EUR
£ GBP
$ USD
Oracover Air Outdoor 2M Trans Green (075)
Brand: Oracover
Part No: ORA321-075-002
Shadow Stock: Usually ships next day
Oracover Air Outdoor in Transparent Green (075) is a lightweight polyester covering film designed for light model aircraft and park flyers where minimum weight is essential. This ORACOVER AIR variant does not include an adhesive layer; use ORACOVER AIR Hotmelt Adhesive for application. At approximately 23 µm, it delivers a crisp, colour-fast finish without edge bleeding.
Key Features
- Colour-fast with no bleeding at seams when ironing.
- Ultra-light film for minimum weight constructions.
- No adhesive layer; apply hotmelt adhesive to the surface before covering.
- Approx. 23 µm ORACOVER AIR OUTDOOR film.
- Suggested uses: light aircraft and park flyers; also popular as a base material for model sails.
- Material: Polyester.
- Colour: Transparent Green.
- Unsuitable for surfaces not resistant to organic solvents.
Recommended Accessories
- ORACOVER AIR Hotmelt Adhesive (100 ml) – penetrates wood and bonds loose fibres for strong adhesion, helping prevent wrinkling or peeling.
- ORACOVER AIR Special Thinner – restores adhesive to brushing viscosity if it thickens in open containers.
Application Notes
- Sand wood thoroughly and remove dust.
- Stir the adhesive well.
- Brush on 1–2 thin, even coats.
- Allow to dry for at least 10 hours; do not resand.
- Cover with ORACOVER AIR using heat as usual.
Dimensions
- Length: 2,000 mm (2 m)
- Width: 600 mm
Secured by Stripe
Key Features
- Colour-fast - there is no 'bleeding' at the edges when ironing over seams.
-
The covering for light constructions.
Wherever minimum weight is demanded, wherever weight has to be reduced to its limits, ORACOVER® AIR is the product to be applied.
Whether indoor flyers, park flyers, blimps or airships are to be built, ORACOVER® AIR will do the covering job.
In contrast to regular ORACOVER®, ORACOVER® AIR has no adhesive layer.
The hotmelt adhesive is to be brushed onto the surface.
ORACOVER® AIR OUTDOOR (approx.23 µm), the best choice for more solid light aircraft, park flyers, etc. ORACOVER® AIR OUTDOOR has not only proved itself as covering film for model airplanes, but becomes more and more popular as base material for model sails.
RECOMMENDED ACCESSORY :
ORACOVER® AIR Hotmelt Adhesive ORACOVER AIR Adhesive (100 ml) Unstable wood fibres can become insecure and can rip off due to the weight.
The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.
Our tip: For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed with ORACOVER® AIR Hotmelt Adhesive.
The ORACOVER® AIR Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood. With that you reach an excellent three-D adhesion of the ORACOVER® AIR film with the surface.
With the ORACOVER® AIR Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.
Application of the ORACOVER® AIR Hotmelt Adhesive:
1. Sand your wood completely and remove the swarf (vacuum).
2. Stir up well the contents of the tin.
3. Apply the ORACOVER® AIR Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush.
4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand).
5. Cover your model as always with the thermal shrink fabric covering ORACOVER® AIR.
Productivity: approx. 1 tin / 1m² Unsuitable for surfaces which are not resistant to organic solvents.
ORACOVER® AIR SPECIAL THINNER If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.
Weights & Dimensions
| Shipping Weight | 0.09kg | 0.20lbs |
| Product Width | 600mm | 23.62in |
| Product Length | 2,000mm | 78.74in |
- Colour: Transparent Green
- Material: Polyester
Key Info:
- Brand: Oracover
- Part No: ORA321-075-002
- Barcode: 505112114493
- Material: Oracover
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.