GBP
€ Euro
$ USD
Overlander XP2 60A SBEC Brushless Speed Controller ESC
Brand: Overlander
Part No: OL-2608
£35.87
RRP £38.99
In Stock: Usually ships same day
The Overlander XP2 60A SBEC Brushless Speed Controller (OL-2608) delivers dependable power management and smooth, linear throttle control for RC models. A 5A/5V SBEC supports modern radio systems, while comprehensive protection features and straightforward programming via a program card or the ESC key make setup simple.
Key Features
- Full protection suite: low voltage, over-heat, throttle signal loss, startup protection and self-check.
- Suggested compatibility: most sensorless brushless motors.
- Excellent startup performance with great throttle linearity and quick response.
- Supports motor speeds up to 210,000 RPM (2-pole), 70,000 RPM (6-pole) and 35,000 RPM (12-pole).
- Easy configuration via program card or ESC key, with automatic throttle neutral detection.
- Three timing modes to match different motors and three start force settings.
- Governor mode for heli and reversible motor direction.
Specifications
- Continuous current: 60A (burst max 80A for 10 seconds)
- Input voltage: 2–6 cell Li-Po or 5–18 NiMH
- BEC output: 5V / 5A (SBEC)
- PCB: Low resistance
- Dimensions: 77 x 35 x 14 mm
- Weight: 53.4 g
- Motor wire: 14AWG (blue)
- Battery wires: 12AWG (red/black)
Suggested Compatibility
- Sensorless brushless motors
- Power systems using 2–6S Li-Po or 5–18 NiMH packs
- Motor pole counts up to 12 within the stated RPM limits
BEC Guidance
- Manufacturers recommend roughly 1 servo per 1A of BEC. Consider a separate RX pack or uprated UBEC when using 4 or more servos.
Secure Payments
Secured by Stripe
Overlander XP2 60A SBEC Brushless Speed Controller ESC DESCRIPTION This series of speed controllers have high technology and perfect function. Aiming at none-hall direct current brushless motors, they can set several parameters through program card or key on ESC and are convenient to use. XP2 SBEC 60A Brushless speed controller features * Full protection feature including low voltage, over-heat, throttle signal lost, startup protection and self-check. * Compatible with most sensor less brushless motors. * Excellent startup performance, great throttle linear and quick throttle response. * Support highest motor speed 210,000RPM (2 poles), 70,000RPM (6 poles) and 35,000(12 poles). * Easy configured with program card. * System can automatically detect throttle neutral point. * 3 timing modes can match different motors. * 3 modes of start force adjustment. *Governor mode for heli * Reverse motor direction SPECIFICATION * Low resistance PCB * Input Voltage: Support 2-6 cell Li-Po, 5-18 Nimh * Continue current: 60A, (Burst max 80A 10 secs) * BEC output: 5A/5V * Dimensions: 77 x 35 x 14 mm * Weight: 53.4g * Blue Motor Wire 14AWG * Red and Black Battery Wire 12AWG Manufacturers recommend Servo numbers to be limited to 1 servo per 1A of BEC. At Overlander we say you should consider a separate RX pack or uprated UBEC when using 4 servos or more
Key Info:
Key Info:
- Brand: Overlander
- Part No: OL-2608
- Barcode: 5060386110538
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
All reviews are subject to moderation
No questions yet, why not ask one?
ASK A QUESTION
Get early access to deals and new arrivals.
Use this form to ask us a quick one sentence question about this specific product. Do not enter anything you would not like displayed on our site.
For more in depth queries, please contact us.
For more in depth queries, please contact us.