Seagull Reno YAK 11 Reno Racer (Czech Mate) 1.8m (71in) 35cc with Electric Retracts - Pearl Blue / Chrome
Brand: Seagull
Part No: SEA302NCG
Out Of Stock
Request Stock NotificationThe Seagull Reno YAK 11 Reno Racer (Czech Mate) brings the spirit of unlimited-class pylon racing to your club field. Built from high-quality, laser-cut balsa and ply and finished in genuine Oracover, this 1.8m (71in) ARTF warbird features a striking Pearl Blue/Chrome scheme and comes complete with electric retracts. With a scale outline, factory-painted fibreglass cowl, instrument panel and a lightweight pilot, the SEA302NCG is a head-turning racer that’s practical at the field thanks to plug-in wings and a large top hatch for easy access.
Key Features
- High-quality laser-cut balsa and ply construction with accurate scale outline.
- Finished in genuine Oracover with a striking Reno race scheme.
- Plug-in wing panels for quick field assembly.
- Factory-painted fibreglass cowl and lightweight painted pilot figure.
- Large top hatch for straightforward battery and radio access.
- Split recessed flaps for confident approaches and landings.
- Comprehensive hardware pack included.
- Suitable for electric or i.c. power installations.
Power And Radio Setup
- Petrol/glow: 30–35cc petrol engine or glow equivalent.
- Electric: Seagull’s motor mounting kit supports a 110-size outrunner on 8–9S LiPo, with around 2000W suggested.
- Servos required: 7 total — aileron (2), elevator (1), rudder (1), throttle (1), flaps (2).
What's In The Box
- 1x Factory assembled and covered fuselage.
- 1x Factory assembled and covered wing set.
- 1x Factory assembled and covered tail set.
- 1x Electric retractable undercarriage set.
- 1x Crystal clear canopy moulding.
- 1x Factory painted glass fibre cowl.
- 1x Tubular wing joiner.
- 1x Pre-painted pilot figure.
- 1x Comprehensive hardware pack (screws, horns, fuel tank etc.).
- 1x Colour-coordinated spinner.
- 1x Electric power conversion kit.
- 1x Sprung / steerable tail wheel unit.
- 1x Comprehensive instruction manual.
Needed To Complete
- 1x 30 – 35cc petrol engine, glow engine or electric equivalent.
- 1x 8-channel (minimum) computer transmitter and receiver combo.
- 1x Propeller to suit your engine / motor.
- 7x Standard size, digital, metal gear servos.
Technical Specifications
- Wingspan: 1,800mm / 71in
- Length: 1,388mm / 54.6in
- Wing Area: 55dm² / 850in²
- Approx. Flying Weight: 6kg / 13.2lb
- Shipping Weight: 8.10kg / 17.86lb
- Completion Level: ARTF
- Experience Level: Intermediate / Advanced
- Recommended Usage Environment: Designated R/C model flying site
- Material: Wood
- Colour: Pearl Blue / Chrome
- Part Number: SEA302NCG
Secured by Stripe
If you crave the sight and sound of the unlimited class racers tearing round the pylons at the annual Reno gathering in the US then you'll adore Seagull's Yak-11. Based on one of the many heavily-modified racers that began life as a Yakovlev Yak-11 training aircraft (circa 1945), Seagull's model is built using high-quality, laser-cut balsa and ply to provide an accurate scale outline. Plug-in wings make for easy assembly at the field whilst a factory-applied Oracover scheme accurately represents the full-size aircraft. Add a beautiful matching cowl, instrument panel and painted pilot and you've a model that's guaranteed to turn heads. But that's not the half of it! A large top hatch provides access to a very roomy interior, a combination that's sure to find favour with those who prefer electric power. In that respect Seagull provides its customary motor mounting kit and suggests a 110-size outrunner and 8 or 9 LiPo cells, sufficient to generate some 2000 watts of power. The model requires 7 servos in the following locations: Aileron (2), elevator (1), rudder (1), throttle (1), flap (2).
Seagull Reno YAK 11 Reno Racer (Czech Mate) 1.8m (71in) 35cc with Electric Retracts - Pearl Blue / Chrome Key Features:
- If you crave the sight and sound of the unlimited class racers tearing round the pylons at the annual Reno gathering in the US then you'll adore Seagull's Yak-11. Based on one of the many heavily-modified racers that began life as a Yakovlev Yak-11 training aircraft (circa 1945), Seagull's model is built using high-quality, laser-cut balsa and ply to provide an accurate scale outline. Plug-in wings make for easy assembly at the field whilst a factory-applied Oracover scheme accurately represents the full-size aircraft. Add a beautiful matching cowl, instrument panel and painted pilot and you've a model that's guaranteed to turn heads. But that's not the half of it! A large top hatch provides access to a very roomy interior, a combination that's sure to find favour with those who prefer electric power. In that respect Seagull provides its customary motor mounting kit and suggests a 110-size outrunner and 8 or 9 LiPo cells, sufficient to generate some 2000 watts of power. The model requires 7 servos in the following locations: Aileron (2), elevator (1), rudder (1), throttle (1), flap (2).
- High quality laser-cut balsa and ply assembly.
- Finished in genuine Oracover.
- Suitable for electric or i.c. power.
- Comprehensive hardware pack included.
- Lightweight painted pilot figure.
- Striking Reno race scheme.
- Factory painted fibreglass cowl.
- Large top hatch allows easy access to radio and battery.
- Split recessed flaps.
What's in the Box:
- 1x Factory assembled and covered fuselage.
- 1x Factory assembled and covered wing set.
- 1x Factory assembled and covered tail set.
- 1x Electric retractable undercarriage set.
- 1x Crystal clear canopy moulding.
- 1x Factory painted glass fibre cowl.
- 1x Tubular wing joiner.
- 1x Pre-painted pilot figure.
- 1x Comprehensive hardware pack (screws, horns, fuel tank etc.).
- 1x Colour-coordinated spinner.
- 1x Electric power conversion kit.
- 1x Sprung / steerable tail wheel unit.
- 1x Comprehensive instruction manual.
Needed to Complete:
- 1x 30 – 35cc petrol engine, glow engine or electric equivalent.
- 1x 8-channel (minimum) computer transmitter and receiver combo.
- 1x Propeller to suit your engine / motor.
- 7x Standard size, digital, metal gear servos.
Seagull Reno YAK 11 Reno Racer (Czech Mate) 1.8m (71in) 35cc with Electric Retracts - Pearl Blue / Chrome Tech Specs:
- Approx. Flying Weight: 6kg / 13.2lbs
- Shipping Weight: 8.10kg / 17.86lbs
- Product Length: 1,388mm / 54.6in
- Product Wingspan: 1,800mm / 71in
- Product Wing Area: 55dm2 / 850in2
- Completion Level: ARTF
- Experience Level: Intermediate / Advanced
- Recommended Usage Environment: Designted R/C model flying site
- Colour: Pearl Blue
- Material: Wood
Key Info:
- Brand: Seagull
- Part No: SEA302NCG
- Barcode: 5051121261400
- Assembly Level: ARTF (Almost RTF)
- Power:
• Electric
• Petrol - Flying Style: Scale
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
ASK A QUESTION
For more in depth queries, please contact us.