HOBBYWING COMBO MAX10 ESC 3652SL 4000KV MOTOR
Built with high-quality components and coupled with cutting-edge firmware, the MAX10 is able to deliver unmatched power and performance for even the most extreme racing applications, but it is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.
The MAX10 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.
The waterproof and dust-proof design allows the MAX10 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.
The built-in switch mode BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V allows the use of various high voltage servos.
When pairing the MAX10 with a Hobbywing matching motor (i.e. EzRun 3652/3660 G2 motor), the temperature sensor cable on the ESC will monitor the motor temperature and protect the motor from irreversible damage due to overheating in real time.
Hobbywing EzRun MAX10 ESC Features:
- Capacitor Thermal Protection
- High Reliability & Durability
- Super Internal BEC
- Applicable to All Weather Conditions
- Advanced and Secure Electronic Switch
- Regular Firmware Updates
Spec Check:
- Scale: 1/10th
- Brushed/Brushless: Brushless
- Sensored/Sensorless: Sensorless
- Waterproof: Yes
- Cont./Peak Current: 60A/450A
- Input: 2-3S LiPo/6-9 Cells NiMH
- BEC Output: Switch Mode 6V/7.4V,3A
- Input Wires: Red-14AWG-200mm*1/Black-14AWG-200mm*1
- Output Wires: Black-14AWG-200mm*3
- Input Connectors: No
- Output Connecotors: 3.5 Bullet Connectors (Female)
- Fan Size: 25.0x25.0x10.0mm
- Voltage Range: 5-7.4V
- Powered by BEC
- SET Button on ESC: Supported
- LED Program Box: Supported
- LCD Program Box: Supported
- WiFi Module: Supported
- Size: 39.4x32.8x23.1mm
- Weight: 67.8g
The HobbyWing EzRun 3652 G2 motor features an Innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented). It has low cogging effect and torque pulsation for improved control feel around corners. The built-in temperature sensor and sensor port protect the motor from damage due to overheating when pairing with an EzRun Max10/Max10 SCT ESC.
HobbyWing EzRun 3652 G2 4000KV SL Motor Features:
- Innovative 4-pole-8-magnet "staggered pole" rotor
- Built-in temperature sensor and sensor port
- O-ring seal fitted between the front end bell and motor case
- Special design motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws
- Special technology for temperature control for less heat and more efficiency (efficiency rate of up to 90%)
- CNC machined aluminium housing, high purity copper windings and advanced rotor structure
- Rebuild-able design for easy routine maintenance
Spec Check:
- Scale: 1/10th
- Brushed/Brushless: Brushless
- Sensored/Sensorless: Sensorless
- Pole Count: 4
- KV Rating: 4000
- LiPo Cells: 2-3S
- No-load Current(A): 5.2
- Timing: 0 Degrees(Fixed)
- O.D.(mm): 36.00
- Length (mm): 52.00
- Shaft Diameter (mm): 3.175
- Weight (g): 216
Will this be suitable for a FTX Bugsta 4wd replacement of the original brushed system?
Asked by Warren Davies on 6th January 2019
Yes, that would work OK in a Bugsta.
Answered by: Ben @ Wheelspin Models
Hi can you tell me what program card I can use with is combo.
Asked by Darren Waddup on 30th March 2019
This will work with them all, led, lcd and the wifi box for your phone. So HW30502000 HW86020020 and HW30503000
Answered by: Ben @ Wheelspin Models
Would this fit my slash 4x4 .thanks
Asked by Lee Keeley on 15th May 2019
Yes it will fit - but it's a bit high KV wise for a 4X4 SCT such as that.
Answered by: Ben @ Wheelspin Models
Would this work in a Traxxas trx4 sport as a crawler ?
Asked by James on 10th September 2019
It'll certainly fit in the TRX4 as it's standard size. It's not really a crawler system though - it's likely a bit fast. You really want a lower KV motor for lower RPM.
An ideal crawler system would be the HW AXE systems say the HW38020252 or HW38020253
Answered by: Ben @ Wheelspin Models
Would this fit/work with a traxxas rustler vxl 2wd?
Asked by Andrew Tivey on 23rd February 2020
Yes, that would work fine in that car
Answered by: Ben @ Wheelspin Models
Wondering If this would be a good fit in a Abisma AB3.4 set up or would a lower KV be better
Asked by Martin on 6th April 2020
I'd go for a lower KV in that car
Answered by: Ben @ Wheelspin Models
I’d be fitting this to a Slash vxl, is there a Traxxas adapter that I can get or would it require soldering?
Asked by Alex on 15th May 2020
These come without connectors, so you could solder on a Traxxas connector if you wish
Answered by: Ben @ Wheelspin Models
Will this combo work on my Kyosho Dodge Charger fazer mk 2.
Asked by Gregory Cale on 16th August 2020
Yes that would fit
Answered by: Ben @ Wheelspin Models
Would this be an ideal combo to upgrade a maverick Strada mt, along with a 3s battery?
Asked by Thomas James on 22nd August 2020
Yes that would work nicely in there -
Answered by: Ben @ Wheelspin Models
Would this fit on a 2WD ruckus ECX?
