GBP
€ Euro
$ USD
Oracover Air Medium 2M Chrome (090)
Brand: Oracover
Part No: ORA321-090-002
Shadow Stock: Usually ships next day
Oracover Air Medium 2M Chrome (090) is a lightweight, heat-shrink polyester covering designed for ultra-light constructions where every gram counts. Ideal for indoor flyers, park flyers, blimps and airships, this variant has no pre-applied adhesive layer and is used with a brushed-on hotmelt adhesive to achieve a secure bond. The Chrome finish offers a crisp, colour-fast appearance with clean seams and no edge bleeding.
Supplied as a 600mm x 2,000mm roll, Oracover Air Medium is approximately 34 µm thick and is noted in the manufacturer guidance as suitable for blimps and airships up to around 4 m in length.
Key Features
- Colour-fast with no bleeding at overlaps
- Ultra-light polyester film for minimal weight applications
- No adhesive layer; use with brushed hotmelt adhesive
- Approx. 34 µm film thickness (Air Medium)
- Chrome finish for a high-impact look
- Heat-shrink covering for precise, wrinkle-free results
Specifications
- Material: Polyester
- Colour: Chrome
- Width: 600mm
- Length: 2,000mm
- Shipping weight: 0.09 kg
Recommended Accessory
- ORACOVER AIR Hotmelt Adhesive (100 ml)
- ORACOVER AIR Special Thinner (to restore brushing viscosity if needed)
Application Overview
- Sand the wood surface and remove dust (vacuum).
- Stir the adhesive thoroughly.
- Brush on 1–2 thin, even coats of ORACOVER AIR Hotmelt Adhesive.
- Allow to dry at least 10 hours (do not resand).
- Apply and shrink the ORACOVER AIR film as usual.
Productivity guide: approximately 1 tin per 1 m². Not suitable for substrates that are not resistant to organic solvents.
Secured by Stripe
Key Features
- Colour-fast - there is no 'bleeding' at the edges when ironing over seams.
-
The covering for light constructions.
Wherever minimum weight is demanded, wherever weight has to be reduced to its limits, ORACOVER® AIR is the product to be applied.
Whether indoor flyers, park flyers, blimps or airships are to be built, ORACOVER® AIR will do the covering job.
In contrast to regular ORACOVER®, ORACOVER® AIR has no adhesive layer.
The hotmelt adhesive is to be brushed onto the surface.
ORACOVER® AIR MEDIUM (approx.34 µm), for blimps and airships up to 4 m length.
RECOMMENDED ACCESSORY :
ORACOVER® AIR Hotmelt Adhesive ORACOVER AIR Adhesive (100 ml) Unstable wood fibres can become insecure and can rip off due to the weight. The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.
Our tip: For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed with ORACOVER® AIR Hotmelt Adhesive.
The ORACOVER® AIR Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood.
With that you reach an excellent three-D adhesion of the ORACOVER® AIR film with the surface.
With the ORACOVER® AIR Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.
Application of the ORACOVER® AIR Hotmelt Adhesive:
1. Sand your wood completely and remove the swarf (vacuum).
2. Stir up well the contents of the tin.
3. Apply the ORACOVER® AIR Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush.
4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand).
5. Cover your model as always with the thermal shrink fabric covering ORACOVER® AIR.
Productivity: approx. 1 tin / 1m² Unsuitable for surfaces which are not resistant to organic solvents.
ORACOVER® AIR SPECIAL THINNER If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.
Weights & Dimensions
| Shipping Weight | 0.09kg | 0.20lbs |
| Product Width | 600mm | 23.62in |
| Product Length | 2,000mm | 78.74in |
- Colour: Chrome
- Material: Polyester
Key Info:
- Brand: Oracover
- Part No: ORA321-090-002
- Barcode: 505112114475
- Material: Oracover
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.