionics integration.
- Pre‑configured FPV mounting points with suggested compatibility for DJI and Walksnail systems.
Specifications
- Material: Durable EPP foam
- Wing Span: 1500mm (59.0in)
- Length: 1050mm (41.3in)
- Flying Weight: Around 1900g
- Servo: 9g metal‑gear servo x5 (installed)
- Motor: 2212 1400Kv outrunner brushless motor x2 (installed)
- ESC: 40A brushless ESC x2 (installed)
- Propeller: 8 x 5 two‑blade CW & CCW set (included)
- Battery: 21700 4S2P 10000mAh (not included)
- Radio: 6‑channel radio control (not included)
Suggested Compatibility
- FPV mounting points on the nose cone and battery hatch with suggested compatibility for DJI and Walksnail FPV systems.
Secured by Stripe
XFly X1500 is a long-endurance FPV platform designed for extended flight operations. Constructed from wear-resistant EPP foam and reinforced with high-strength 3D-printed plastic parts, it features a glue-free quick-assembly design that allows deployment within two minutes.
The aircraft adopts a conventional fixed-wing layout, delivering smooth and predictable flight characteristics. Its high-lift airfoil ensures efficient cruise performance, ideal for long-duration missions. Equipped with a twin power system, the X1500 achieves a thrust-to-weight ratio greater than 1 in unloaded conditions, while supporting payloads of 1KG. With its optimised aerodynamics, carefully aligned thrust line and balanced center of gravity, the X1500 can take off effortlessly either by hand launch or via ground roll. Reinforced rubber tyres on the underside enable durable repeated takeoffs and landings.
The spacious battery bay accommodates a standard 21700-4S2P-10000mAh battery (not included) with additional room for extra payloads. A dedicated equipment compartment in the mid-fuselage provides ample space for installing flight controllers, GPS modules, and other avionics. Pre-configured mounting points on the FPV nose cone and battery hatch are compatible with DJI and Walksnail FPV systems, allowing quick integration of video transmission setups. The X1500 is offered in both PNP and KIT versions, giving pilots the flexibility to customise their power and battery configuration according to specific mission requirements.
Features- Glue-free quick-assembly design.
- Twin efficient power system for a powerful and long-endurance flight experience.
- Wear-resistant EPP foam and rubber tires for improved durability.
- Effortlessly hand-launch or wheeled takeoff/landing.
- Spacious compartments allowing easy integration of multiple avionics.
- Compatible with mainstream FPV systems like DJI and Walksnail.
Material: Durable EPP Foam
Wing Span: 1500mm (59.0in)
Length: 1050mm (41.3in)
Flying Weight: Around 1900g
Servo: 9g Metal Gear Servo x 5 (Installed)
Motor: 2212 1400Kv Outrunner Brushless Motor x 2 (Installed)
ESC: 40A Brushless ESC x 2 (Installed)
Propeller: 8 x 5 2 Blade Propeller CW & CCW x 1 Set (Included)
Battery: 21700 4S2P 10000mAh (Not Included)
Radio: 6 Ch Radio Control (Not Included)
Key Info:
- Brand: XFly
- Part No: XFW004K-R
- Barcode: 5056135796221
- Power: Electric
- Flying Style: FPV (First Person Video)
- Assembly Level: Kit (Unassembled)
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.



























XFly X1500 Battery Hatch
XFly X2100 8X5 (Cw + Ccw) 2-Blade Propeller
XFly X1500 Main Wing Set
XFly 40A ESC(6S Version)
XFly X1500 Linkage Set
XFly X1500 Rear Wheel Set
XFly X1500 Foam Nose Cone
XFly 9G Digital Mg Servo Positive With 50mm Lead
XFly X1500 LED Light Set
XFly X1500 Spinner (1Pc)
XFly X1500 Fpv Hatch
XFly X1500 Fuselage
XFly Swift 2100 Servo-Equipped Camera Mount (For Optional Fpv)
XFly X1500 Decal Sheet - Red
XFly X1500 Elevator Spar