USD
£ GBP
€ Euro
RPM Front / Rear Arms For Traxxas Slash/Stampede/Rustler/Hoss 4x4 - 1 Pair - Blue (Replace TRX3655)
Brand: RPM
Part No: RPM80705
In Stock: Usually ships same day
The RPM80705 Front/Rear A-Arms deliver a tough, lightweight upgrade for 1:10 Traxxas 4x4 platforms. Precision-moulded in RPM’s trademark nylon blend, these blue arms tighten hinge pin tolerances to dramatically reduce slop and fore/aft movement—by better than 90% compared to stock—while trimming approximately 6.5 g per arm versus Traxxas #3655X. With RPM’s signature 30° leading/trailing edges and oversized bosses for shocks and sway bar mounts, they offer strength, performance and clean styling backed by an industry-leading warranty.
Features
- Reduced suspension slop with tighter hinge pin tolerances
- Improved stability with over 90% reduction in fore/aft arm movement
- Approx. 6.5 g lighter per arm versus Traxxas #3655X
- Durable RPM nylon blend with RPM warranty support
- 30° leading/trailing edge design and large shock/sway bar bosses
- Colour: Blue
- Pack contents: 1 left and 1 right A-arm (pair)
Suggested Compatibility
- Traxxas Slash 4×4 (1:10)
- Traxxas Rustler 4×4 (1:10)
- Traxxas Stampede 4×4 (1:10)
- Traxxas Hoss 4×4 (1:10)
- Traxxas Rally 4×4 (1:10), not ST versions
Tech Notes
- Replaces stock Traxxas #3655R and #3655X
- Arms are sold as a pair (1 left, 1 right); two packages are needed to complete one full vehicle (front and rear)
- The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs
- Weight savings based on Traxxas #3655X
- Designed and manufactured in Southern California, USA
Secured by Stripe
RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done:
We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!
We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from.
RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!
Tech Notes:
Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle.
*Weight comparison based on Traxxas #3655X.
Quick Notes:
– fits the 1:10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4
– does not fit the Rally ST (please see RPM #73362)
– each a-arm is 6.5 grams lighter than stock*!
– 2 packages needed to complete one full vehicle (front & rear)
– replaces stock Traxxas #3655R & #3655X.
Key Info:
- Brand: RPM
- Part No: RPM80705
- Barcode: 672415807057
- Fitment: Option Part
Additional Categories:
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
Very good, tougher more flexible than stock items, last longer too!!!
WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.