HPI Savage XL Flux V2
Brand: HPI
Part No: HPI-160095
SORRY, THIS ITEM IS DISCONTINUED AND NO LONGER AVAILABLE.
Why not contact our team to see if an alternative is available?
The Savage XL FLUX we know and love combines the awesome raw power of 6S LiPo brushless power with the stability of a long wheelbase in the legendary HPI Savage TVP monster truck package!
The colossally powerful FLUX 2200KV motor is ready for blast-off with all the power you can run through it, and the FLUX 6S-capable electronic speed controller is fully capable of up to 22.2 volts of power to let you pull off giant stunts and jaw-dropping speed.
We're now proud to present the Savage XL FLUX in a new rugged military matte green livery ready to combat any terrain, right out of the box!
The Savage XL FLUX combines the awesome raw power of 6S LiPo brushless power with the stability of a long wheelbase in the legendary Savage HPI monster truck package! The colossally powerful FLUX 2200KV motor is ready for all the power you can run through it, and the FLUX 6S-capable electronic speed controller is fully capable of up to 22.2 volts of power to let you pull off giant stunts and jaw-dropping speed. The Savage XL FLUX is packed with options and ready to rock right out of the box!
Crazy as FLUX Speed and Power
Easy plug-and-go convenience is the hallmark of electric RC trucks, and the Savage XL FLUX is no different. Just plug in two matching battery packs and you are off and running! The FLUX 6S-capable speed controller can handle massive amounts of power, and you can fit standard 2S or 3S LiPo batteries, or our extra-long #106397 2S and #107222 3S LiPo batteries designed just for the Savage FLUX line of trucks! Want to break the speed limit with your monster truck? With the Savage XL FLUX it's super-easy! You can hit 62 mph (100km/h) with the pull of a trigger!
Savage XL Design with FLUX Power
The Savage XL FLUX is based on the already awesome XL-long and XL-wide Savage XL chassis, featuring a low-mounted FLUX 2200KV motor in place of the big-block nitro engine, a powerful FLUX 6S-capable speedo in place of the fuel tank, and twin battery boxes hanging on the outside to hold a variety of battery types. The Savage XL FLUX features an XL-long wheelbase for increased stability and an even more impressive size and stance over the standard Savage. The lengthened wheelbase means extra control at high speeds for massively impressive speed runs!
HPI Savage XL Flux Features:
- Factory-assembled & pre-painted electric-powered 4WD 1/8 scale electric-powered monster truck
- Based on the legendary Savage XL monster truck
- HPI 2.4GHz radio system
- HPI 2.5mm TVP (Twin Vertical Plate) chassis with XL-long wheelbase
- HPI high torque steering servo with cam type servo saver
- HPI FLUX 6S-capable brushless ESC
- HPI FLUX 2200KV brushless motor
- 6S LiPo capability
- Big Bore silicone oil-filled shocks
- All-metal bulletproof drivetrain with 44-tooth steel spur gear
- Super heavy-duty dogbones and 17mm hex hubs
- Shock towers have multiple shock mounting positions
- Quick access to the front or rear differential
- Twin vented battery boxes with locking battery box doors
- Battery boxes fit specially designed HPI #106397 2S and
- #107222 3S extra-long life LiPo batteries
- 3mm 7075 motor plate and dual 8mm billet motor clamp
- Full set of ball bearings and hex head hardware
Secured by Stripe
- Brand: HPI
- Part No: HPI-160095
- Barcode: 5050864026321
- Scale: 1:8
- Build Level: Assembled (RTR)
- Power Source: Electric - Brushless
- Vehicle Type: Monster Truck
- Surface Type: Off Road
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
Such an iconic RC... It's an expensive truck with an old school architecture and stupid screws but you can fix all those issue later on. Crazy power, heavy and durable! When it goes 60mph next to you, it's scary.
WRITE A REVIEW
Questions & Answers
No, you need to add batteries and charger seperately, have a look at the combos we offer on the page for a few different options. You would need 2x 11.1 lipos and a charger something like these SCH-SK-100131 and SCH-CR782
This car has a battery compartment on either side of the car so is set up for 2x 3s lipos.
If you can find a 6s lipo to fit in the compartment then yes you can use 1 x 6s lipo and use a deans loop on the second connector.
It will come with the transmitter but you will need to purchase batteries and charger separately
It will come with the transmitter but you will need batteries and charger to be able to use this separately
Most of the ProLine 3.8 range would fit these no problem
Yes, we list all spares at https://wheelspinmodels.co.uk/c/1663/
Check out HPI-109083
ASK A QUESTION
For more in depth queries, please contact us.














Plazma 7.4V 5300mAh 40C LiPo Battery Pack 39.22Wh
Plazma 11.1V 5300mAh 40C LiPo Battery Pack 58.83Wh
HPI LiPo Safe Case (Black)
Battery Foam Sheet/Block Set Savage Flux etc. (4Pcs)
Battery Box Set Right & Left (Savage Flux HP)
HPI Battery Box Holder/Mount Set
Battery Tray Set
Battery Box Foam Block Set
Battery Strap Set
HPI Motor Plate (Gray/4mm)
Hex Wheel Hub 17mm (Silver) Savage X
Washer 8x10x0.2mm (10Pcs)
HPI Silicone O-Ring 5X9X2mm (10Pcs)
Cup Joint 6x13x20mm (2)
HPI M3 NyLock Nuts - Pack of 6