GBP
Seagull Sport Trainer V2 Low Wing Model SEA10N
Brand: Seagull
Part No: SEA10N
Usually ships same day
Save with a Combo Package
Our recommended kit, bundled at a combined priceAdd some extra items to complete your new ARTF plane.
1× Optimix Aero/Heli Fuel - 12% Nitro - 5 LitresOH1218
1× APC Propeller - 11x7 (LP11070)APCLP11070
1× JP Power Torque II 12V Starter Motor4444300
1× 12V (12 Volt) 7Ah Sealed Lead Acid (SLA) Gel Battery5510050
4× Hitec HS311 Standard Servo2213190
1× Fastrax 12V 500mA 230V Charger for Sealed Lead Acid BatteriesPX2129
1× Overlander Nimh Battery Pack LSD AA 2300mAh 4.8V Receiver Flat Premium SportOL-2380
1× Futaba 6L Sport T-FHSS Transmitter With R3106GF Receiver (Mode 2)FUT05003115-3
1× Devcon 5 Minute Epoxy Flow-Mix (14ml)DEV20445
1× Force 46 ABC Aero Engine (7.45cc)FORE-4601
Customers Also Buy
Popular with customers who buy products like the Seagull Sport Trainer V2 Low Wing
Description
The Seagull Sport Trainer V2 Low Wing SEA10N is a ready-made low-wing radio-controlled trainer aircraft for developing basic handling and aerobatic skills. Its large semi-symmetrical wing uses full-span strip ailerons, sheeted leading edges and a balsa webbed D-box construction. This combination provides a stable platform for progressing from a high-wing trainer towards low-wing flying, while also supporting early practice of knife-edge flight and four-point rolls.
The generous fuselage side area contributes to stable flight and tracking. Factory-installed pushrods, an engine mount, a painted pilot and a clear canopy are included with the airframe. The model also uses a practical tricycle undercarriage arrangement with a steerable nose leg for ground handling. Suggested power compatibility includes .32 to .46 cu. in. two-stroke glow engines or .52 cu. in. four-stroke glow engines, while operation requires a four-channel radio control system and five servos.
Specifications
- Wingspan: 1440 mm
- Length: 1244 mm
- Wing area: 610 sq. in.
- All-up weight: 5.9 lb
What's Included
- Factory-finished airframe sections covered in Oracover
- Full hardware set including wheels, fuel tank and engine mount
- Pre-shaped wire undercarriage
- Fully illustrated step-by-step instructions
The supplied hardware supports completion of the airframe, with the included wheels, fuel tank, engine mount and undercarriage covering the main installation components. The low-wing layout and tricycle undercarriage make the Sport Trainer V2 a suitable follow-on model for pilots moving beyond a conventional high-wing trainer.
Secured by Stripe
Seagull Sport Trainer V2 Low Wing Manuals & Guides
Manuals & Guides
Specifications
Arguably one of the best models ever produced for those who've mastered a high wing trainer and want to further their basic handling and aerobatic skills. The Sport Trainer's success lies partly in its large semi-symmetrical wing, full-span strip ailerons, fully sheeted leading edges and high-strength, balsa, webbed D-box construction. It's a combination that offers the budding aerobatic pilot the opportunity to experiment and hone their skills, safe in the knowledge that the Sport Trainer will soak up the punishment and won't bite. But that's just the tip of the iceberg. The generous fuselage side area provides superb stability with excellent tracking for early forays into knife-edge flight and 4-point rolls.
Like all Seagull models, the aircraft is ready-made with factory-installed pushrods, engine mount, painted pilot and crystal clear canopy.
| Wingspan (mm): | 1440 |
| Length (mm): | 1244 |
| Wing area (sq. in): | 610 |
| All-up Weight (lb): | 5.9 |
Seagull Sport Trainer V2 Low Wing Tech Specs:
Seagull Sport Trainer V2 Low Wing Key Features:
Arguably one of the best models ever produced for those who've mastered a high wing trainer and want to further their basic handling and aerobatic skills. The Sport Trainer's success lies partly in its large semi-symmetrical wing, full-span strip ailerons, fully sheeted leading edges and high-strength, balsa, webbed D-box construction. It's a combination that offers the budding aerobatic pilot the opportunity to experiment and hone their skills, safe in the knowledge that the Sport Trainer will soak up the punishment and won't bite. But that's just the tip of the iceberg. The generous fuselage side area provides superb stability with excellent tracking for early forays into knife-edge flight and 4-point rolls.
Like all Seagull models, the aircraft is ready-made with factory-installed pushrods, engine mount, painted pilot and crystal clear canopy.
Specification:
Wingspan (mm): 1440 Length (mm): 1244 Wing area (sq. in): 610 All-up Weight (lb): 5.9 - Requires 4-channel R/C with 5 servos.
- Perfect as a follow-on trainer / first low-wing model.
- Suits .32 - .46cu. in. 2-stroke or .52cu. in. 4-stroke glow engines.
- Attractive highly visible colour scheme.
- Superb build quality.
- Rugged and practical trike undercarriage arrangement.
- All hardware included.
- Steerable nose leg for good ground handling.
What's in the Box:
- Factory finished airframe sections covered in genuine Oracover
- Full hardware set including wheels, fuel tank, engine mount etc.
- Fully illustrated step-by-step instructions
- Pre-shaped wire undercarriage
Seagull Sport Trainer V2 Low Wing Tech Specs:
Key Info:
- Brand: Seagull
- Part No: SEA10N
- Barcode: 5051121278279
- Assembly Level: ARTF (Almost RTF)
- Power: Nitro
- Flying Style:
• Sport
• Trainers
Delivery & Returns
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Customer Reviews
No specific product reviews yet, why not write one?Questions & Answers
For more in depth queries, please contact us.