Your Cart: £0.00
View Cart and Checkout
Hobbywing MAX10 G2 80A ESC Combo With 3652SD 3300Kv G3 Motor
Hobbywing MAX10 G2 80A ESC Combo With 3652SD 3300Kv G3 Motor
Hobbywing MAX10 G2 80A ESC Combo With 3652SD 3300Kv G3 Motor
Hobbywing MAX10 G2 80A ESC Combo With 3652SD 3300Kv G3 Motor
Hobbywing MAX10 G2 80A ESC Combo With 3652SD 3300Kv G3 Motor
Hobbywing MAX10 G2 80A ESC Combo With 3652SD 3300Kv G3 Motor

Hobbywing MAX10 G2 80A ESC Combo With 3652SD 3300Kv G3 Motor

Brand: Hobbywing

Part No: HW38020346

£95.39 RRP £105.99

In Stock: Usually ships same day

Collect Instore

HOBBYWING COMBO MAX10 G2 80A ESC 3652SD 3300KV BLK G3 MOTORFeatures

  • The EzRun Max10 G2 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of control feel and perfectly matches the EzRun 3652/3665 SD G3 motors.
  • Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more with greater effect.
  • The smart start-stop technology is introduced to the Max10 G2 ESC. The frameless fan will not be enabled to reduced noise and saving power. The fan will only work when the temperature rises to a certain level.
  • Compared with the previous generation of the MAX10 ESC, the total capacitance of the capacitor is increased by 74% and is overheating protected. The functions improve the power delivery from the battery to the ESC to avoid it from overloading and causing capacitors to explode.
  • Smart freewheeling technology enables the MAX10 G2 to have higher drive efficiency than the previous generation, resulting in lower operating temperatures and a minimum temperature of approximately 25°C lower than the previous generation.
  • After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging.
  • The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.

Specifications

Ezrun Series:3652 SD G3
KV: 3300
P/n: 30402603
LiPo: 2-3S
R. (Ω): 0.00696Ω
No-load Current: 3.9A
Timing (deg.): 0
Motor Diameter & Length: Φ=37 / L=53
Shaft Diameter & Length: Φ=3.17 / L=15
Pole: 4
Weight (g): 227.1g

 

  • Brand: Hobbywing
  • Part No: HW38020346
  • Barcode: 6938994407526
Standard Shipping

£3.95 to most of the UK

Express Shipping

£6.95 to most of the UK

Worldwide Shipping

Available at checkout

Reviews
No specific product reviews yet, why not write one?
WRITE A REVIEW
All reviews are subject to moderation
Questions & Answers
Real questions from real customers. Why not ask your own?
Does this come with connectors fitted or do you have to solder them on yourself, Thanks Cameron
Cameron / 10th October 2024

This will come with an XT60 connector.

Rich @ Wheelspin Models
Hi...would this combination work for a brushless conversion on an FTX Banzai is it similar to the one you have done in the blogs? would the 140A be better or not? thanks..
Richard / 19th March 2024

That combo would work perfectly well in the Banzai - the ESC is quite big so will need to be mounted on the top deck. The 3300kv motor will happily run 2s or 3s.

Rich @ Wheelspin Models
hi i was just wondering what size the shaft is, is it a 5mm or 3.2mm thank you.
Allan Mcfarlane / 15th February 2024

That is 3.2mm

Steve @ Wheelspin Models
Bought this from you a while back. Noticed the reverse speed is a bit weak. Can you recommend a program card? Cheers
Graham Schofield / 14th February 2024

Yes this one HW30502001

Steve @ Wheelspin Models
Hi is this suitable for the Kyosho Optima Mid ? or would you recommend something else ? thanks
Mr Michael Wai Kin Lam / 12th December 2023

This would work but the ESC will be a bit on the big side, you would be better looking at something like this  HW38020319

Si @ Wheelspin Models
Would this work in a TT-02B?
John S / 25th November 2023

Yes this will work for you,  the ESC is a little on the bigger side, size wise but should still fit in for you.

Si @ Wheelspin Models
Hi is this a good up grade for my hpi bullet flux ?
Peter Hayward / 5th November 2023

This would work well in that car but would not be an upgrade as the original motor is a 4000KV motor 

Si @ Wheelspin Models
Would this combo be good for a 1.10 on road car for just bashing and drifting around or would you recommend a different one i want to run 2 and 3s thanks
Michael / 29th October 2023

Yes that would be perfect.

Steve @ Wheelspin Models
Good morning I’ve bought this combo and was curious if it would suffice In an arrma granite 2wd thank you with the possibility of making it four-wheel-drive thank you
Mike / 23rd September 2023

Yes this will work in that car,  if you wanted to go 4WD you can use this kit  ARA210003

Si @ Wheelspin Models
Can you recommend a heat sink cooling fan for this?.. would an arrma one fit? Cheers
Graham Schofield / 17th August 2023

We would recommend something like this

FAST36-3

Steve @ Wheelspin Models
Assuming this would work well in an outlaw? Cheers
Graham Schofield / 30th July 2023

Yes that would be perfect.

Steve @ Wheelspin Models
Would this be suitable for a ftx carnage or what would you recommend
Ben Mountford / 22nd June 2023

Yes that would be the one we would recommend for that.

Steve @ Wheelspin Models
Would this fit and be a good match for my traxxas rustler vxl 2wd
Alan / 26th April 2023

That will not have enough power you need this HW38010200 and this spur TRX3956 and this pinion TRX5640 you will remove the gearbox cover and not use that so you can see the gears. Otherwise the easiest system would be this TRX3350R

Steve @ Wheelspin Models
Would this be a good upgrade for a trx4, would it be too much or just right for crawling still?
Mark / 23rd April 2023

That is not a crawler system so you will damge it using it in the trx-4 you want the hobbywing axe system like this HW38020313 or a cheaper alternative like this HW30120402

 

Steve @ Wheelspin Models
ASK A QUESTION
Usually a few e-mails per month. We don't spam.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.

For more in depth queries, please contact us.