GBP
€ Euro
$ USD
Tamiya Buggyra Fat Fox TT-01E
Brand: Tamiya
Part No: HC-58661
In Stock: Usually ships same day
Add a radio system, steering servo, batteries and charger to your new model. Note, you may also wish to choose some bodyshell paint from our range.
ET1060
SCH-EP3000S
HD-1812MG
ORI30198DNS
Saves £30.39 over RRP
Add a better specification radio system, steering servo, higher capacity battery and fast charger to your new Tamiya model. Note, you may also wish to choose some bodyshell paint from our range.
HPI-101939
ET1060
VZ0025
ET0208
SAV-SW0231MG+
Saves £36.18 over RRP
Capture the look of Adam Lacko’s 2018 European truck racing contender with the Tamiya Buggyra Fat Fox TT-01E, part number HC-58661. This 1/14 scale R/C assembly kit combines a detailed 3-piece polycarbonate body with Tamiya’s proven TT-01 Type-E shaft-driven 4WD chassis for accessible handling and authentic racing truck presence.
The multi-piece body features separate polycarbonate rear fender and coupler parts plus moulded side mirrors and a two-piece rear bumper. Black semi-truck wheels are paired with 70mm-diameter radial tyres whose higher sidewalls promote forgiving, confidence-inspiring cornering. A comprehensive sticker set recreates the 2018 #1 livery as raced by Adam Lacko. Moulded parts offer suggested compatibility for 5mm taillight LEDs using the separately sold Tamiya LED Light Unit.
Key Features
- 1/14 scale R/C model assembly kit
- 3-piece polycarbonate body (two cab components and main body) assembled with double-sided tape
- Separate polycarbonate rear fender and coupler parts; moulded plastic side mirrors and 2-piece rear bumper
- TT-01 Type-E chassis with shaft-driven 4WD and easy handling
- Low centre of gravity layout with motor and battery mounted low for balance
- Fiberglass reinforced nylon upper deck and gear covers for improved rigidity
- 3-piece tie rod for smoother steering response
- 4-wheel double wishbone suspension with front and rear differential gears
- Black wheels with 70mm-diameter radial tyres designed for racing truck models
- Included sticker sheet recreating the sponsors and #1 livery from the 2018 season
- Moulded parts with suggested compatibility for 5mm taillight LEDs via a separately sold Tamiya LED Light Unit
- TT-01 Type-E Hop-Up Options available
Specifications
- Length: 420mm
- Width: 187mm
- Height: 188mm
What’s Included
- Tuned brushed motor
- Carson 60A ESC
- 3-piece polycarbonate body set and detail parts
Required to Complete
- 2-channel radio system
- Steering servo
- 7.2V battery pack and compatible charger
- Tamiya PS paint
Secured by Stripe
This model recreates the Buggyra Racing Fat Fox piloted in the 2018 season of the European truck racing circuit by 2017 champion Adam Lacko. The realistic body is a 3-piece set made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts. The TT-01 Type-E chassis is a proven performer, and this chassis is fitted with dedicated semi-truck wheels and tires for the model.
TT-01 E Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with wheels developed just for this model; the high sidewalls make for forgiving turns.
• 1/14 scale R/C model assembly kit. Length: 420mm, width: 187mm, height: 188mm.
• The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape.
• Separate polycarbonate rear fender and coupler parts, molded plastic side mirrors and 2-piece rear bumper.
• Included stickers recreating the sponsors and livery of the #1 truck for the 2018 season, driven by Adam Lacko.
• Black molded wheels and 70mm diameter radial tires are specifically designed for racing truck models.
• Features molded parts compatible with 5mm taillight LEDs in separately-sold Tamiya LED Light Unit.
• The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability.
• TT-01 Type-E chassis Hop-Up Options available.
• Includes Tuned Brushed motor.
• Includes Carson 60A ESC
• Requires: 2-Channel Radio, servo, 7.2volt battery pack & charger, and Tamiya PS paint.
Key Info:
- Brand: Tamiya
- Part No: HC-58661
- Barcode: 4950344065851
- Scale: 1:10
- Power Source: Electric - Brushed
- Surface Type: On Road
- Vehicle Type: Touring / Rally Car
- Build Level: Unassembled (Kit)
Free Shipping
This item is over £100, so qualifies for free standard UK shipping!
Express Shipping
Upgrade to next day from £3
Worldwide Shipping
Available at checkout
Reviews
No specific product reviews yet, why not write one?WRITE A REVIEW
Questions & Answers
Apologies we only have these with ESC.
A decent starter brushless combo would be say AB-2120002
More speed never hurts :-)
You can certainly look at upgrading the motor. The Tamiya Sport Tuned 53068 motor is popular.
After that, you can upgrade the motor and ESC together for more speed or look at a brushlesss setup such as say 2120002
Not just yet (at time of writing) - hopefully soon however.
ASK A QUESTION
For more in depth queries, please contact us.
Tamiya TT-02 Frp Batt Plt + Trsp Stay
Tamiya TT-02 Aluminium Propeller Shaft
Tamiya Front Propeller Joint
Tamiya TT-01 Aluminium Prop Joint + Shaft
Tamiya TT-02 Aluminium Propeller Joint
Tamiya 4mm Adjuster 6
Tamiya Tire (W/Wheel) (4Pcs) For 57766
Tamiya Front Tyre X2 Grasshopper II
Tamiya Motor Plate (Ba42)
Tamiya Rein. Tires B2 24mm X 4
Tamiya 59mm Adjuster Rod (1Pcs) For 58416
Tamiya 3X10mm Flange Tapping Screw
Tamiya Z Parts For 58257
Tamiya Rear Shaft Grasshopper II
Tamiya Wing For 58407