Arrows Hobby F-86 64mm EDF PNP 860mm ARRAH024P
Brand: Arrows Hobby
Part No: ARRAH024P
Usually ships next day
Customers Also Buy
Popular with customers who buy products like the Arrows Hobby F-86 64mm EDF PNP (860mm)
Description
The Arrows Hobby F-86 64mm EDF PNP (860mm), part ARRAH024P, is a 4S electric ducted-fan jet aircraft supplied as a plug-and-play (PNP) model. Based on the F-86 Sabre, it has an EPO foam airframe with a scale colour scheme and is designed for outdoor radio-controlled flying. The factory-finished fuselage, two-piece wing, tailplane, fin and rudder use screw-together assembly, so no glue is required and the stated assembly time is approximately 30 minutes.
The power system is installed before flight, including a 2840 3150KV brushless motor, 64mm 12-blade fan and 40A electronic speed controller with an XT60 connector. Eight pre-installed 9g servos operate the model's controls, while the steerable nose wheel provides ground steering. The undercarriage and drop tanks can be removed quickly, and the canopy hatch is held in place magnetically. The airframe has an 860mm wingspan, a 820mm length and a 15dm2 wing area.
Features
The F-86 is intended for pilots looking for an EDF model with straightforward assembly and a conventional five-channel radio system. Its suggested battery is a 4S 14.8V 2200–2700mAh 35C LiPo, with the 2700mAh 35C flight pack identified by the manufacturer as a suitable option. The model uses ball-joint control linkages, a wing spar and a fixed or removable wheel set.
- EPO foam F-86 airframe with scale colour scheme
- Pre-installed 64mm 12-blade EDF power system
- Eight pre-installed 9g servos
- Steerable nose wheel and removable undercarriage
- Screw-together assembly with magnetic canopy retention
What's Included
The supplied airframe components are factory assembled and finished. The package also includes the parts needed to complete the model mechanically, including the wing spar, screw and pushrod set, instruction manual and finished drop tank set.
- Factory assembled and finished fuselage
- Factory assembled and finished two-piece wing
- Factory assembled and finished tailplane, fin and rudder
- Finished drop tank set and wing spar
- Pre-installed 2840 3150KV brushless motor
- Pre-installed 40A ESC with XT60 connector
- Eight pre-installed 9g servos
- 64mm fan, undercarriage, wheel set and hardware
Required to Complete
A five-channel transmitter and receiver combination, a suitable 4S LiPo battery and a LiPo balance charger are required before flying. The battery should have an XT60 connector and a 35C rating, with capacity between 2200mAh and 2700mAh.
- Five-channel transmitter and receiver combination
- 4S 2200–2700mAh 35C LiPo with XT60 connector
- 4S-compatible LiPo balance charger
Secured by Stripe
Arrows Hobby F-86 64mm EDF PNP (860mm) Manuals & Guides
Manuals & Guides
Specifications
Arrows Hobby is making EDF ownership increasingly more attractive with its range of unencumbered, performance EPO jets - jets that take all the age-old qualms of getting involved in EDF and consign them to the annals of history. It all began with the introduction of the outstanding 64mm Marlin, closely followed by the 50mm Viper and, more recently, the 50mm Hawk and T-33. All superb aeroplanes with delightful flying characteristics and, most importantly, terrific power reserves and incredible duration. And here s the cause for excitement. Born of the same design principles as the Marlin, equipped with the same powertrain and sporting the same authoritative performance, the 64mm 4S F-86 is every bit as good with, of course, the added bonus of being modelled on one of the most iconic fighters of the early jet age.
Not only is this an eye-catching scale model, with an aerobatic envelope to rival the very best that the EDF world can offer, it's also a jet that ll look after you when you re finding your feet and challenge you when you ve found them. From large sky-eating loops to locked-in point rolls, s-l-o-w full flap passes and everything in-between, you ll find the F-86 so versatile that it ll quickly become a Sunday favourite.
Assembling the Sabre is simplicity itself and with no glue required you can be airborne within an hour of opening the box. Just add a 4S 2700mAh 35C flight pack (RDNBS2700S4C50X6), a 5-channel Tx and Rx combo and go punch holes in the sky.
Arrows Hobby F-86 64mm EDF PNP (860mm) Key Features:
- Arrows Hobby is making EDF ownership increasingly more attractive with its range of unencumbered, performance EPO jets - jets that take all the age-old qualms of getting involved in EDF and consign them to the annals of history. It all began with the introduction of the outstanding 64mm Marlin, closely followed by the 50mm Viper and, more recently, the 50mm Hawk and T-33. All superb aeroplanes with delightful flying characteristics and, most importantly, terrific power reserves and incredible duration. And here s the cause for excitement. Born of the same design principles as the Marlin, equipped with the same powertrain and sporting the same authoritative performance, the 64mm 4S F-86 is every bit as good with, of course, the added bonus of being modelled on one of the most iconic fighters of the early jet age.
