GBP
eTronix Photon 2.1FW 60A ESC Combo 9.0R 4350kV
Brand: eTronix
Part No: ET0422
No longer available
This item has been discontinued. Contact our team and we'll help you find an alternative.
Description
The eTronix Photon 2.1FW Waterproof 60A ESC Combo with 9.0R 4350kV Motor (part number ET0422) delivers the simplicity and performance of a sensorless brushless system for 1/10 scale models. Supplied with the ET0107 programmable set-up card, you can fine-tune ten parameters to match your driving style and track conditions.
Suggested Compatibility
- 1/10 buggy
- 1/10 truggy
- 1/10 short course
- 1/10 truck
Key Features
- Waterproof ESC design
- Sensorless brushless system for straightforward set-up
- Includes ET0107 programmable set-up card
- Ten adjustable parameters for precise control
- 60A continuous current, 380A burst
- BEC output: 6V/2A
Adjustable Parameters
- Cutoff Voltage (auto cell detection)
- Running Mode (forward w/o reverse, forward/reverse, forward with pause then reverse)
- Motor Timing (very low, low, normal, high, very high)
- Initial Acceleration (low, medium, high, very high)
- Throttle Percent Reverse (20% to 100%)
- Throttle Limit (0% to 90%)
- Percentage Braking (10% to 100%)
- Percentage Drag Brake (0% to 30%)
- Motor Rotation (normal, reverse)
- Neutral Range (deadband 2% to 10%)
ESC Motor Limit
- 2S battery: 4350kV
- 3S battery: 3450kV
- 4S battery: 2950kV
ESC Specifications
- Battery: 5–10 cell NiMH/NiCd or 2–3S LiPo
- BEC Output: 6V/2A
- Resistance: 0.0007 ohm
- Motor Type: 4-pole sensorless brushless motor
- Max Continuous Current: 60A
- Burst Current: 380A
- Waterproof: Yes
- Dimensions: 44 x 32 x 37 mm (without fan)
- Weight: 95 g
Refer to the ESC motor limit guidance above when pairing motor kV with your chosen battery cell count.
Secured by Stripe
Specifications
The convenience and performance of brushless technology is available for everyone with the Photon Sensorless Waterproof System from Etronix. Simple to set-up and with a range of sensible KV rated motors for most r/c car applications and abilities the Photon is the ideal brushless start-up package or upgrade from a stock brushed set-up.An ideal choice for any 1/10th buggy, truggy, short course or truck application.
With the supplied programmable set up card (ET0107) the user can finely tune ten different parameters within the ESC to suit their particular needs.
When choosing your new ESC/ESC and motor combo, please take note of the relevant motor and battery cell count limits.
ESC Motor Limit:
- 2S Battery - 4350KV
- 3S Battery - 3450KV
- 4S Battery - 2950KV
- Cutoff Voltage (automatically detects the number of cells)
- Running Mode (forward w/o reverse, forward/reverse, forward with pause then reverse)
- Motor Timing (very low, low, normal, high, very high)
- Initial Acceleration (low, medium, high, very high)
- Throttle Percent Reverse (20% through to 100%)
- Throttle Limit (0% through to 90%)
- Percentage Braking (10% through to 100%)
- Percentage Drag Brake (0% through to 30%)
- Motor Rotation (normal, reverse)
- Neutral Range (deadband setting 2% through to 10%)
- 5-10 Cell NiMH/NiCd) or 2-3S LiPo
- BEC Output: 6V/2A
- Resistance: 0.0007ohm
- Motor Type: 4 Pole sensorless brushless motor
- Max Continuous Current: 60A
- Burst Current: 380A
- Waterproof: Yes
- Dimensions : 44x32x37mm (without fan)
- Weight : 95g
Key Info:
- Brand: eTronix
- Part No: ET0422
- Barcode: 5055323967887
Delivery & Returns
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Customer Reviews
No specific product reviews yet, why not write one?Questions & Answers
These come pre-soldered with a deans connector.
This will fit the 1/10th touring car no problem, this system is a 2s only system so will not run 3 or 4s lipo.
This will work for you yes, the ESC may be a litte large to find space for in the chassis, you could look at HW38020319 but this will require soldering
Yes it will fit fine and run comfortably on 2s lipo.
The KV rating is the motor, so the motor KV is 4350, this means the motor will do 4350rpm for every 1 volt of power that it has, so if using a 7.4v 2s lipo 4350 x 7.2 = total RPM
The motor shaft will be 3.2mm
With your car being off road, we would recommend the lower KV version ET0411 using 2s lipo or ET0410 using 3s lipo
The 4350kv is for more on road and flat surfaces.
It would fit yes - but probably a bit underpowered. I'd look at say HW38010203 instead
Yes this would be spot on for that car.
This will physically fit but is probably a bit underpowered.
HW38010203 would be a better choice
This would be too powerful, you would need the Hobbywing Axe system.
Yes this is a brushless upgrade
The motor has bullets on it, but they do not come with a battery connector.
The stampede is a bit heavy for this, especially on 3S. You'd need to be looking at a much higher rated system to run 3S in that, something like perhaps HW38010200
We'd reccomend a 2S LiPo. Something like VZ0317 would be ideal
We don't sell HSP so it's difficult for us to advise fully, however if your car takes standard 540 size motors (which is likely) then yes - this should fit.
As with any motor upgrade, it's important to keep an eye on temperatures and gear accordingly to avoid damage.
This combo comes with a program card.
We'd probably go for a lower KV such as the ET0420
As with any motor/ESC setup, always keep an eye on temperature and gear accordingly.
Hmm, it's more suited to lighter vehicles.
For that truck we'd start with say ET0430
This is a standard 1:10 scale system. The only model from your list we sell is the FTX Viper, which I can confirm this would physcially fit - however it's bit underpowered.
This is ideally suited to 1:10 touring cars.
Yes it will fit, however we'd recommend a lower KV for a Slash.
For more in depth queries, please contact us.