Seagull DHC-1 Chipmunk 1:5 Scale 2.0m SEA-304G
Brand: Seagull
Part No: 5500033
Usually ships next day
Save with a Combo Package
Our recommended kit, bundled at a combined priceYou May Also Need
Add-ons and accessories that go with the Seagull SEA-304G DHC-1 Chipmunk 1:5 Scale 2.0m (80in) (20cc) - Green
Description
The Seagull DHC-1 Chipmunk 1:5 Scale 2.0m (80in) (20cc) - Green, part number SEA-304G, is a 1:5 scale radio-controlled model aircraft with a 2.0m wingspan. This flap-equipped, five-channel Chipmunk reproduces the green Army Air Corps training scheme associated with the full-size aircraft. Its fixed undercarriage and scale profile make it suitable as an introduction to scale flying, while the 20cc power requirement provides a clear starting point for completion.
The airframe uses balsa and plywood construction with genuine Oracover film covering. A factory-painted fibreglass engine cowl and undercarriage leg fairings complement the semi-detailed cockpit, painted pilot figures and clear screw-on canopy. The supplied hardware supports either a 20cc two-stroke engine or an electric power system, with a removable forward hatch providing access to the radio equipment and flight battery area.
For transport and field assembly, the wing is supplied as two plug-in panels retained by a single screw. The model includes a steerable tail wheel, sprung fixed undercarriage, flaps and LED landing lights for the leg fairings. The included electric conversion hardware allows the power system to be selected around the intended installation, while the comprehensive hardware pack provides the listed screws, horns, pushrods and fuel tank.
Specifications
- Wingspan: 2,032mm (80in)
- Length: 1,452mm
- Wing area: 61dm² (937.75in²)
- Shipping weight: 7.49kg (16.52lb)
What's Included
- Factory assembled and covered fuselage
- Factory assembled and covered two-piece wing set
- Factory assembled and covered tail set with clear canopy
- Two painted pilot figures
- Painted fibreglass cowl and undercarriage leg fairings
- Hardware pack and electric conversion kit
- Steerable tail wheel and sprung undercarriage set
- Two wheels, instruction manual and two LED landing lights
Required to Complete
- 20cc two-stroke engine or electric equivalent
- Minimum five-channel transmitter and receiver combination
- Seven standard-size digital metal-gear servos
- Propeller suited to the selected engine or motor
Secured by Stripe
Seagull SEA-304G DHC-1 Chipmunk 1:5 Scale 2.0m (80in) (20cc) - Green Manuals & Guides
Specifications
Just like Piper Cubs and P-51 Mustangs, Chipmunks always fly splendidly well and this Seagull version, you’ll be encouraged to hear, is no different. Like the famous Tiger Moth that it replaced in the immediate post-war years, de Havilland Canada’s new primary trainer was sold in huge numbers to numerous military air services not least our own Royal Air Force, the Royal Canadian Air Force and the Army Air Corps, who adopted this rather unusual camo' training scheme that's been beautifully reproduced on Seagull’s impressive 80” span version. Its size, presence in the air and fixed undercarriage simplicity make this flap-equipped 5-channel model the perfect introduction to scale flying and, just like the full-size, an ideal stepping stone to a fully-fledged full-house warbird.
Open the box and you’ll smile, not just at the way the model is presented and packaged but at the quality that oozes from the beautifully applied covering, the gorgeous pre-painted cowl, semi-detailed cockpit and, most importantly, the general fit, finish and build quality. It’s a cracking model and, best of all, it’s removable top hatch makes it perfect for an electric set-up whilst offering unhindered access to the fuel tank and radio bay. Moreover, the simple, single screw wing panel retention method makes transport and field assembly an absolute breeze. What a beauty. What a temptation.