Not only is this an eye-catching scale model, with an aerobatic envelope to rival the very best that the EDF world can offer, it's also a jet that ll look after you when you re finding your feet and challenge you when you ve found them. From large sky-eating loops to locked-in point rolls, s-l-o-w full flap passes and everything in-between, you ll find the F-86 so versatile that it ll quickly become a Sunday favourite.
Assembling the Sabre is simplicity itself and with no glue required you can be airborne within an hour of opening the box. Just add a 4S 2700mAh 35C flight pack (RDNBS2700S4C50X6), a 5-channel Tx and Rx combo and go punch holes in the sky. - Arrows Hobby is making EDF ownership increasingly more attractive with its range of unencumbered, performance EPO jets jets that take all the age-old qualms of getting involved in EDF and consign them to the annals of history. It all began with the introduction of the outstanding 64mm Marlin, closely followed by the 50mm Viper and, more recently, the 50mm Hawk and T-33. All superb aeroplanes with delightful flying characteristics and, most importantly, terrific power reserves and incredible duration. And here s the cause for excitement. Born of the same design principles as the Marlin, equipped with the same powertrain and sporting the same authoritative performance, the 64mm 4S F-86 is every bit as good with, of course, the added bonus of being modelled on one of the most iconic fighters of the early jet age.
Not only is this an eye-catching scale model, with an aerobatic envelope to rival the very best that the EDF world can offer, it's also a jet that ll look after you when you re finding your feet and challenge you when you ve found them. From large sky-eating loops to locked-in point rolls, s-l-o-w full flap passes and everything in-between, you ll find the F-86 so versatile that it ll quickly become a Sunday favourite.
Assembling the Sabre is simplicity itself and with no glue required you can be airborne within an hour of opening the box. Just add a 4S 2700mAh 35C flight pack (RDNBS2700S4C50X6), a 5-channel Tx and Rx combo and go punch holes in the sky. - Authentic EPO foam airframe with scale colour scheme.
- Screw together assembly.
- High quality hardware.
- Ball joint control linkages.
- Outstanding power-to-weight ratio.
- Magnetic canopy hatch retention.
- Suits 4S 14.8V 2200 to 2700mAh 35C LiPo.
- Eight pre-installed high quality servos.
- Steerable nose wheel.
- Quick release undercarriage and drop tanks.
- 30 minute assembly time.
- Takes standard 5-channel radio.
What's in the Box:
- 1x Factory assembled and finished fuselage.
- 1x Factory assembled and finished 2-piece wing.
- 1x Factory assembled and finished 1-piece tailplane.
- 1x Factory assembled and finished fin and rudder.
- 1x Factory finished drop tank set.
- 1x Wing spar.
- 1x Pre-installed 2840 3150KV brushless motor.
- 1x Pre-installed 40A ESC with XT60 connector.
- 8x Pre-installed high quality 9g servos.
- 1x Fixed / removable undercarriage and wheel set.
- 1x Pre-installed 64mm 12-blade fan.
- 1x Screw and pushrod set.
- 1x Comprehensive instruction manual.
Needed to Complete:
- 1x 5-channel transmitter and receiver combo.
- 1x 4S 2200 to 2700mAh 35C LiPo with XT60 connector.
- 1x 4S compatible LiPo balance charger.
Arrows Hobby F-86 64mm EDF PNP (860mm) Tech Specs:
- Shipping Weight: 2.10kg / 4.63lbs
- Product Length: 820mm / 32.3in
- Product Wingspan: 860mm / 33.8in
- Product Wing Area: 15dm2 / 235in2
- Completion Level: PNP
- Experience Level: Intermediate / Advanced.
- Assembly Time: 30min
- Recommended Usage Environment: Designated outdoor model flying facility.
- Material: EPO
Key Info:
- Brand: Arrows Hobby
- Part No: ARRAH024P
- Barcode: 5051121258837
- Flying Style:
• EDF Jets
• Sport - Power: Electric
- Assembly Level: PNP (Plug n Play) / RR
Delivery & Returns
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Customer Reviews
No specific product reviews yet, why not write one?Questions & Answers
No this does not include a vector unit.
Yes its this one ARRVEC-AH010
For more in depth queries, please contact us.































