Your Cart: £0.00

Spend £100.00 more for free shipping!

View Cart and Checkout
Arrows Hobby Vector 6 Axis Gyro System

Arrows Hobby Vector 6 Axis Gyro System

Brand: Arrows Hobby

Part No: ARRVEC-AH010

£19.94 RRP £20.99

In Stock: Usually ships same day

Collect Instore

The Arrows Hobby Vector 6 Axis Gyro System (ARRVEC-AH010) is designed to act as a dependable R/C co-pilot, ready to help when you need it. With three transmitter-controlled flight conditions, it smooths out turbulence and assists with control while remaining unobtrusive.

In Stability Mode the unit automatically returns the aircraft to level flight when no control inputs are detected, making it well-suited to newer pilots and for quick recovery from errors. Switch to Dynamic Mode to retain full manual control while the Vector subtly reduces the effects of turbulence for smoother handling. Direct Mode disables assistance entirely for an unfiltered flying experience.

This compact, lightweight, fit-and-forget unit installs between your receiver and servos for a straightforward setup. Suggested compatibility includes S.Bus and PPM control systems.

Key Features

  • 6-axis gyro stabilisation for R/C aircraft
  • Three selectable modes: Stability, Dynamic and Direct
  • Auto-levelling in Stability Mode when no inputs are detected
  • Turbulence damping in Dynamic Mode
  • Direct Mode bypass for flying without intervention
  • Compact, lightweight design
  • Inline installation between receiver and servos
  • Suggested compatibility: S.Bus and PPM control systems

Tech Specs

  • Colour: Blue
  • Shipping weight: 0.02 kg (0.05 lbs)

Designed specifically to be the perfect R/C co-pilot, the Vector Flight Control System sits waiting in the wings (not literally) ready to be employed when you need it most. Three transmitter-controlled flight conditions are available. In Stability Mode the unit automatically returns your aircraft to level flight when no control inputs are detected. This is perfect for beginners and instrumental in correcting mistakes that have the potential to ruin your day. Switch to Dynamic Mode and full control of your model is regained, the Vector assisting only to reduce the effect of turbulence, resulting in significantly smoother flying characteristics. Finally, Direct Mode switches the Vector off, allowing you to experience a flight without electronic intervention. Suitable for both S.Bus and PPM control systems the Vector is a small, lightweight, fit and forget unit that lies between your receiver and servos and promises to simply and effectively improve performance and correct mistakes.

Manuals & Parts Explosions:

Manual

Arrows Hobby Vector 6 Axis Gyro System Tech Specs:

  • Shipping Weight: 0.02kg / 0.05lbs
  • Age Recommendation: 14+
  • Colour: Blue


    Key Info:
    • Brand: Arrows Hobby
    • Part No: ARRVEC-AH010
    • Barcode: 5051121252774
    Standard Shipping

    £3.95 to most of the UK

    Express Shipping

    £6.95 to most of the UK

    Worldwide Shipping

    Available at checkout

    Reviews
    No specific product reviews yet, why not write one?
    WRITE A REVIEW
    All reviews are subject to moderation
    Questions & Answers
    Real questions from real customers. Why not ask your own?
    can i use this for a flying wing platform like an AR wing Classic
    Joel / 31st December 2025

    Yes you could

    Steve @ Wheelspin Models
    Does this fully stabilise the plane making it a good add on to a plane without one making it easy for a beginner?
    Pip Casey / 5th December 2025

    Yes it does but it is not magic bullet ,  you still need to fly the plane but it is designed to assist with flying and make learning easier , the main thing to learn is make your mistakes up high and give yourself chance to get out of a bad Manoeuvre.

    Steve @ Wheelspin Models
    Will this work with the Arrows Hobby P-51 Mustang (Detroit Miss) PNP with Retracts (1100mm)?
    Pip Casey / 4th December 2025

    Yes it will.

    Steve @ Wheelspin Models
    will this fit a efly tasman
    David Needham / 11th June 2024

    Yes that should work.

    Rich @ Wheelspin Models
    Will this work with the arrow bae hawk 50 mm with flysky fs i4 x with A6 reciever thanks
    Kevin / 29th April 2024

    Yes this is an inline gyro system so would work in most planes with most transmitters.

    Si @ Wheelspin Models
    Do the vector gyros work well on Arrows Hobby aircraft
    Peter / 21st December 2023

    Yes they are designed for these planes.

    Steve @ Wheelspin Models
    Does the Arrows Hobby Vector 6 Axis Gyro System work with a Spektrum Rx and 6e Tx ? If so I want 3
    Ian Lauder / 15th November 2023

    Yes it will but it is only really suggested for certain planes and is quite slow , most people tend to use the reflex system instead FMSREF001

    Steve @ Wheelspin Models
    Hi guys, Will this suit any aircraft or is it specifically for the Arrows Bigfoot? I guess what I’m saying is, is it programmable. Cheers, Phil
    Phil / 27th September 2023

    That is recommended for the bigfoot only , we would suggest this as a more universal alternative FMSREF001

    Steve @ Wheelspin Models
    What wind speed is this rated for?
    Gaz / 26th September 2023

    This information is not supplied by the manufacturers as this is designed for the bigfoot which is quite a slow plane.

    Steve @ Wheelspin Models
    Can this be used with helicopters
    Stuart / 27th July 2023

    This could possibly work but the system programmed for separate Arrows models, it is very basic and does not have channel reverse, the chances of it being set up correctly for a heli is remote. We would not recommend this for heli's.

    Steve @ Wheelspin Models
    Will the 6 axis flight controller work with just throttle rudder and elevator servos i.e. three channel control
    Spencer / 25th June 2023

    yes this would work just having the Rudder and elevator plugged in .

    Si @ Wheelspin Models
    thanks for clarifying Steve. (see below) so is this gyro Spectrum compatible with a standard RX please ? Yes this will work with Spektrum but we would recommend using the spektrum reciever with the AS3X in it SPMAR637T Answered by: Si @ Wheelspin Models
    Andy / 28th April 2023

    yes that will work fine with a standard none as3x safe receiver.

    Steve @ Wheelspin Models
    Hi. if the SPMAR637T has built in AS3X why would you need the Vector 6 please ?
    Andy / 28th April 2023

    You would use one or the other , 2 gyros would work against each other.

    Steve @ Wheelspin Models
    Hi, is this vector 6 Spektrum compatible please?
    Andy / 5th April 2023

    Yes this will work with Spektrum but we would recommend using the spektrum reciever with the AS3X in it SPMAR637T

    Si @ Wheelspin Models
    ASK A QUESTION
    Get early access to deals and new arrivals.
    Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.

    For more in depth queries, please contact us.