GBP
€ Euro
$ USD
Hobbywing MAX10 ESC Combo With 3652Sl 3300Kv Brushless Motor
Brand: Hobbywing
Part No: HW38010203
SORRY, THIS ITEM IS DISCONTINUED AND NO LONGER AVAILABLE.
Why not contact our team to see if an alternative is available?
HOBBYWING COMBO MAX10 ESC 3652SL 3300KV MOTOR
Built with high-quality components and coupled with cutting-edge firmware, the MAX10 is able to deliver unmatched power and performance for even the most extreme racing applications, but it is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.
The MAX10 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.
The waterproof and dust-proof design allows the MAX10 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.
The built-in switch mode BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V allows the use of various high voltage servos.
When pairing the MAX10 with a Hobbywing matching motor (i.e. EzRun 3652/3660 G2 motor), the temperature sensor cable on the ESC will monitor the motor temperature and protect the motor from irreversible damage due to overheating in real time.
Features
- Capacitor Thermal Protection
- High Reliability & Durability
- Super Internal BEC
- Applicable to All Weather Conditions
- Advanced and Secure Electronic Switch
- Regular Firmware Updates
Specifications
Scale: 1/10th
Brushed/Brushless: Brushless
Sensored/Sensorless: Sensorless
Waterproof: Yes
Cont./Peak Current: 60A/450A
Input: 2-3S LiPo/6-9 Cells NiMH
BEC Output: Switch Mode 6V/7.4V,3A
Input Wires: Red-14AWG-200mm*1/Black-14AWG-200mm*1
Output Wires: Black-14AWG-200mm*3
Input Connectors: No
Output Connecotors: 3.5 Bullet Connectors (Female)
Fan Size: 25.0x25.0x10.0mm
Voltage Range: 5-7.4V
Powered by: BEC
SET Button on ESC: Supported
LED Program Box: Supported
LCD Program Box: Supported
WiFi Module: Supported
Size: 39.4x32.8x23.1mm
Weight: 67.8g
The HobbyWing EzRun 3652 G2 motor features an Innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented). It has low cogging effect and torque pulsation for improved control feel around corners. The built-in temperature sensor and sensor port protect the motor from damage due to overheating when pairing with an EzRun Max10/Max10 SCT ESC.
HobbyWing EzRun 3652 G2 3300KV SL Motor Features:
- Innovative 4-pole-8-magnet "staggered pole" rotor
- Built-in temperature sensor and sensor port
- O-ring seal fitted between the front end bell and motor case
- Special design motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws
- Special technology for temperature control for less heat and more efficiency (efficiency rate of up to 90%)
- CNC machined aluminium housing, high purity copper windings and advanced rotor structure
- Rebuild-able design for easy routine maintenance
Specifications
Scale: 1/10th
Brushed/Brushless: Brushless
Sensored/Sensorless: Sensorless
Pole Count: 4
KV Rating: 3300
LiPo Cells: 2-3S
No-load Current(A): 4.3
Timing: 0 Degrees(Fixed)
O.D.(mm): 36.00
Length (mm): 52.00
Shaft Diameter (mm): 3.175
Weight (g): 218
Secured by Stripe
- Brand: Hobbywing
- Part No: HW38010203
- Barcode: 6938994407410
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
Fits nicely and works well in my 2WD slash!
Thanks to Ben@wheelspin for the advice, I have fitted one to an ECX Torment to replace the brushed set up, easy to fit and the power increase is amazing.
Brilliant product. With a 3s lipo and 29T pinion I got 60mph on muddy grass in my HPI Jumpshot sc (1:10 2wd SCT). Would definetly reccomend! Wheelspin models are the best hobby shop arround.
Absolutely transformed a Traxxas Hoss after the stock motor died. Faster and full wheelie pickup at just about any speed. Plus the ESC is multi-adjustable for things like brake force and punch, BEC voltage etc. Money very well spent
I barely know anything about motors, ESCs and RC's - but I was able to easily install it in my previously brushed stock FTX Carnage car. The guys at Wheelspin were really helpful and helped to avoid me getting an overly powerful setup which would have turned my gears to a plastic paste! The car shot off like a bullet. I'm glad I didn't choose anything faster :)
WRITE A REVIEW
Questions & Answers
Yes, these will work for you
The maximum this can use is 3s lipo, with gear ratios it would depend what car, what surface, and what you are doing with the car ( speed runs or general bashing ) so its hard to give you an answer on that.
Yes this would work speed would depend on gearing and crawlers have quite slow gearing in the diffs so i would expect the maxium speed to be around 35 mph on 3s lipo with that combo.
No this will not fit.
You would ideally use a 3s ( 11.1v ) lipo battery
Yes that would work fine .
This will work for you ( I would use the highest Mah possible ) but will give you less performance than lipo batteries.
This should work no problem, but we would advise a bearing kit and metal centre shaft
Yes on 2s lipo this will be fine.
This will fit in that car and make it quicker than standard, but you would loose the crawling ability.
Yes, this will fit the Carnage and be an upgrade compaired to the standard system.
this is a good replacement system yes but depending on your gearing you would still need to keep a check on the temp on 3s lipo.
This system will work very wel on both of those cars.
Yes this would work with that car
This would be fine for either unless you are racing , then check what the local club recommends.
Any decent 2S battery should work nicely. Eg say VZ0317
Yes that would fit your Outlaw.
A decent servo without going mad would be say SAV-SW0231MG
I'd look at a MAX8 not the MAX10 for that size car.
Eg HW38010400
Yes it's standard 540 size, so will fit most cars.
Just be careful putting a big increase in power through older cars.
Yes that would work
Yes it should fit.
That depends on the model you're putting it into - any 3.2mm bore pinion will work
This should fit that - these are standard 540 size and should work nicely
Yes, the motors are fine with the odd bit of water. Just bear in mind they are a mechanical item with moving parts and bearings - so will require maintainance and oiling if used in wet/muddy conditions
Yes this should work in there.
Some of these have started coming through with XT60 connectors pre-fitted, but if you require different connectors - eg say deans, then those would be worth ordering.
Yes that would be a nice upgrade
Yes that would fit in there. It won't be as fast as say the Traxxas 3S system, but it's a decent kit.
No these don't come with any mounts, but should bolt into most cars
Yes that should work well in there
This will fit most standard 1:10 motor mounts.
Eg say HPI-101317
You can use HW30502000
These are very easy to setup - get it wired in and you are ready to go.
Yes that would work OK in there
Yes that would fi
Yes that should fit
Yes that would work nicely in there
No they don't offer it with the 120A
These do not have any connectors, you will need to pop on your choice.
ASK A QUESTION
For more in depth queries, please contact us.