Customers Also Buy
Popular with customers who buy products like the Multiplex J10 Indoor Edition - Kit
Description
The Multiplex J10 Indoor Edition - Kit, part number MPX1-01633, is a 3D profile fighter kit for indoor flying. Based on the Chengdu J10, this cartoon-scale model uses a pre-printed 6mm EPP airframe with carbon reinforcement and is designed around a 3S power setup. Its low weight, uncomplicated handling and high-alpha hovering capability make it suitable for small indoor halls, while the airframe can also be flown outdoors when conditions are calm.
The four-channel control layout uses elevon mixing to manage the aircraft's flight controls. Multiplex describes the model as agile, precise and forgiving, with flight characteristics suited to pilots developing their indoor shockie flying. The compact profile design is 3D-capable, allowing the J10 to perform high-alpha manoeuvres as well as conventional flight.
This is a kit requiring the radio system, power equipment, battery and servos to be added separately. The recommended indoor jet drive set combines the motor, ESC and propeller, while a 350mAh 3S 30C LiPo provides the stated power source. Assembly is intended to take around two hours, so the model can be prepared without a lengthy build process.
What's Included
- Pre-printed EPP airframe parts set
- CFRP spar and reinforcement set
- Linkage and hardware set
- Comprehensive instruction manual
Required to Complete
- 350mAh 3S 30C LiPo battery
- 4-channel transmitter and receiver combination with elevon mixing
- Multiplex indoor jet drive set with motor, ESC and propeller
- Three Multiplex MS-8510MG servos
Specifications
- Wingspan: 640mm
- Material: EPP with carbon reinforcement
- Assembly time: approximately 120 minutes
- Recommended usage environment: indoor
- Typical flight time: 5 minutes
- Completion level: kit
- Experience level: expert
Secured by Stripe
Multiplex J10 Indoor Edition - Kit Manuals & Guides
Specifications
Trust Multiplex to take the indoor shockie theme a step further with something original, unusual and heaps of fun. Love jets? Then you re going to want a J10 profile 3D fighter. With flying characteristics that match the very best indoor models on the market this 3S-fuelled, cartoon scale Chengdu J10 is agile, precise, totally forgiving, a blast to fly and a complete joy to watch. With its low weight, uncomplicated handling and high-alpha hovering ability very few halls are too small for this one and, of course, when the wind drops the great outdoors beckons. Manufactured from pre-printed 6mm EPP with carbon reinforcement and a recommended powerset that delivers a top performance, there s little to consider but how soon you can get one airborne. Two hours will see it built, so in reality you could have it flying by the weekend, no problem.
Multiplex J10 Indoor Edition - Kit Key Features:
- Trust Multiplex to take the indoor shockie theme a step further with something original, unusual and heaps of fun. Love jets? Then you re going to want a J10 profile 3D fighter. With flying characteristics that match the very best indoor models on the market this 3S-fuelled, cartoon scale Chengdu J10 is agile, precise, totally forgiving, a blast to fly and a complete joy to watch. With its low weight, uncomplicated handling and high-alpha hovering ability very few halls are too small for this one and, of course, when the wind drops the great outdoors beckons. Manufactured from pre-printed 6mm EPP with carbon reinforcement and a recommended powerset that delivers a top performance, there s little to consider but how soon you can get one airborne. Two hours will see it built, so in reality you could have it flying by the weekend, no problem.
- 3D-capable airframe.
- A perfect introduction to shockie flying.
- Suits small indoor halls.
- Ultra-light airframe.
- 4-channel control (with mixing).
- High quality components.
- 2 hour assembly time.
- Eye-catching design.
- Durable EPP / carbon reinforced construction.
- 5 minute flight time.
What's in the Box:
- 1x Pre-printed EPP airframe parts set.
- 1x CFRP spar / reinforcement set.
- 1x Linkage and hardware set.
- 1x Comprehensive instruction manual.
Needed to Complete:
- 1x 350mAh 3S 30C LiPo.
- 1x 4-channel Tx / Rx combo with elevon mixing.
- 1x Multiplex indoor jet drive set (motor, ESC and propeller).
- 3x Multiplex MS-8510MG servos.
Videos:
Multiplex J10 Indoor Edition - Kit Tech Specs:
- Shipping Weight: 0.33kg / 0.73lbs
- Product Wingspan: 640mm / 25.20in
- Completion Level: Kit
- Experience Level: Expert
- Assembly Time: 120min
- Recommended Usage Environment: Indoor
- Material: EPP
Key Info:
- Brand: Multiplex
- Part No: MPX1-01633
- Barcode: 4059818016334
- Flying Style:
• EDF Jets
• Ultra Micro - Power: Electric
- Assembly Level: Kit (Unassembled)
Delivery & Returns
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Customer Reviews
No specific product reviews yet, why not write one?Questions & Answers
For more in depth queries, please contact us.



























