Seagull Madness GR-7 (20cc) 1.8m (70.9in)
Brand: Seagull
Part No: SEA168F1
Out Of Stock
Request Stock NotificationThe Seagull Madness GR-7 (20cc) 1.8m pays homage to the Boyd-Grove GR-7 Panther air racer, bringing the striking Steve Temple 'Madness' scheme to an updated 71in ARTF. Drawing on the type's Formula 1 pedigree, this sleek, low-drag model delivers the "on rails" tracking, smooth handling and confidence-inspiring performance that racer fans appreciate.
Beautifully built from lightweight balsa and plywood, the airframe is finished in genuine Oracover and features plug-in wing panels for easy transport. A removable cockpit hatch offers straightforward access to your radio gear, fuel tank or flight battery, while a factory-painted fibreglass cowl and wheel spats complete the scale look. Suitable for either i.c. or electric powerplants, the GR-7 arrives with a comprehensive hardware pack to support your chosen setup. Seagull part number SEA168F1.
Key Features
- Lightweight, high-quality balsa and plywood construction.
- Eye-catching scale colour scheme inspired by 'Madness'.
- Finished in genuine Oracover film.
- Factory painted fibreglass engine cowl and wheel spats.
- Removable cockpit hatch for easy access to radio, tank or flight battery.
- Plug-in wing panels simplify transport and storage.
- Full hardware pack included for either glow or electric power.
- Crystal-clear moulded canopy.
- Sturdy fixed undercarriage.
- Suitable for both i.c. and electric powerplants.
What's In The Box
- Factory assembled and covered fuselage.
- Factory assembled and covered 2-piece wing set.
- Factory assembled and covered tail set.
- Pilot figure.
- Factory painted glass fibre cowl.
- Wheel spat set.
- Comprehensive hardware pack (screws, horns, pushrods, fuel tank etc.).
- Steerable tail wheel unit.
- Oleo-style sprung / braced undercarriage set.
- Comprehensive instruction manual.
Needed To Complete
- 15–20cc petrol engine, glow engine or electric equivalent.
- 6-channel (minimum) computer transmitter and receiver combo.
- Propeller to suit your engine / motor.
- 5x standard size, digital, metal gear servos.
Tech Specs
- Weight: 3200g / 112.88oz
- Shipping Weight: 5.10kg / 11.25lbs
- Product Length: 1,190mm / 47in
- Product Wingspan: 1,800mm / 71in
- Product Wing Area: 37.61dm2 / 583in2
- Completion Level: ARTF
- Experience Level: Intermediate / Expert
- Recommended Usage Environment: Designated R/C model flying site
- Material: Wood
Secured by Stripe
The Boyd-Grove GR-7 Panther 'Madness started its Formula 1 air racing life back in 1989 as #96 'Blue Streak when, a year after it was issued with its certificate of airworthiness, it qualified in 1st place with an average speed of 242.55mph. It was the start of an illustrious career that, over the next 14 years brought it varying degrees of success, until 2003 when, piloted by Steve Temple, it appeared as #87 'Madness . A win was on the cards in 2007 and successive victories followed in various heats until, in September 2017, it raced as #22 'Hysteria piloted by Lio Mougell. Perhaps the most attractive colour scheme of its glittering career is that which Steve Temple brought to the party and which Seagull has adopted for this updated (20cc) version of the 71 span racer. Sleek, slippery and silky-smooth in flight it does what all racers do best - flies as if it s on rails, goes like an express train and inspires total confidence. Suitable for both i.c. and electric powerplants, beautifully wrapped in Oracover film and sporting plug-in wing panels, you re going to adore its appearance, convenience and exemplary flying characteristics.
