EUR
£ GBP
$ USD
Tamiya 190 E Evo Zakspeed TT-01E
Brand: Tamiya
Part No: HC-58638
Out Of Stock
Request Stock NotificationAdd a radio system, steering servo, batteries and charger to your new model. Note, you may also wish to choose some bodyshell paint from our range.
ET1060
SCH-EP3000S
HD-1812MG
ORI30198DNS
Saves €35.25 over RRP
Add a better specification radio system, steering servo, higher capacity battery and fast charger to your new Tamiya model. Note, you may also wish to choose some bodyshell paint from our range.
HPI-101939
ET1060
VZ0025
ET0208
SAV-SW0231MG+
Saves €41.96 over RRP
The Tamiya 190 E Evo Zakspeed TT-01E (HC-58638) is a 1/10 scale R/C assembly kit recreating the Diebels‑Alt sponsored Team Zakspeed Mercedes‑Benz 190 E 2.5‑16 Evo.II as campaigned in the 1992 DTM. The sleek silhouette is reproduced in durable polycarbonate with separate moulded details, sitting on Tamiya’s accessible and upgradeable TT‑01 Type‑E shaft‑driven 4WD chassis.
Designed for ease of building and confident on‑road handling, the TT‑01E features a bathtub frame layout with the motor and battery mounted low for a reduced centre of gravity and balanced weight distribution. A fibreglass‑reinforced nylon upper deck and gear covers add rigidity, while a 3‑piece tie rod provides smooth steering response. Double wishbone suspension at all four corners and front/rear differential gears deliver reliable traction. Gold 6‑spoke wheels paired with racing slick tyres complete the period‑correct look, and a torque‑tuned motor is included to get you started. A wide range of Tamiya Hop‑Up Options is available to further enhance performance.
Key Features
- 1/10 scale R/C model assembly kit; length 445mm, width 184mm
- DTM‑era Mercedes‑Benz 190 E 2.5‑16 Evo.II body in polycarbonate
- Separate moulded mirror, rear wing and grille parts, plus plated Mercedes‑Benz three‑star emblem
- Marking stickers included to recreate sponsor logos and race numbers
- Gold 6‑spoke wheels paired with racing slick tyres
- TT‑01 Type‑E chassis with shaft‑driven 4WD for easy, predictable handling
- Low centre of gravity layout; bathtub frame with FRN upper deck and gear covers for improved rigidity
- 3‑piece tie rod steering, 4‑wheel double wishbone suspension and front/rear differential gears
- Torque‑tuned motor included
- Wide range of Hop‑Up Options available for tuning
What’s Included
- Tamiya TT‑01 Type‑E 4WD chassis (assembly kit)
- Pre‑cut/paint‑ready polycarbonate body shell with moulded detail parts
- Marking stickers
- Tamiya torque‑tuned motor
Required To Complete
- Two‑channel radio system
- Steering servo
- 7.2V battery and compatible charger
- Tamiya PS polycarbonate paint
Secured by Stripe
Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-01 Type E entry-level on-road chassis. The TT-01E chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. In addition to the TT-01E being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance.
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower centre of gravity and optimum balance. Mounted on the bathtub frame is a fibreglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low centre of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold colour 6-spoke wheels are paired with racing slick tyres for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!
About the Model
- 1/10 scale R/C model assembly kit. Length: 445mm, width: 184mm
- The 190 E form is expertly depicted in durable polycarbonate, with separate moulded mirror, wing and grille parts, as well as a plated Mercedes-Benz 3-star emblem
- Marking stickers are included to recreate the numerous sponsor logos, car numbers, etc
- 6 spoke wheels (same design as Celica GT-Four '97 Monte-Carlo - Item 50770) are moulded in gold, and paired with slick tyres
- The TT-01 Type-E chassis features shaft-driven 4WD system which offers easy handling
- A wide range of option parts is available to tune the TT-01 Type-E chassis
- Torque-tuned motor is included
Separately Required Items
- Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint
Key Info:
- Brand: Tamiya
- Part No: HC-58638
- Barcode: 4950344065738
- Scale: 1:10
- Power Source: Electric - Brushed
- Surface Type: On Road
- Vehicle Type: Touring / Rally Car
- Build Level: Unassembled (Kit)
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.
Tamiya TT-02 Frp Batt Plt + Trsp Stay
Tamiya TT-02 Aluminium Propeller Shaft
Tamiya Front Propeller Joint
Tamiya TT-01 Aluminium Prop Joint + Shaft
Tamiya TT-02 Aluminium Propeller Joint
Tamiya Motor Plate (Ba42)
Tamiya Rein. Tires B2 24mm X 4
Tamiya 59mm Adjuster Rod (1Pcs) For 58416
Tamiya 3X10mm Flange Tapping Screw
Tamiya 4mm Adjuster 6
Tamiya Tire (W/Wheel) (4Pcs) For 57766
Tamiya Front Tyre X2 Grasshopper II
Tamiya Adjustable Upper Arm/TT-01 TGS
Tamiya TT-02 D Parts (Motor Mount)
Tamiya 1150 5 x 11 x 4mm Rubber Sealed Bearings (2 Pcs)