GBP
€ Euro
$ USD
eTronix Power Pal Peak Detect NiMh Fast Charger - Mains/12v Input
Brand: eTronix
Part No: ET0208
In Stock: Usually ships same day
ETRONIX POWERPAL PEAK CHARGER AC/DC 1/2/4 AMP
Simple and compact the PowerPal Peak is the ideal entry level charging source for Ni-Cd and Ni-MH batteries. With the option of AC/DC power supply, the Peak can be used at home, in the car or at the field. Selectable charge rates provide amp settings to suit most needs and battery capacities, whilst the peak detection software eliminates damaging over charging.
Powerpal Peak Charger Features:
- Switching transfer for low heat dissipation
- Selectable charge rate: AC 4-8 Cell: 1, 2 Amp, DC 4-7 Cell: 1, 2, 4 Amp
- 8 Bit microchip CPU controller
- Output has short circuit protection circuitry
- With LED light and beeper to indicate charging status
- Re-peak function
- Portable DC 12v car lighter adaptor for flexible charging options.
Secured by Stripe
- Brand: eTronix
- Part No: ET0208
- Barcode: 5055323952104
- Input Voltage:
• 12V
• 240V (UK mains) - Chemistry: NiMh / NiCd
- Included Connectors: Tamiya
Standard Shipping
£3.95 to most of the UK
Express Shipping
£6.95 to most of the UK
Worldwide Shipping
Available at checkout
Reviews
Great item received fast shipping and very helpful if your not sure what it is you want you get a instant reply on the questions page really great shop to buy from !!!!
Does what it says. Plugged my 5300mAH battery and it was charged in no time. Great item and just what you need when your out and about with a built in cocorite lighter charger
WRITE A REVIEW
Questions & Answers
That is not designed for that battery - I would stick to the small USB chargers for those.
Yes that will work and you would need ET0800
This charger will work with that battery yes.
I'd use 2A on the 1800 and 4A on the 4700
Yes that should work fine.
No adapter needed if your battery has a Tamiya connector
Something like ET0800 should work and convert to a servo style lead if that's what is fitted on your hump pack
Yes aslong as you have the correct connections to fit the charger.
Yes it would charge that. It would take just over an hour on the 4 amp setting
Yes that would charge the NiMh in there no issue
Yes it would.
I'd set it to 4A for that pack
Yes that would work fine on the 1 Amp charge setting.
If your battery has the red deans connector, you'd want an adapter lead such as ET0817
Yes it will charge a 1600mAh 7.2v NiMh.
If you send us a photo of your battery we can advise if you need an adapter?
Yes try SPMX22004S30 , this is the recommended one for this plane.
No this is for NiMh only
So you could charge that at the 4 Amp setting and it would take around 45 mins to charge.
No - we'd recommend a maximum of 1.2 Amp charge for that battery.
No, you can charge a partially charged pack with no issue. The charger will cut off when the pack is fully charged.
This has a normal size Tamiya plug. For mini Tamiya, we'd use adapter ET0821
Yes, this will charge the NiMh pack from the Maverick Ion / Ripmax Husky no problem - you will just need an adapter lead such as ET0821
ASK A QUESTION
For more in depth queries, please contact us.