Your Cart: $0.00

Spend $133.00 more for free shipping!

View Cart and Checkout
Free UK shipping over £100
Change currency to GBP £ GBPChange currency to EUR € EuroChange currency to USD $ USD
Oracover Air Outdoor 2M Trans L/Green (049)

Oracover Air Outdoor 2M Trans L/Green (049)

Brand: Oracover

Part No: ORA321-049-002

$36.01 RRP $37.91
Pre-Order
Request Price Match Ask a Question Write a Review

The Oracover AIR Outdoor Transparent Light Green (049) is a lightweight polyester covering film supplied as a 2,000mm x 600mm sheet (part ORA321-049-002). Designed for light constructions where minimum weight is critical, the Outdoor variant (approx. 23 µm) is ideal for more solid light aircraft and park flyers, and is also increasingly used as a base material for model sails. This AIR film has no pre-applied adhesive layer and is used with a brushed-on hotmelt adhesive.

Key Features

  • Repositionable for a second chance without colour-layer separation.
  • Colour-fast finish with no edge bleeding when ironing over seams.
  • Approx. 23 µm lightweight film for efficient weight savings.
  • No factory adhesive layer; use with ORACOVER AIR Hotmelt Adhesive.

Specifications

  • Length: 2,000mm
  • Width: 600mm
  • Material: Polyester
  • Colour: Transparent Light Green
  • Shipping Weight: 0.09kg
  • Part Number: ORA321-049-002

Recommended Accessory

ORACOVER AIR Hotmelt Adhesive: penetrates wood to bind loose fibres and promote strong three-dimensional adhesion with the AIR film. Typical productivity is approximately one tin per 1m². If the adhesive thickens in an opened container, ORACOVER AIR Special Thinner can be used to restore brushing viscosity.

Application Summary

  • Sand the wood surface thoroughly and remove dust (vacuum).
  • Stir the adhesive well.
  • Brush on 1–2 thin, even coats.
  • Allow to dry overnight (minimum 10 hours); do not re-sand.
  • Apply and shrink the ORACOVER AIR film as usual.
  • Note: Unsuitable for surfaces not resistant to organic solvents.
Free Shipping

On UK Orders over £100
Happy to Help

Helpful, friendly advice
28 Day Returns

Easy returns process
Secure Payments

Secured by Stripe

Key Features
  • Re-positioning - the only covering film giving you a second chance without fear of colour-layer separation.
  • Colour-fast - there is no 'bleeding' at the edges when ironing over seams.

  • The covering for light constructions.

    Wherever minimum weight is demanded, wherever weight has to be reduced to its limits, ORACOVER® AIR is the product to be applied.

    Whether indoor flyers, park flyers, blimps or airships are to be built, ORACOVER® AIR will do the covering job.

    In contrast to regular ORACOVER®, ORACOVER® AIR has no adhesive layer.

    The hotmelt adhesive is to be brushed onto the surface.

    ORACOVER® AIR OUTDOOR (approx.23 µm), the best choice for more solid light aircraft, park flyers, etc. ORACOVER® AIR OUTDOOR has not only proved itself as covering film for model airplanes, but becomes more and more popular as base material for model sails.

     

    RECOMMENDED ACCESSORY :

    ORACOVER® AIR Hotmelt Adhesive ORACOVER AIR Adhesive (100 ml) Unstable wood fibres can become insecure and can rip off due to the weight.

    The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.

    Our tip: For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed with ORACOVER® AIR Hotmelt Adhesive.

    The ORACOVER® AIR Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood. With that you reach an excellent three-D adhesion of the ORACOVER® AIR film with the surface.

    With the ORACOVER® AIR Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.

     

    Application of the ORACOVER® AIR Hotmelt Adhesive:

    1. Sand your wood completely and remove the swarf (vacuum).

    2. Stir up well the contents of the tin.

    3. Apply the ORACOVER® AIR Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush.

    4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand).

    5. Cover your model as always with the thermal shrink fabric covering ORACOVER® AIR.

    Productivity: approx. 1 tin / 1m² Unsuitable for surfaces which are not resistant to organic solvents.

    ORACOVER® AIR SPECIAL THINNER If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.

Weights & Dimensions
Shipping Weight 0.09kg 0.20lbs
Product Width 600mm 23.62in
Product Length 2,000mm 78.74in
  • Colour: Transparent Light Green
  • Material: Polyester


    Key Info:
    • Brand: Oracover
    • Part No: ORA321-049-002
    • Barcode: 505112114487
    • Material: Oracover
    Standard Shipping

    £3.95 to most of the UK

    Express Shipping

    £6.95 to most of the UK

    Worldwide Shipping

    Available at checkout

    Reviews
    No specific product reviews yet, why not write one?
    WRITE A REVIEW
    All reviews are subject to moderation
    No questions yet, why not ask one?
    ASK A QUESTION
    Get early access to deals and new arrivals.
    Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.

    For more in depth queries, please contact us.