Your Cart: $0.00

Spend $132.00 more for free shipping!

View Cart and Checkout
Free UK shipping over £100
Change currency to GBP £ GBPChange currency to EUR € EuroChange currency to USD $ USD
Oracover Air Outdoor 2M Trans Magenta (073)

Oracover Air Outdoor 2M Trans Magenta (073)

Brand: Oracover

Part No: ORA321-073-002

$35.74 RRP $37.62

Shadow Stock: Usually ships next day

Collect Instore
Request Price Match Ask a Question Write a Review

Oracover Air Outdoor 2m Transparent Magenta (073) is a lightweight polyester covering film for weight‑critical builds. This approx. 23 µm ORACOVER AIR Outdoor variant is colour‑fast and helps prevent edge bleeding when ironing over seams. Supplied as a 600mm x 2,000mm roll, part number ORA321-073-002. Note: ORACOVER AIR has no self‑adhesive layer and is used with ORACOVER AIR Hotmelt Adhesive.

Key Features

  • Colour‑fast finish with no bleeding at seam edges.
  • Approx. 23 µm Outdoor grade for more solid light aircraft and park flyers.
  • No adhesive layer on the film; apply ORACOVER AIR Hotmelt Adhesive to the surface.
  • Designed for minimum weight applications in light constructions.
  • Also popular as a base material for model sails.

Weights & Dimensions

  • Width: 600mm
  • Length: 2,000mm
  • Shipping weight: 0.09kg

Colour & Material

  • Colour: Transparent Magenta (073)
  • Material: Polyester

Recommended Accessory

  • ORACOVER AIR Hotmelt Adhesive (100 ml) for brushing onto the surface. It penetrates the wood, binds loose fibres and provides excellent three‑dimensional adhesion; no further pre‑treatment required.
  • ORACOVER AIR Special Thinner to restore brushing viscosity if adhesive thickens in an open container.

Application Overview

  1. Sand the wood thoroughly and remove dust (vacuum).
  2. Stir the adhesive well.
  3. Brush on 1–2 thin, even coats.
  4. Allow to dry at least 10 hours (do not resand).
  5. Iron on ORACOVER AIR as usual.

Productivity: approx. 1 tin per 1 m². Unsuitable for surfaces not resistant to organic solvents.

Free Shipping

On UK Orders over £100
Happy to Help

Helpful, friendly advice
28 Day Returns

Easy returns process
Secure Payments

Secured by Stripe

Key Features
  • Colour-fast - there is no 'bleeding' at the edges when ironing over seams.

  • The covering for light constructions.

    Wherever minimum weight is demanded, wherever weight has to be reduced to its limits, ORACOVER® AIR is the product to be applied.

    Whether indoor flyers, park flyers, blimps or airships are to be built, ORACOVER® AIR will do the covering job.

    In contrast to regular ORACOVER®, ORACOVER® AIR has no adhesive layer.

    The hotmelt adhesive is to be brushed onto the surface.

    ORACOVER® AIR OUTDOOR (approx.23 µm), the best choice for more solid light aircraft, park flyers, etc. ORACOVER® AIR OUTDOOR has not only proved itself as covering film for model airplanes, but becomes more and more popular as base material for model sails.

     

    RECOMMENDED ACCESSORY :

    ORACOVER® AIR Hotmelt Adhesive ORACOVER AIR Adhesive (100 ml) Unstable wood fibres can become insecure and can rip off due to the weight.

    The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.

    Our tip: For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed with ORACOVER® AIR Hotmelt Adhesive.

    The ORACOVER® AIR Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood. With that you reach an excellent three-D adhesion of the ORACOVER® AIR film with the surface.

    With the ORACOVER® AIR Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.

     

    Application of the ORACOVER® AIR Hotmelt Adhesive:

    1. Sand your wood completely and remove the swarf (vacuum).

    2. Stir up well the contents of the tin.

    3. Apply the ORACOVER® AIR Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush.

    4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand).

    5. Cover your model as always with the thermal shrink fabric covering ORACOVER® AIR.

    Productivity: approx. 1 tin / 1m² Unsuitable for surfaces which are not resistant to organic solvents.

    ORACOVER® AIR SPECIAL THINNER If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.

Weights & Dimensions
Shipping Weight 0.09kg 0.20lbs
Product Width 600mm 23.62in
Product Length 2,000mm 78.74in
  • Colour: Transparent Magenta
  • Material: Polyester


    Key Info:
    • Brand: Oracover
    • Part No: ORA321-073-002
    • Barcode: 5051121144918
    • Material: Oracover
    Standard Shipping

    £3.95 to most of the UK

    Express Shipping

    £6.95 to most of the UK

    Worldwide Shipping

    Available at checkout

    Reviews
    No specific product reviews yet, why not write one?
    WRITE A REVIEW
    All reviews are subject to moderation
    No questions yet, why not ask one?
    ASK A QUESTION
    Get early access to deals and new arrivals.
    Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.

    For more in depth queries, please contact us.