Seagull P26A Peashooter (26-30cc) 1.8m (71in)
Brand: Seagull
Part No: SEA305G
Out Of Stock
Request Stock NotificationThe Seagull P26A Peashooter (SEA305G) captures the charm of the between‑wars Boeing P‑26 in a large, practical ARTF package. With a 1.8m (71in) wingspan and design provisions for 26–30cc petrol engines or glow/electric equivalents, it offers a rewarding scale experience without the complexity of retracts. Built from lightweight balsa and plywood and finished in genuine Oracover, this approximately 1/5‑scale (1:4.7) model blends authentic detailing with everyday usability for intermediate to expert pilots.
Carefully engineered features include plug‑in outer wing panels for easy transport, a removable cockpit hatch for quick radio, tank or flight battery access, and a clear screw‑on windscreen. Numerous scale touches—such as the factory‑painted fibreglass cowl and wheel spats, dummy engine and bracing wires—enhance presence in the air and on the ground. Inset flaps further broaden the flight envelope, while the included hardware supports either glow or electric power setups.
Key Features
- Lightweight, high‑quality balsa and plywood construction
- Eye‑catching scale colour scheme finished in genuine Oracover film
- Factory‑painted fibreglass engine cowl and wheel spats
- Large open cockpit encourages additional detailing
- Removable cockpit hatch for easy radio, tank or flight battery access
- Plug‑in outer wing panels simplify transport and storage
- Full hardware pack included for glow or electric power
- Numerous scale details including dummy engine and bracing wires
- Authentic inset flaps
- Crystal‑clear screw‑on windscreen
What’s In The Box
- Factory assembled and covered fuselage
- Factory assembled and covered 2‑piece wing set
- Factory assembled and covered tail set
- Clear windscreen moulding
- Pilot figure
- Factory painted glass fibre cowl
- Wheel spat set
- Comprehensive hardware pack (screws, horns, pushrods, fuel tank, etc.)
- Sprung/steerable tail wheel unit
- Oleo‑style sprung/braced undercarriage set
- Landing and flying wire kit
- Comprehensive instruction manual
Needed To Complete
- 26–30cc petrol engine, glow engine or electric equivalent
- 6‑channel (minimum) computer transmitter and receiver
- Propeller to suit chosen engine/motor
- 8 x standard‑size, digital, metal‑gear servos
Tech Specs
- Wingspan: 1,800mm / 71in
- Length: 1,580mm / 62.2in
- Wing Area: 62dm² / 965in²
- Approx. Flying Weight: 14lb
- Shipping Weight: 9.30kg / 20.51lb
- Scale: 1:4.7
- Completion Level: ARTF
- Experience Level: Intermediate / Expert
- Recommended Usage Environment: Designated R/C model flying site
- Material: Wood
Secured by Stripe
Seagull has done it again with this outstanding 1/5-scale rendition of the 'tween wars Boeing P-26 Peashooter. Famed for being the first American all-metal production fighter, the P-26 first flew in 1932 but quickly became the victim of rapid progress in aviation. Just three years after its first flight the aeroplane s wire-braced wings, fixed landing gear and open cockpit were competing with the enclosed cockpit, retract-equipped and aerodynamically clean Curtiss P-36, Messerschmitt 109 and Hawker Hurricane. But what a fabulous subject for an unusual scale R/C model.
Built to Seagull s usual high standards, beautifully covered and finished, and perfect for any 30cc petrol engine, or glow / electric equivalent, this is a model that has undeniable presence. With the four primary controls, inset flaps and no retracts to worry about, it s a practical, all-occasion flier, one that any intermediate or experienced pilot will quickly fall in love with.
Specification:
| Wingspan (in): | 71 |
| Length (in): | 62.2 |
| Wing area (sq. in): | 965 |
| All-up weight (lb): | 14 |
Seagull P26A Peashooter (26-30cc) 1.8m (71in) Tech Specs:
Seagull P26A Peashooter (26-30cc) 1.8m (71in) Key Features:
- Seagull has done it again with this outstanding 1/5-scale rendition of the 'tween wars Boeing P-26 Peashooter. Famed for being the first American all-metal production fighter, the P-26 first flew in 1932 but quickly became the victim of rapid progress in aviation. Just three years after its first flight the aeroplane s wire-braced wings, fixed landing gear and open cockpit were competing with the enclosed cockpit, retract-equipped and aerodynamically clean Curtiss P-36, Messerschmitt 109 and Hawker Hurricane. But what a fabulous subject for an unusual scale R/C model.
Built to Seagull s usual high standards, beautifully covered and finished, and perfect for any 30cc petrol engine, or glow / electric equivalent, this is a model that has undeniable presence. With the four primary controls, inset flaps and no retracts to worry about, it s a practical, all-occasion flier, one that any intermediate or experienced pilot will quickly fall in love with.
Specification:
Wingspan (in): 71 Length (in): 62.2 Wing area (sq. in): 965 All-up weight (lb): 14 - Lightweight, high quality balsa and plywood construction.
- Eye-catching scale colour scheme.
- Finished in genuine Oracover film.
- Factory painted fibreglass engine cowl and wheel spats.
- Large open cockpit encourages additional detail.
- Removable cockpit hatch for easy radio, tank or flight battery access.
- Plug-in outer wing panels simplify transportation and storage.
- Full hardware pack included for either glow or electric power.
- Numerous scale details including dummy engine and bracing wires.
- Authentic inset flaps.
- Crystal clear screw-on windscreen.
What's in the Box:
- 1x Factory assembled and covered fuselage.
- 1x Factory assembled and covered 2-piece wing set.
- 1x Factory assembled and covered tail set.
- 1x Clear windscreen moulding.
- 1x Pilot figure.
- 1x Factory painted glass fibre cowl.
- 1x Wheel spat set.
- 1x Comprehensive hardware pack (screws, horns, pushrods, fuel tank etc.).
- 1x Sprung / steerable tail wheel unit.
- 1x Oleo-style sprung / braced undercarriage set.
- 1x Landing and flying wire kit.
- 1x Comprehensive instruction manual.
Needed to Complete:
- 1 x 26 – 30cc petrol engine, glow engine or electric equivalent.
- 1 x 6-channel (minimum) computer transmitter and receiver combo.
- 1 x Propeller to suit your engine / motor.
- 8x Standard size, digital, metal gear servos.
Seagull P26A Peashooter (26-30cc) 1.8m (71in) Tech Specs:
- Approx. Flying Weight: kg / 14lbs
- Shipping Weight: 9.30kg / 20.51lbs
- Product Length: 1,580mm / 62.2in
- Product Wingspan: 1,800mm / 71in
- Product Wing Area: 62dm2 / 965in2
- Scale: 1:4.7
- Completion Level: ARTF
- Experience Level: Intermediate / Expert
- Recommended Usage Environment: Designated R/C model flying site
- Material: Wood
Key Info:
- Brand: Seagull
- Part No: SEA305G
- Barcode: 5051121263572
- Assembly Level: ARTF (Almost RTF)
- Power:
• Electric
• Petrol - Flying Style:
• Scale
• Sport
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.