Asked by Hayden on 29th August 2020
Pretty sure from memory those took standard 540 size motors, so yes this should fit
Answered by: Ben @ Wheelspin Models
Does the ESC come with a battery connector fitted?
Asked by Simon Whiteman on 12th September 2020
No, you can solder on your choice of connector
Answered by: Ben @ Wheelspin Models
What’s a good 3s LiPo battery to use with this
Asked by Hayden Curtis on 16th October 2020
Depends more on your vehicle, but something like VZ0341 would fit most cars
Answered by: Ben @ Wheelspin Models
Would this fit a traxxas slash 2wd
Asked by Joshua Molloy on 7th November 2020
Yes that would fit
Answered by: Ben @ Wheelspin Models
Would this be suitable for upgrading a Typhon Mega 4x4 to brushless?
Asked by Jonathan on 9th November 2020
Yes, that would work well in there.
Answered by: Ben @ Wheelspin Models
Hi Ben, would this setup be suitable for Tamiya Zahhak buggy or would the 3300kv be better suited? It will be mainly run on 2s, thanks.
Asked by Dom on 3rd December 2020
Either would work, but I'd say the 3300kv may be better suited
Answered by: Ben @ Wheelspin Models
Would this be suitable for a v2 granite?
Asked by Cliff on 2nd January 2021
I'd probably go for the HW38010200 or HW38010203 over this in the granite
Answered by: Ben @ Wheelspin Models
Do I need to do any Soldiering on this?
Asked by Andy Joyce on 1st February 2021
Yes you'd need to solder together motor and ESC
Answered by: Ben @ Wheelspin Models
Have you a brushless motor combo that can run on NiMH batteries?
Cheers Ian
Asked by Ian Thompson on 2nd February 2021
These would still run on NiMh - but you will get better performance on LiPo
Answered by: Ben @ Wheelspin Models
Hi would this fit a arrma limitless if fitted with a 5 mm motor adapter as a starter thanks Nigel
Asked by Nigel on 28th February 2021
You'd want something bigger in the limitless - MAX8 or even MAX6
Answered by: Ben @ Wheelspin Models
Would this fit in a tamyia tt-01
Asked by Lewis Paul on 17th March 2021
Yes that would fit - they are standard 540 size
Answered by: Ben @ Wheelspin Models
Can this take a 11. V battery
Asked by Shaun Tipson on 22nd March 2021
Yes, but it would need to be in a lightweight vehicle and geared appropriately.
For 3S, you'd be better with say HW38010203 or HW38010200
Answered by: Ben @ Wheelspin Models
What battery would you recommend
Asked by Mark on 14th April 2021
Any good 2S lipo would work well - eg say VZ0317
Answered by: Ben @ Wheelspin Models
Hi what connectors are on the ESC as I have Dean's on my batterys . Thanks
Asked by Iain Ratcliffe on 28th April 2021
There are no connectors on these so you can solder on a deans if required
Answered by: Ben @ Wheelspin Models
Hi
Can I ask if the price is correct for this item please.
Regards
Kev
Asked by Kevin on 15th July 2021
Yes, pricing looks to be correct on these
Answered by: Ben @ Wheelspin Models
Would this be suited well to a tamiya TT02 with metal ball bearings and hop up diffs.
Asked by Ian on 25th March 2022
This would go in that car yes, but we woulod not normally advise a motor and esc this powerfull for that car as it is a basic car.
Answered by: Si @ Wheelspin Models
would this fit in my ftx carnage
Asked by Sam Evans on 27th April 2022
It would fit yes but we would recommend the 3300KV version for an off road car HW38010203
Answered by: Si @ Wheelspin Models
Will this work in a Rc hobao hyper H4E
Asked by Jack on 20th May 2022
Yes this would work in that car for you.
Answered by: Si @ Wheelspin Models
Hello,would this combo be suitable savage xs flux?thanks
Asked by Colin Doyle on 23rd June 2022
Yes this would fit that car for you.
Answered by: Si @ Wheelspin Models
Will this combo be ok in a Tamiya Super Avante?
Asked by Mark on 25th June 2022
It woul;d fit but we would not recomend this one for a Tamiya kit, we would look at the lower KV 3300 version # HW38010203
Answered by: Si @ Wheelspin Models
Would this be suitable in Tamiya Xv 01? If not what would be more suitable?
Asked by Matthew on 28th June 2022
This would work with that car but the KV rating is a little high for what we would recommend for a Tamiya car, try looking at the 3300kv version. HW38010203
Answered by: Si @ Wheelspin Models
We have 10x TT02b 1/10th buggies at our school RCCar club and wish to change them over to a new motor speed controller set up. I was looking at the Hobbywing Max 10 combo, would this be suitable or would you recommend an alternative?
Asked by Jeremy Sandford on 12th July 2022
Yes that would work well.
Answered by: Steve W @ Wheelspin Models
please can you physically check if this comes with an xt60 battery connector already fitted? Seems to elsewhere but your listing states no connector?
Many thanks!
Ewan
:)
Asked by Ewan on 8th December 2022
Yes these come with xt60 connectors on them.
Answered by: Steve @ Wheelspin Models
hi is it possible to buy this combo with a traxxas plug fitted
Asked by Jonathan on 26th December 2022
No they come with xt60 only.
Answered by: Steve @ Wheelspin Models
