USD
£ GBP
€ Euro
eTronix Photon 2.1W 60 AMP Splashproof Brushless ESC
Brand: eTronix
Part No: ET0126
In Stock: Usually ships same day
The eTronix Photon 2.1W 60 Amp Splashproof Brushless ESC (ET0126) delivers dependable 1/10 scale performance with a 60A constant current and up to 380A burst. It supports 2–3S LiPo or 5–10S NiMH/NiCd packs and features a 2A/6V BEC for reliable receiver and servo power. Tuning is available via the optional Photon set-up card ET0107 (available separately), enabling adjustment of ten parameters to suit your driving style and conditions.
Suggested compatibility: 1/10 scale RC applications using sensorless 4‑pole brushless motors within the stated KV limits. When selecting an ESC or combo, always observe the motor and battery cell count limits below.
ESC Motor Limit
- 2S Battery - 4350KV
- 3S Battery - 2950KV
- 4S Battery - Not Compatible
Spec Check
- Splashproof
- 2-3S Lipo
- 5-10S NiMH/NiCd
- 2A 6V BEC Output
- 4 Pole sensorless brushless motor
- 60A Constant Current
- 380A Burst Current
- Dimensions 45x33x37mm (without fan)
- Weight 90g
Secured by Stripe
With systems available ranging from 45A through to 120A there is something within the Photon range for every 1/10th application. With the additional programmable set up card (ET0107) the user can finely tune ten different parameters within the ESC to suit their particular needs. (available separately)
When choosing your new ESC/ESC and motor combo, please take note of the relevant motor and battery cell count limits.
ESC Motor Limit:
- 2S Battery - 4350KV
- 3S Battery - 2950KV
- 4S Battery - Not Compatible
- Splashproof
- 2-3S Lipo
- 5-10S NiMH/NiCd
- 2A 6V BEC Output
- 4 Pole sensorless brushless motor
- 60A Constant Current
- 380A Burst Current
- Dimensions 45x33x37mm (without fan)
- Weight 90g
Key Info:
- Brand: eTronix
- Part No: ET0126
- Barcode: 5055323978838
- Motor Type: Brushless
- LiPo Compatible: Yes
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
Questions & Answers
Yes it will .
That will not have the power for that application - you need this system ideally to run 3s: TRX3350R
Yes but vice versa will not work.
No this needs connectors soldering
This one is already soldered with deans connector on it
wheelspinmodels.co.uk/i/311912/
2S will be your sweet spot on these
They are 60A
I think you'd want a higher amp rating for a 9T motor
Fittings? Not too sure what you mean but yes they drop straight into moist cars...
Correct - ET0129 is the later, waterproof design.
ASK A QUESTION
For more in depth queries, please contact us.