GBP
€ Euro
$ USD
Tamiya Subaru IMPREZA Monte Carlo 99 (TT-02)
Brand: Tamiya
Part No: HC-58631
In Stock: Usually ships same day
Add a radio system, steering servo, batteries and charger to your new model. Note, you may also wish to choose some bodyshell paint from our range.
ET1060
SCH-EP3000S
HD-1812MG
ORI30198DNS
Saves £30.39 over RRP
Add a better specification radio system, steering servo, higher capacity battery and fast charger to your new Tamiya model. Note, you may also wish to choose some bodyshell paint from our range.
HPI-101939
ET1060
VZ0025
ET0208
SAV-SW0231MG+
Saves £36.18 over RRP
Tamiya’s HC-58631 recreates the iconic 1999 two-door Subaru Impreza from the Monte-Carlo season opener, capturing its rally-bred lines in durable polycarbonate. Separate parts reproduce the rear wing and side mirrors, while the included sticker sheet provides the period-correct team and sponsor logos. The body sits on Tamiya’s adaptable TT-02 shaft-driven 4WD chassis, designed for balanced handling on road and flat dirt surfaces.
The TT-02 platform places the battery longitudinally on the left and the motor on the right for stability and simple maintenance. Identical left/right suspension arms and uprights ease assembly, and the chassis offers multiple setup options including two wheelbases, two ground clearance settings, two tread configurations and a wide range of possible gear ratios. Gold colour fin-spoke wheels are paired with rally block tyres for the right look and dependable grip.
A Type 540 motor and an Electronic Speed Controller (ESC) are included, making this a solid foundation for a classic rally build. Stickers, body parts and the TT-02’s robust drivetrain round out a kit that’s as enjoyable to assemble as it is to drive.
Specifications
- Length: 442mm, Width: 186mm, Height: 140mm
- Wheelbase: 257mm
- Tyre Width/Diameter: 27/69mm (Front & Rear)
- Bathtub-type frame
- Shaft-driven 4WD
- Front/Rear 4-bevel resin differentials
- 3-piece steering tie-rod
- 4-wheel double wishbone suspension
- Front/Rear friction dampers
- Gear ratio: 9.58:1 (9 further ratios from 11.38:1 to 7.28:1 with separately sold pinions)
- Type 540 motor
- Electronic Speed Controller (ESC) included
Required to Complete
- Radio gear
- Servo
- Battery
- Charger
Secured by Stripe
Rally Legend on the TT-02
The 1999 version of the two-door Subaru Impreza rally car was a highly balanced beast, with 4-cylinder turbocharged all-aluminum boxer engine, a drive-by-wire throttle and semi-automatic 6-speed transmission. This R/C model assembly kit recreates the Impreza from the year's opening rally in Monte-Carlo, with the form faithfully depicted in durable polycarbonate, and separate parts used to recreate rear wing and side mirrors. Stickers are included to recreate the multitude of team and sponsor logos. The model runs on the adaptable TT-02 chassis, which is equally at home on road and flat dirt surfaces.
TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gold color fin-spoke wheels are paired with rally block tires.
Specifications
- Length: 442mm, Width: 186mm, Height: 140mm
- Wheelbase: 257mm
- Tire Width/Diameter: 27/69mm (Front & Rear)
- Bathtub-type Frame
- Shaft-Driven 4WD
- Front/Rear 4-Bevel Resin Differentials
- 3-Piece Steering Tie-Rod
- 4-Wheel Double Wishbone Suspension
- Front/Rear Friction Dampers
- Gear Ratio = 9.58:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions)
- Type 540 Motor
- Electronic Speed Controller (ESC) included
Requires radio gear, servo, battery and charger.
Key Info:
- Brand: Tamiya
- Part No: HC-58631
- Barcode: 4950344586318
- Scale: 1:10
- Power Source: Electric - Brushed
- Surface Type: On Road
- Vehicle Type: Touring / Rally Car
- Build Level: Unassembled (Kit)
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
Questions & Answers
These ones HC-C904055
You would need one of the combos to get everything you need, the kit on its own will not come with a servo.
They are stickers.
We do list a couple of combos on the website so if you purchsed one of those you would have everthing to get this up and running apart from paint for the body shell.
Yes these take standard 540 size motors
Afraid we don't list an upgrade screw set for these.
However a number 2 philips screwdrive should be correct for most of the screws.
The standard ESC is NOT lipo compatible, only 7.2V NI-MH
The shocks are friction NOT oil Dampened.
No, this is a Tamiya kit so requires assembly and battery/charger/radio gear to complete ( check out our combo packs for a suggested setup)
It's a kit
This is a kit build car, if you need the items to complete just choose one of the pre selected combos.
Yes this kit comes with the TBLE-02 ESC
Sorry but it's not available
That's discontinued now sorry
No, this is a Tamiya Kit so requires radio gear, battery and charger to complete. Check out our combo packs which include the necessary items.
We can't take payment online for an instore collection - however feel free to just pop in and pick one up.
ASK A QUESTION
For more in depth queries, please contact us.
Tamiya TT-02 Frp Batt Plt + Trsp Stay
Fastrax Tamiya TT-02 Graphite Battery Strap
Fastrax Tamiya TT-02 Aluminium Front/Rear Prop Shafts (2)
Tamiya TT-02 Aluminium Propeller Shaft
Tamiya TT-01 Aluminium Prop Joint + Shaft
Tamiya TT-02 SRX Aluminium Prop Jt + SS Cap
Tamiya TT-02 Aluminium Propeller Joint
Fastrax Tamiya TT-02 Aluminium /Steel Universal Driveshaft
Tamiya Toe-In Rar Upright/TT-01 TGS
Tamiya Body Mount Extension Set
Tamiya Tb-03 Spur Gear (64T)
Tamiya 3X8mm Screw X 5
Tamiya TT-02 Chassis Cover Set
Tamiya 2X10mm Shaft *10
Tamiya 3X20mm Step Screw