Specification:
| Wingspan (mm): | 2032 (80in) |
| Length (mm): | 1452 |
| Total surface area (sq. in): | 938 |
| Weight (lb): | 10.4 |
Seagull SEA-304G DHC-1 Chipmunk 1:5 Scale 2.0m (80in) (20cc) - Green Tech Specs:
Seagull SEA-304G DHC-1 Chipmunk 1:5 Scale 2.0m (80in) (20cc) - Green Key Features:
- Just like Piper Cubs and P-51 Mustangs, Chipmunks always fly splendidly well and this Seagull version, you ll be encouraged to hear, is no different. Like the famous Tiger Moth that it replaced in the immediate post-war years, de Havilland Canada s new primary trainer was sold in huge numbers to numerous military air services not least our own Royal Air Force, the Royal Canadian Air Force and the Army Air Corps, who adopted this rather unusual camo' training scheme that's been beautifully reproduced on Seagull s impressive 80 span version. Its size, presence in the air and fixed undercarriage simplicity make this flap-equipped 5-channel model the perfect introduction to scale flying and, just like the full-size, an ideal stepping stone to a fully-fledged full-house warbird.
Open the box and you ll smile, not just at the way the model is presented and packaged but at the quality that oozes from the beautifully applied covering, the gorgeous pre-painted cowl, semi-detailed cockpit and, most importantly, the general fit, finish and build quality. It s a cracking model and, best of all, it s removable top hatch makes it perfect for an electric set-up whilst offering unhindered access to the fuel tank and radio bay. Moreover, the simple, single screw wing panel retention method makes transport and field assembly an absolute breeze. What a beauty. What a temptation.
Specification:
Wingspan (mm): 2032 (80in) Length (mm): 1452 Total surface area (sq. in): 938 Weight (lb): 10.4 - Lightweight, high quality balsa and plywood construction.
- Eye-catching scale (WP964) Army Air Corps colour scheme.
- Covered in genuine Oracover film.
- Factory painted fibreglass engine cowl and u/c leg fairings.
- Cockpit detailing with lightweight painted pilots.
- Removable forward hatch for easy radio and flight battery access.
- Superb flying characteristics.
- Plug-in wing panels simplify transportation and field assembly.
- Full hardware pack included for either glow or electric power.
- Accurate profile makes it the perfect introduction to scale flying.
- Rugged, sprung, fixed undercarriage.
- Flap-equipped.
- Crystal clear screw-on canopy moulding.
- Steerable tail wheel.
What's in the Box:
- 1x Factory assembled and covered fuselage.
- 1x Factory assembled and covered 2-piece wing set.
- 1x Factory assembled and covered tail set.
- 1x Clear canopy moulding.
- 2x Pilot figures.
- 1x Factory painted glass fibre cowl.
- 1x Factory painted glass fibre u/c leg fairing set.
- 1x Comprehensive hardware pack (screws, horns, pushrods, fuel tank etc.).
- 1x Electric conversion hardware kit.
- 1x Steerable tail wheel unit.
- 1x Rugged oleo-style sprung undercarriage set.
- 2x Lightweight wheels.
- 1x Comprehensive instruction manual.
- 2x LED landing lights for the leg fairings.
Needed to Complete:
- 1 x 20cc two-stroke engine or electric equivalent.
- 1 x 5-channel (minimum) transmitter and receiver combo.
- 7 x Standard-size, digital, high torque, metal gear servos.
- 1 x Propeller to suit chosen engine / motor.
Seagull SEA-304G DHC-1 Chipmunk 1:5 Scale 2.0m (80in) (20cc) - Green Tech Specs:
- Shipping Weight: 7.49kg / 16.52lbs
- Product Length: 1,452mm / 57.17in
- Product Wing Area: 61dm2 / 937.75in2
- Colour: Green
- Material: Wood
Key Info:
- Brand: Seagull
- Part No: 5500033
- Barcode: 5051121223910
- Assembly Level: ARTF (Almost RTF)
- Power: Petrol
- Flying Style: Scale
Delivery & Returns
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Customer Reviews
No specific product reviews yet, why not write one?Questions & Answers
Something like RCGF20RE would be ideal for these
For more in depth queries, please contact us.


































