GBP
€ Euro
$ USD
RPM Front / Rear Arms For Traxxas Slash/Stampede/Rustler/Hoss 4x4 - 1 Pair - Green (Replace TRX3655)
Brand: RPM
Part No: RPM80704
In Stock: Usually ships same day
Upgrade your 1/10 Traxxas 4x4 suspension with RPM’s tough nylon A-arms in green. This RPM80704 pair includes one left and one right arm for use at the front or rear, delivering tighter tolerances and a cleaner, more precise suspension feel.
Engineered to reduce play around the hinge pins, these arms cut fore and aft movement by better than 90% while shedding weight — approximately 6.5 g lighter per arm versus Traxxas #3655X. Signature RPM styling adds 30-degree leading/trailing edges and enlarged bosses for shock and sway bar mounts. Moulded from RPM’s renowned nylon blend and backed by an industry-leading warranty, they’re designed, manufactured and produced in Southern California, USA.
Key Features
- Tightened hinge-pin tolerances to virtually eliminate slop
- Up to 90% reduction in fore/aft arm movement at inner hinge and axle carriers
- Moulded from RPM’s durable nylon blend; industry-leading warranty
- Approx. 6.5 g lighter per arm vs Traxxas #3655X
- 30-degree leading/trailing edges with large shock and sway bar bosses
- Green finish; also available in black, blue and red
Tech Notes
- Pair includes one left and one right A-arm; two packages are needed to outfit both front and rear of one vehicle
- Suggested replacement for Traxxas #3655R and #3655X
- Suggested compatibility includes 1/10 Slash 4x4, Rustler 4x4, Hoss 4x4, Stampede 4x4 and Rally 4x4; not suggested for Rally ST (see RPM #73362)
- The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening around the axle
Secured by Stripe
RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done:
We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!
We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from.
RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!
Tech Notes:
Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle.
*Weight comparison based on Traxxas #3655X.
Quick Notes:
– fits the 1:10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4
– does not fit the Rally ST (please see RPM #73362)
– each a-arm is 6.5 grams lighter than stock*!
– 2 packages needed to complete one full vehicle (front & rear)
– replaces stock Traxxas #3655R & #3655X.
Key Info:
- Brand: RPM
- Part No: RPM80704
- Barcode: 672415807040
- Fitment: Option Part
Additional Categories:
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.