Your Cart: £0.00
View Cart and Checkout
Overlander XP2 40A SBEC Brushless Speed Controller ESC

Overlander XP2 40A SBEC Brushless Speed Controller ESC

Brand: Overlander

Part No: OL-2612

£30.24 RRP £32.87

Shadow Stock: Usually ships within 4-5 days

Collect Instore
Overlander XP2 40A SBEC Brushless Speed Controller ESC DESCRIPTION This series of speed controllers have high technology and perfect function. Aiming at none-hall direct current brushless motors, they can set several parameters through program card or key on ESC and are convenient to use. XP2 SBEC 40A Brushless speed controller features * Full protection feature including low voltage, over-heat, throttle signal lost, startup protection and self-check. * Compatible with most sensor less brushless motors. * Excellent startup performance, great throttle linear and quick throttle response. * Support highest motor speed 210,000RPM (2 poles), 70,000RPM (6 poles) and 35,000(12 poles). * Easy configured with program card. * System can automatically detect throttle neutral point. * 3 timing modes can match different motors. * 3 modes of start force adjustment. *Governor mode for heli * Reverse motor direction SPECIFICATION * Low resistance PCB * Input Voltage: Support 2-6 cell Li-Po, 5-18 Nimh * Continue current: 40A, (Burst max 55A 10 secs) * BEC output: 4A/5V * Dimensions: 68 x 25 x 12 mm * Weight: 42g * Blue Motor Wire 14AWG * Red and Black Battery Wire 12AWG Manufacturers recommend Servo numbers to be limited to 1 servo per 1A of BEC. At Overlander we say you should consider a separate RX pack or uprated UBEC when using 4 servos or more

  • Brand: Overlander
  • Part No: OL-2612
  • Barcode: 5060386110491
Standard Shipping

£3.95 to most of the UK

Express Shipping

£6.95 to most of the UK

Worldwide Shipping

Available at checkout

Reviews
No specific product reviews yet, why not write one?
WRITE A REVIEW
All reviews are subject to moderation
Questions & Answers
Real questions from real customers. Why not ask your own?
Overlander XP2 40A SBEC Brushless Speed Controller ESC BRAND: OVERLANDER PART NUMBER: OL-2612 Is it a deans connector or XT-60 or none ??? I cant see in the description
Jeff Smith / 12th July 2022

This would not have any connector on it.

Si @ Wheelspin Models
Hi, can you use two of the Overlander 40amp speed controllers for a twin motor set eg- Twinstar ll with two eflite brushless motors? Regards , Richard
Richard / 25th September 2018

Yes, that should work fine with a suitable Y lead setup.

Ideally however you'd use a multi channel receiver and a radio system with mixing.

Ben @ Wheelspin Models
ASK A QUESTION
Usually a few e-mails per month. We don't spam.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.

For more in depth queries, please contact us.