Tamiya VW Beetle Rally (MF-01X)
Brand: Tamiya
Part No: HC-58650
Shadow Stock: Usually ships next day
Add a radio system, steering servo, batteries and charger to your new model. Note, you may also wish to choose some bodyshell paint from our range.
ET1060
SCH-EP3000S
HD-1812MG
ORI30198DNS
Saves £27.54 over RRP
Add a better specification radio system, steering servo, higher capacity battery and fast charger to your new Tamiya model. Note, you may also wish to choose some bodyshell paint from our range.
HPI-101939
ET1060
VZ0025
ET0208
SAV-SW0231MG+
Saves £33.33 over RRP
The Tamiya VW Beetle Rally (MF-01X) is an R/C model assembly kit inspired by historic rallying Beetles, pairing iconic looks with surefooted 4WD performance. Its lightweight polycarbonate body captures the classic curves of the Volkswagen Beetle, complemented by metal-plated bumpers and mirrors. Stickers and light pod parts add an authentic rally flavour. This kit is supplied under part number HC-58650 from Tamiya.
Key Features
- Compact MF-01X shaft-driven 4WD chassis designed for on-road and flat dirt use
- Rear-mounted motor with gear-driven rear wheels and propeller shaft to the front
- Front and rear differential gears for balanced traction
- 4-wheel independent double wishbone suspension with friction dampers
- Rally block tyres for grip on slippery surfaces
- Off-road capable M-05Ra uprights and hub carriers
- Lightweight polycarbonate Beetle body with metal-plated bumpers and side mirrors
- Rally-inspired light pod parts and sticker set included
- Battery mounted centrally for balanced handling
- Uses the MF-01X L wheelbase (239mm)
Specifications
- Length: 397mm, Width: 163mm, Height: 151mm
- Wheelbase: 239mm (L)
- Tyre width/diameter (F/R): 26/60mm
- Tread (F/R): 138mm
- Monocoque frame
- Shaft-driven 4WD
- 3-bevel differential gears
- 2-piece steering tie-rod
- 4-wheel double wishbone suspension
- Front & rear friction dampers
- Gear ratio: 9.5:1
- Type 540 motor
- Electronic Speed Controller
Separately Required Items
- 2-channel R/C unit
- Battery pack & charger
- R6/AA/UM3 batteries for transmitter
Secured by Stripe
Bug Rally!
Production of the Volkswagen Beetle (Type 1) began in 1949 and thanks to its distinctive rounded form with no-frills interior, it became a familiar sight across the world. Powered by a rear-mounted flat 4 engine, the lightweight Beetle offered superlative reliability and uncomplicated upkeep, which helped make the car a fixture on the global rally circuit from the 1950s through to the 1980s. This R/C model assembly kit is inspired by such rallying Beetles. Its lightweight polycarbonate body artfully captures the Beetle form, with metal-plated parts recreating bumpers and side mirrors. Stickers and light pod parts give the model a rallying air.
MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers, plus rally block tires are also included.
- Left: The MF-01X chassis offers three different wheelbases. This model uses the L (239mm) setup.
- Right: Power from the rear-mounted motor is provided by gear to the rear diff, and propeller shaft to the front.
- Left: 4-wheel independent double wishbone suspension is cushioned by friction dampers.
- Right: Rally block tires are on hand to provide great grip, even on potentially slippery dirt surfaces.
Specifications
- Length: 397mm, Width: 163mm, Height: 151mm
- Wheelbase: 239mm (L)
- Tire Width/Diameter (Front & Rear): 26/60mm
- Tread (Front & Rear): 138mm
- Monocoque Frame
- Shaft-Driven 4WD
- 3-Bevel Differential Gears
- 2-Piece Steering Tie-Rod
- 4-Wheel Double Wishbone Suspension
- Front & Rear Friction Dampers
- Gear Ratio = 9.5:1
- Type 540 Motor
- Electronic Speed Controller
Separately Required Items
- 2-Channel R/C Unit
- Battery Pack & Charger
- R6/AA/UM3 batteries for transmitter
Key Info:
- Brand: Tamiya
- Part No: HC-58650
- Barcode: 4950344065806
- Scale: 1:10
- Power Source: Electric - Brushed
- Surface Type: Off Road
- Vehicle Type: Touring / Rally Car
- Build Level: Unassembled (Kit)
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
Questions & Answers
Sorry for the typo, ESC is included in the kit
You can use Tamiya PS colours: https://wheelspinmodels.co.uk/c/106/
No, the choice of servo won't affect the receiver binding.
That will work well in that kit.
You can certainly look at upgrading the motor. The Tamiya Sport Tuned 53068 motor is popular.
After that, you can upgrade the motor and ESC together for more speed or look at a brushlesss setup such as say 2120002
ASK A QUESTION
For more in depth queries, please contact us.








Tamiya Prop Shaft Medium For Mf01X(Escort)
Tamiya Mf-01X S Prop Shaft
Tamiya Mf-01X L Prop Shaft
Tamiya TL-01 G Parts (Gear)
Tamiya 3X32mm Screw Pin (4Pcs)
Tamiya 3X14mm Step Tapping Screw *5
Tamiya 4mm Flange Lock Nut (4Pcs)
Tamiya 16T 17T Av Pinion Gear
Tamiya 06 H Coated Aluminium Pinion 22T
Tamiya G/Box Joint X 2 For Tns Was 9804284
Tamiya Mf-01X Aluminium Motor Mount
Tamiya 3mm O Rings (9805240) - Pack of 10
Tamiya Motor Plate (Ba42)
Tamiya Mf-01X A Parts (Chassis)
Tamiya M-05 Ball Diff Set