Seagull Madness GR-7 (20cc) 1.8m (70.9in) Key Features:
- The Boyd-Grove GR-7 Panther 'Madness started its Formula 1 air racing life back in 1989 as #96 'Blue Streak when, a year after it was issued with its certificate of airworthiness, it qualified in 1st place with an average speed of 242.55mph. It was the start of an illustrious career that, over the next 14 years brought it varying degrees of success, until 2003 when, piloted by Steve Temple, it appeared as #87 'Madness . A win was on the cards in 2007 and successive victories followed in various heats until, in September 2017, it raced as #22 'Hysteria piloted by Lio Mougell. Perhaps the most attractive colour scheme of its glittering career is that which Steve Temple brought to the party and which Seagull has adopted for this updated (20cc) version of the 71 span racer. Sleek, slippery and silky-smooth in flight it does what all racers do best - flies as if it s on rails, goes like an express train and inspires total confidence. Suitable for both i.c. and electric powerplants, beautifully wrapped in Oracover film and sporting plug-in wing panels, you re going to adore its appearance, convenience and exemplary flying characteristics.
- The Boyd-Grove GR-7 Panther 'Madness started its Formula 1 air racing life back in 1989 as #96 'Blue Streak when, a year after it was issued with its certificate of airworthiness, it qualified in 1st place with an average speed of 242.55mph. It was the start of an illustrious career that, over the next 14 years brought it varying degrees of success, until 2003 when, piloted by Steve Temple, it appeared as #87 'Madness . A win was on the cards in 2007 and successive victories followed in various heats until, in September 2017, it raced as #22 'Hysteria piloted by Lio Mougell. Perhaps the most attractive colour scheme of its glittering career is that which Steve Temple brought to the party and which Seagull has adopted for this updated (20cc) version of the 71 span racer. Sleek, slippery and silky-smooth in flight it does what all racers do best flies as if it s on rails, goes like an express train and inspires total confidence. Suitable for both i.c. and electric powerplants, beautifully wrapped in Oracover film and sporting plug-in wing panels, you re going to adore its appearance, convenience and exemplary flying characteristics.
- Lightweight, high quality balsa and plywood construction.
- Eye-catching scale colour scheme.
- Finished in genuine Oracover film.
- Factory painted fibreglass engine cowl and wheel spats.
- Removable cockpit hatch for easy access to radio, tank or flight battery.
- Plug-in wing panels simplify transportation and storage.
- Full hardware pack included for either glow or electric power.
- Crystal clear moulded canopy.
- Sturdy fixed undercarriage.
What's in the Box:
- 1x Factory assembled and covered fuselage.
- 1x Factory assembled and covered 2-piece wing set.
- 1x Factory assembled and covered tail set.
- 1x Pilot figure.
- 1x Factory painted glass fibre cowl.
- 1x Wheel spat set.
- 1x Comprehensive hardware pack (screws, horns, pushrods, fuel tank etc.).
- 1x Steerable tail wheel unit.
- 1x Oleo-style sprung / braced undercarriage set.
- 1x Comprehensive instruction manual.
Needed to Complete:
- 1 x 15 – 20cc petrol engine, glow engine or electric equivalent.
- 1 x 6-channel (minimum) computer transmitter and receiver combo.
- 1 x Propeller to suit your engine / motor.
- 5x Standard size, digital, metal gear servos.
Seagull Madness GR-7 (20cc) 1.8m (70.9in) Tech Specs:
- Weight: 3200g / 112.88oz
- Shipping Weight: 5.10kg / 11.25lbs
- Product Length: 1,190mm / 47in
- Product Wingspan: 1,800mm / 71in
- Product Wing Area: 37.61dm2 / 583in2
- Completion Level: ARTF
- Experience Level: Intermediate / Expert
- Recommended Usage Environment: Designated R/C model flying site
- Material: Wood
Key Info:
- Brand: Seagull
- Part No: SEA168F1
- Barcode: 5051121263558
- Assembly Level: ARTF (Almost RTF)
- Power:
• Electric
• Petrol - Flying Style:
• Scale
• Sport
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.







